BOSCH REXROTH
3842552970
All Other Products
VF plus: conveyor section slide rail
BOSCH REXROTH
MATERIAL: 3842552970
SUMMARY: VF plus: conveyor section slide rail
Quantity in stock: 2
Quantity Details:- Hydrotech Stock: 0 can ship April 26, 2024
- Factory Stock: 2 can ship June 28, 2024
The steel slide rail is suitable for use in abrasive ambient conditions (reduced service life of the conveyor chain). It is clipped in to the section profile and fixed in place at the side via a pop rivet. The side fixing reduces the friction and the noise level to a minimum. The steel slide rail butt joints are merely chamfered. The Advanced slide rail is used in the lower run of the curve wheels.
Steel slide rail straight section (A) Steel slide rail curve wheel (B) 30°, 45°, 90°, 180° Dry, wet and abrasive environment Size:
- Straight section: all track widths
- Curve wheel 65, 90, 120
Not suitable for use in horizontal sliding curves Only Advanced or Premium slide rails can be used in vertical curvesSlide rail VFplus Steel with pop rivet (C)
Slide rail VFplus Curve wheel
|
Material |
|
| Slide rail VFplus Steel | Stainless steel |
| Slide rail curve wheel VF65 steel 30° | |
| Slide rail curve wheel VF65 steel 45° | |
| Slide rail curve wheel VF65 steel 90° | |
| Slide rail curve wheel VF65 steel 180° | |
| Slide rail curve wheel VF90 steel 30° | |
| Slide rail curve wheel VF90 steel 45° | |
| Slide rail curve wheel VF90 steel 90° | |
| Slide rail curve wheel VF90 steel 180° | |
| Slide rail curve wheel VF120 steel 30° | |
| Slide rail curve wheel VF120 steel 45° | |
| Slide rail curve wheel VF120 steel 90° | |
| Slide rail curve wheel VF120 steel 180° | |
| Pop rivet D3x8mm |
Note: Ensure gap-free assembly (without expansion joint), as foreign bodies could otherwise get trapped in the gap and damage the chain.
Note: Non-destructive dismantling of the slide rail is not possible. A target separation point of the system must therefore be defined before assembly. Overlap the steel slide rail by 10 … 15 mm on the section profile separation point. This ensures that it is still possible to pull apart the two parts.
Extend the steel slide rail over the component interfaces to ensure minimum wear and reduced noise emissions. Interruptions directly on the profile or component connection must be avoided.
Required accessories
Pop rivet D3x8mm
Number of rivets
Straight slide rail section: 1 rivet
30°, 45° curve: 2 rivets
90° curve: 3 rivets
180° curve: 6 rivets