BOSCH REXROTH
3842553036
All Other Products
VF plus: curve wheel Al
BOSCH REXROTH
MATERIAL: 3842553036
SUMMARY: VF plus: curve wheel Al
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship April 29, 2024
- Factory Stock: 1 can ship July 8, 2024
The curve wheel AL ESD provides a horizontal direction change for the conveyor chain. It enables low-friction direction changes with very small radii.
For attachment options, see the matrix
Size: 65, 90 See table for the deflection angles, more deflection angles available on request Suitable chain type: ESD conveyor chain For circuit systems without conveyor chain return in bottom run (using a curve wheel or connection drive), the appropriate cover must be used for personal safety reasons With conductive wheelCombination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel ESD |
Vertical curve |
Head drive (STS) |
Connection drive (STS) |
Center drive (STS)** |
Base unit (STS) |
90° (STS)** |
||
|
Straight |
Section profile AL open |
J |
|||||||||
|
Section profile AL closed |
J |
J |
|||||||||
|
Assembly module |
J |
J |
N |
||||||||
|
Curves |
Curve wheel ESD |
J |
J |
L2) |
L2) |
||||||
|
Vertical curve |
J |
J |
L2) |
L2) |
L1) |
||||||
|
Drives |
Head drive (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
||||
|
Connection drive (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
N |
||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
N |
N |
|||
|
Return Unit |
Base unit (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
L2) |
N |
L2) |
L2, 3) |
|
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
L2) |
L2) |
N |
N |
L2) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||
|
N |
not possible |
||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Curve wheel AL VFplus 180°
Curve wheel AL VFplus 90°
Curve wheel AL VFplus 45°
Curve wheel AL VFplus 30°
Curve wheel AL
Note: High-pressure cleaning of the ball bearings is not permitted.