BOSCH REXROTH
R190714200
All Other Products
Cam Roller Guides Blocks Size 042
BOSCH REXROTH
MATERIAL: R190714200
SUMMARY: Cam Roller Guides Blocks Size 042
Quantity in stock: 2
Quantity Details:- Hydrotech Stock: 0 can ship June 6, 2024
- Factory Stock: 2 can ship August 8, 2024
Technical data
Size |
42 | |
Fy max 1) |
N |
3000 |
F0y max 1) |
N |
3000 |
Fz max |
N |
1500 |
F0z max |
N |
2500 |
Mx max |
Nm |
27 |
M0x max |
Nm |
42 |
My max |
Nm |
63 |
M0y max |
Nm |
106 |
Mz max |
Nm |
127 |
M0z max |
Nm |
127 |
vmax 2) |
m/s |
10 |
amax |
m/s² |
50 |
Temperature stability |
-20 °C ... +80 °C | |
Weight |
kg |
1.03 |
1) | Observe the permissible lateral force of the guide rail (see notes for mounting). |
2) | For average load. |
Attention: Not to be used for the life expectancy calculation! | |
For service life calculations use the load ratings and moments given in the tables for service life calculations. |
Load ratings and moments for calculating the service life
Size |
42 | |
Cy |
N |
17150 |
C0y |
N |
10200 |
Cz |
N |
10050 |
C0z |
N |
4900 |
MX |
Nm |
162 |
M0x |
Nm |
97 |
My |
Nm |
430 |
M0y |
Nm |
258 |
Mz |
Nm |
729 |
M0z |
Nm |
433 |
Observe maximum permissible loads due to forces and moments as shown in the "Technical data” table! |
Legend
Symbol |
Description |
Unit |
Picture |
Cy |
Dynamic load capacity in y-direction |
N |
|
C0y |
Static load capacity in y-direction |
N |
|
Cz |
Dynamic load capacity in z-direction |
N |
|
C0z |
Static load capacity in z-direction |
N |
|
Fy max |
Maximum dynamic load in y-direction |
N |
|
F0y max |
Maximum static load due to a resulting force in the y-direction |
N |
|
Fz max |
Maximum dynamic load in z-direction |
N |
|
F0z max |
Maximum static load due to a resulting force in the z-direction |
N |
|
Mx max |
Maximum permissible dynamic torsional moment about the x-axis |
Nm |
|
M0x max |
Maximum permissible static torsional moment about the x-axis |
Nm |
|
My max |
Maximum permissible dynamic torsional moment about the y-axis |
Nm |
|
M0y max |
Maximum permissible static torsional moment about the y-axis |
Nm |
|
Mz max |
Maximum permissible dynamic torsional moment about the z-axis |
Nm |
|
M0z max |
Maximum permissible static torsional moment about the z-axis |
Nm |
|
vmax |
Maximum permissible speed |
m/s |
|
amax |
Maximum acceleration travel |
m/s2 |
|
MX |
Dynamic torsional moment about the x-axis |
Nm |
|
M0x |
Static torsional moment about the x-axis |
Nm |
|
My |
Dynamic torsional moment about the y-axis |
Nm |
|
M0y |
Static torsional moment about the y-axis |
Nm |
|
Mz |
Dynamic torsional moment about the z-axis |
Nm |
|
M0z |
Static torsional moment about the z-axis |
Nm |
Rigidity
An increased rigidity can be achieved with higher pre-tensioning force by using eccentric setting.
Acceleration
High accelerations are permitted if slippage is avoided. For this, the pre-tensioning force FV by increasing the eccentric setting; see diagram.
Attention: The maximum permissible load is reduced by the increase of the pre-tensioning force.
1) | Permissible range |
2) | a = acceleration |
3) | Fv/Cy = standard setting |
Optionally, a separate lubrication unit is available for each cam roller of the profile runner block.
Material number: R1910 442 00We recommend the complete lubrication with four lubrication units.