BOSCH REXROTH
Z1FG10A5-3X/V
R900566445
Flow Control Throttle Valves
Flow-/throttle valves: Z2FG* 10.-2x/
BOSCH REXROTH
MATERIAL: R900566445
SUMMARY: Flow-/throttle valves: Z2FG* 10.-2x/
Quantity in stock: 0
The valve type Z.FG is a throttle valve in sandwich plate design. It is used for the flow limitation of one or two actuator ports.
Two symmetrically arranged throttle valves limit flows in both directions.
In case of throttling, the hydraulic fluid is directed through channel A1 or B1 via throttling point (1) formed by the control edge (2) and the throttle spool (3.1) to actuator A2 or B2. The throttle spool (3.1) can be axially adjusted via the spindle (4) for adjustment of the flow via the throttling point (1). The flow depends on the pressure differential and viscosity.
In version "P", throttling is realized in channel P. Channels A and B have free flow. In version "A" or "B", the channel without throttling has free flow.
Type Z2FG 10-5-3X/V
➀ |
component side |
➁ |
plate side |
01 |
02 |
03 |
04 |
05 |
06 |
07 |
08 |
09 |
||
Z |
FG |
10 |
5 |
– |
3X |
/ |
V |
* |
01 |
Sandwich plate valve |
Z |
Number of functions |
||
02 |
1 – Throttling in channel A, B or P |
1 |
2 – Throttling in channel A and B |
2 |
|
03 |
Throttle valve |
FG |
04 |
Size 10 |
10 |
05 |
Throttling in channel A and B |
– |
Throttling in channel A |
A |
|
Throttling in channel B |
B |
|
Throttling in channel P |
P |
|
Adjustment type |
||
06 |
Spindle with internal hexagon and scale |
5 |
07 |
Component series 30 ... 39 (30 ... 39: unchanged installation and connection dimensions) |
3X |
Seal material |
||
08 |
FKM seals |
V |
Observe compatibility of seals with hydraulic fluid used. (Other seals upon request) |
||
09 |
Further details in the plain text |
* |
general
Size |
10 | ||
Weight (approx.) |
Version "A" |
kg |
3 |
Version "B" |
kg |
3 | |
Version "P" |
kg |
2.5 | |
Version "-" |
kg |
3 | |
Installation position |
any | ||
Ambient temperature range |
°C |
-20 … +80 |
hydraulic
Size |
10 | ||
Maximum operating pressure |
bar |
315 | |
Maximum flow |
l/min |
160 | |
Hydraulic fluid |
Mineral oil (HL, HLP) according to DIN 51524, other hydraulic fluids on request | ||
Hydraulic fluid temperature range |
°C |
-20 … +80 | |
Viscosity range |
mm²/s |
10 … 800 | |
Maximum admissible degree of contamination of the hydraulic fluid 1) |
Class 20/18/15 according to ISO 4406 (c) |
1) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
For applications outside these parameters, please consult us!
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves at constant throttle position
Type Z1FG 10 A5-3X/V
Type Z1FG 10 B5-3X/V
Type Z1FG 10 P5-3X/V
➀ |
component side |
➁ |
plate side |
Type Z2FG 10 –5-3X/V
Version "-"
Dimensions in mm
1 |
Name plate |
2 |
Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8) Left rotation = higher flow Right rotation = lower flow |
3 |
4 valve mounting bores |
4 |
R-ring plate |
5 |
Identical seal rings for ports A, B, P, TA, TB |
6 |
Porting pattern according to ISO 4401-05-04-0-05 |
Version "A"
Dimensions in mm
1 |
Name plate |
2 |
Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8) Left rotation = higher flow Right rotation = lower flow |
3 |
4 valve mounting bores |
4 |
R-ring plate |
5 |
Identical seal rings for ports A, B, P, TA, TB |
6 |
Porting pattern according to ISO 4401-05-04-0-05 |
Version "B"
Dimensions in mm
1 |
Name plate |
2 |
Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8) Left rotation = higher flow Right rotation = lower flow |
3 |
4 valve mounting bores |
4 |
R-ring plate |
5 |
Identical seal rings for ports A, B, P, TA, TB |
6 |
Porting pattern according to ISO 4401-05-04-0-05 |
Version "P"
Dimensions in mm
1 |
Name plate |
2 |
Adjustment type "5" Spindle with internal hexagon and scale for flow cross-section adjustment (internal hexagon SW8) Left rotation = higher flow Right rotation = lower flow |
3 |
4 valve mounting bores |
4 |
R-ring plate |
5 |
Identical seal rings for ports A, B, P, TA, TB |
6 |
Porting pattern according to ISO 4401-05-04-0-05 |
Valve mounting screws (separate order)
4 hexagon socket head cap screws ISO 4762 - M6 - 10.9-flZn-240h-L
Friction coefficient μtotal = 0.09 to 0.14,
Tightening torque MA = 12 Nm ± 10%