BOSCH REXROTH
R-IBILRS485/422-PRO-PAC
R911170442
I/O Rexroth Inline Function modules
BOSCH REXROTH
MATERIAL: R911170442
SUMMARY: I/O Rexroth Inline Function modules
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship May 2, 2024
- Factory Stock: 1 can ship June 20, 2024
This module is designed for use within an Inline station. It enables the operation of standard peripheral devices with a serial interface on a bus system.
General data
Type |
R-IB IL RS485/422-PRO-PAC | |
Weight 1) |
g |
135 |
Operating mode |
Process data operation with 12 bytes | |
Sensor connection type |
2-, 3-wire technology | |
Ambient temperature (operation) |
-25 °C ... +55 °C | |
Ambient temperature (storage/transport) |
-25 °C ... +85 °C | |
Permissible relative humidity (operation) |
10 % ... 95 % acc. to DIN EN 61131-2 | |
Permissible relative humidity (storage/transport) |
10 % ... 95 % acc. to DIN EN 61131-2 | |
Air pressure (operation) |
70 kPa ... 106 kPa (up to 3000 m above sea level) | |
Air pressure (storage/transport) |
70 kPa ... 106 kPa (up to 3000 m above sea level) | |
Protection type |
IP20, IEC 60529 | |
Protection class |
III, VDE 0106, IEC 60536 |
1) | Including plug |
Connection data
Type |
R-IB IL RS485/422-PRO-PAC | |
Designation |
Inline connection plug | |
Connection type |
Tension spring modules | |
Conductor cross-section solid/flexible/AWG |
0.2 mm² ... 1.5 mm² 0.2 mm² ... 1.5 mm² 24 ... 16 |
Interface local bus
Type |
R-IB IL RS485/422-PRO-PAC | |
Connection type |
Data ranking | |
Transmission speed |
kBit/s |
500 |
Serial interfaces
Type |
R-IB IL RS485/422-PRO-PAC | ||
Designation 1) |
RS 485 half duplex or RS 422 full duplex | ||
Typical line terminating resistor |
Ω |
120 | |
Maximum permitted input difference voltage |
V |
± 5.7 | |
Typical hysteresis |
mV |
50 | |
Input sensitivity |
-0.2 V ... +0.2 V | ||
Minimum output difference voltage |
With 100 kΩ load |
V |
± 2 |
With 54 kΩ load |
V |
± 1.5 | |
Typical short-circuit output current |
mA |
± 80 |
1) | Can only be operated as an alternative, electrical data acc. to IIO (RS) 485, IIO (RS) 422, CCITT V.11 |
Inline potentials/performance balance
Type |
R-IB IL RS485/422-PRO-PAC | |
Logic voltage UL |
V DC |
7.5 |
Typical current consumption from UL |
mA |
170 |
Maximum current consumption from UL 1) |
mA |
260 |
Typical power consumption total |
W |
≈ 1.275 |
Maximum power consumption total 1) |
W |
1.95 |
1) | All connections in the serial interface short-circuited |
Supply of module electronics via the bus coupler
Type |
R-IB IL RS485/422-PRO-PAC | |
Connectivity technology |
Potential jumpers |
Power dissipation
Type |
R-IB IL RS485/422-PRO-PAC | |
Power dissipation in the assembly PEL |
W |
1.4 |
Power dissipation in the housing PHOU 1) |
W |
≤ 1.4 |
1) | Within the admissible operating temperature |
Restriction of simultaneity, derating
Type |
R-IB IL RS485/422-PRO-PAC | |
TA ≤ 50 °C |
No derating | |
TA > 50 °C |
IQ = 4 A IQ: total current of the cross jumpering IM/IS/GND |
Protective devices
Type |
R-IB IL RS485/422-PRO-PAC | |
Protective devices |
None |
Electrical isolation/insulation of the voltage ranges
Type |
R-IB IL RS485/422-PRO-PAC | |
Common potentials |
||
The control and data lines for the serial interface are galvanically on the same potential. FE represents a separate potential area. |
||
Separate potentials in the system of bus coupler/feed module and I/O module |
||
Test distance |
Test voltage | |
5 V supply incoming remote bus/7.5 V supply (bus logic) |
500 V AC, 50 Hz, 1 min. | |
5 V supply to further remote bus/7.5 V supply (bus logic) |
500 V AC, 50 Hz, 1 min. | |
RS 485/422 interface/7.5 V power supply (bus logic) |
500 V AC, 50 Hz, 1 min. | |
RS 485/422 interface/24 V power supply (peripherals) |
500 V AC, 50 Hz, 1 min. | |
RS 485/422 interface/function earth |
500 V AC, 50 Hz, 1 min. | |
7.5 V supply (bus logic)/24 V supply (peripherals) |
500 V AC, 50 Hz, 1 min. | |
7.5 V supply (bus logic)/function earth |
500 V AC, 50 Hz, 1 min. | |
24 V supply (peripherals)/function earth |
500 V AC, 50 Hz, 1 min. |
Error messages to the higher-level control or computer system
Type |
R-IB IL RS485/422-PRO-PAC | |
Error message |
None |
Approvals |
The current approvals can be found at www.boschrexroth.com. |
Dimensions
Type |
R-IB IL RS485/422-PRO-PAC | |
A |
mm |
24.4 |
B |
mm |
136.8 |
C |
mm |
71.5 |
Note on dimensions |
The depth applies when using a support rail TH 35-7.5 (acc. to EN 60715). |