BOSCH REXROTH
R-IBILAO2/UI-PAC
R911173634
All Other Products
I/O Rexroth Inline Analogue modules
BOSCH REXROTH
MATERIAL: R911173634
SUMMARY: I/O Rexroth Inline Analogue modules
Quantity in stock: 1
Quantity Details:- Hydrotech Stock: 0 can ship May 8, 2024
- Factory Stock: 1 can ship June 26, 2024
This module is designed for use within an Inline station. It is used to output analog current or voltage signals.
General data
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Weight 1) |
g |
66 |
|
Ambient temperature (operation) |
-25 °C ... +55 °C | |
|
Ambient temperature (storage/transport) |
-25 °C ... +85 °C | |
|
Permissible relative humidity (operation) |
10 % ... 95 % acc. to DIN EN 61131-2 | |
|
Permissible relative humidity (storage/transport) |
10 % ... 95 % acc. to DIN EN 61131-2 | |
|
Air pressure (operation) |
70 kPa ... 106 kPa (up to 3000 m above sea level) | |
|
Air pressure (storage/transport) |
70 kPa ... 106 kPa (up to 3000 m above sea level) | |
|
Protection type |
IP20 | |
|
Protection class |
III, IEC 61140, EN 61140, VDE 0140-1 | |
| 1) | Including plug |
Connection data
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Designation |
Inline connection plug | |
|
Connection type |
Spring-cage connection | |
|
Conductor cross-section solid/flexible/AWG |
0.08 mm² ... 1.5 mm² 0.08 mm² ... 1.5 mm² 28 ... 16 |
|
Interface local bus
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Connection type |
Inline data jumper | |
|
Number |
2 | |
|
Transmission speed |
kBit/s |
500 |
|
Transfer physics |
Copper | |
Inline potentials/performance balance
|
Type |
R-IB IL AO 2/UI-PAC | ||
|
Logic voltage UL 1) |
V DC |
7.5 | |
|
Typical current consumption from UL |
mA |
55 | |
|
Maximum current consumption from UL |
mA |
65 | |
|
Peripheral supply voltage UANA |
V DC |
24 | |
|
Typical current consumption from UANA |
No load |
mA |
24 |
|
Voltage nominal load UOUT1/2 = 10 V, RL = 1 kΩ |
mA |
38 | |
|
Power nominal load IOUT1/2 = 20 mA, RL = 0 Ω |
mA |
65 | |
|
Maximum current consumption from UANA |
No load |
mA |
30 |
|
Voltage nominal load UOUT1/2 = 10 V, RL = 1 kΩ |
mA |
45 | |
|
Power nominal load IOUT1/2 = 20 mA, RL = 0 Ω |
mA |
75 | |
|
Typical power consumption |
Voltage nominal load UOUT1/2 = 10 V, RL = 1 kΩ |
W |
1.32 |
|
Power nominal load IOUT1/2 = 20 mA, RL = 0 Ω |
W |
1.97 | |
| 1) | Via potential jumpers |
Analog outputs
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Number of analog outputs |
2 | |
|
Connectivity technology |
2-wire technology (shielded, twisted pair) | |
|
Resolution D/A |
bits |
12 |
|
D/A conversion time |
µs |
10 |
|
Output value representation |
12 bits (11 bits + sign) | |
|
Data formats |
IB IL | |
|
Process data update |
Bus synchronous | |
|
Permissible cable length 1) |
m |
≤ 250 |
|
Short-circuit protection, overload protection |
Electronic | |
|
Transient protection |
Suppressor diode | |
| 1) | The information relates to nominal operation in compliance with the installation regulations and refer to the following reference line type: Shielded power plant line: LiYCY; 2 x 2 x 0.5 mm2; VDE0812 |
Analog outputs, current
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Current output signal |
0 mA ... 20 mA 4 mA ... 20 mA -20 mA ... 20 mA |
|
|
Output load current output |
Ω |
≤ 450 |
|
Precision |
Typ. 0.1 % (of the output range end value) | |
Analog outputs, voltage
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Voltage output signal |
0 V ... 10 V -10 V ... 10 V |
|
|
Output load voltage output |
kΩ |
> 1 |
|
Precision |
Typ. 0.1 % (of the output range end value) | |
Programming data
|
Type |
R-IB IL AO 2/UI-PAC | |
|
ID code (hex) |
5B | |
|
ID code (dec) |
91 | |
|
Length code (hex) |
04 | |
|
Length code (dec) |
04 | |
|
Process data channel |
bits |
64 |
|
Input address room |
byte |
8 |
|
Output address room |
byte |
8 |
|
Parameter channel (PCP) |
byte |
0 |
|
Register length (bus) |
bits |
64 |
Fieldbus data telegram
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Need for parameter data |
byte |
10 |
|
Need for configuration data |
byte |
5 |
Error messages to the higher-level control or computer system
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Error message |
Upon failure of the internal peripheral power supply: Peripheral error message to the bus coupler Upon failure of the peripheral power supply: Message in the diagnostic code (in format IB IL) Upon short-circuit/overload of outputs: Message in the diagnostic code (in format IB IL) Upon invalid configuration: Message in the diagnostic code (in format IB IL) |
|
Electrical isolation/insulation of the voltage ranges
|
Type |
R-IB IL AO 2/UI-PAC | |
|
Test distance |
Test voltage | |
|
7.5 V supply (bus logic), 24 V supply UANA/peripherals |
500 V AC, 50 Hz, 1 min. | |
|
7.5 V supply (bus logic), 24 V supply UANA/function earth |
500 V AC, 50 Hz, 1 min. | |
|
24 V supply (peripherals)/function earth |
500 V AC, 50 Hz, 1 min. | |
Conformity
|
Type |
R-IB IL AO 2/UI-PAC | ||
|
Conforms with |
|||
|
Testing of interference immunity acc. to EN 61000-6-2 |
Discharge of static electricity (ESD) |
Criterion B; 6 kV contact discharge; 8 kV air discharge acc. to EN 61000-4-2/IEC 61000-4-2 | |
|
Electro-magnetic fields |
Criterion A; field strength: 10 V/m acc. to EN 61000-4-3/IEC 61000-4-3 | ||
|
Fast transients (burst) |
Criterion B; 2 kV acc. to EN 61000-4-4/IEC 61000-4-4 | ||
|
Transient overvoltage (surge) |
Criterion B; supply lines DC: ±0.5 kV/±0.5 kV (symmetric/asymmetric); ±1 kV on shielded I/O lines acc. to EN 61000-4-5/IEC 61000-4-5 | ||
|
Line-fed disturbances |
Criterion A; test voltage 10 V acc. to EN 61000-4-6/IEC 61000-4-6 | ||
|
Testing of disturbance transmission acc. to EN 61000-6-3 |
Radio disturbance characteristics |
Class A acc. to EN 55022 | |
|
Approvals |
|
The current approvals can be found at www.boschrexroth.com. |
Dimensions
|
Type |
R-IB IL AO 2/UI-PAC | |
|
A |
mm |
12.2 |
|
B |
mm |
136.8 |
|
C |
mm |
71.5 |
|
Note on dimensions |
The depth applies when using a support rail TH 35-7.5 (acc. to EN 60715). | |