BOSCH REXROTH
R044221240
BOSCH REXROTH
MATERIAL: R044221240
SUMMARY:
Quantity in stock: 0
Load capacities and load moments
Size |
7 | 9/M3 | 12 | 15 | 20 | ||
C 1) |
N |
860 | 1180 | 2310 | 4200 | 7900 | |
C0 1) |
N |
1400 | 2100 | 3470 | 6260 | 12230 | |
Mt 2) |
Nm |
3.1 | 5.4 | 13.7 | 31.2 | 81.4 | |
Mt0 2) |
Nm |
5.1 | 9.6 | 20.6 | 46.3 | 126 | |
ML 2) |
Nm |
1.9 | 3.6 | 7.9 | 18.3 | 51.7 | |
ML0 2) |
Nm |
3.2 | 6.4 | 11.8 | 27 | 80 |
1) | Calculated values as per DIN 636, Part 2 |
2) | Calculated values (derived from C, C0) |
General technical data
Size |
7 | 9/M3 | 12 | 15 | 20 | |
amax 1) |
m/s² |
250 | ||||
vmax 2) |
m/s |
3 | ||||
m |
g |
9 | 16 | 33 | 47 | 177 |
Operating conditions |
||||||
Size |
7 | 9/M3 | 12 | 15 | 20 | |
Permissible ambient temperature (min ... max) 3) |
-10 °C ... +80 °C |
1) | Only with pre-tensioned systems. For non-pre-tensioned systems: amax = 50 m/s2 |
2) | Speeds of up to 5 m/s are possible. Service life is limited by increased wear to plastic parts. |
3) | Brief peaks up to 100°C are permissible. |
Note on dynamic load capacities and moments (see the table)
Determination of the dynamic load ratings and moments is based on a total travel of 100,000 m.
Often only 50,000 m are actually stipulated. For comparison: Multiply values C, Mt and ML from the table by 1.26.
Observe friction of the different seals. See document “Technical data”.
Technical data
Accuracy classes
Legend
Symbol |
Description |
Unit |
amax |
Maximum acceleration travel |
m/s2 |
C |
Dynamic load capacity |
N |
C0 |
Static load capacity |
N |
m |
Mass |
g |
ML |
Dynamic longitudinal moment load capacity |
Nm |
ML0 |
Static longitudinal moment load capacity |
Nm |
Mt |
Dynamic torsional moment load capacity |
Nm |
Mt0 |
Static torsional moment laod capacity |
Nm |
vmax |
Maximum permissible speed |
m/s |
Rigidity of the miniature ball rail systems at pretension
Mounted runner block with 4 screws, strength class 12.9
lift-off load
Down load
1) | 4 lubrication holes |
2) | Sizes 7 to 12 |
3) | Funnel-type lube nipple |
4) | Sizes 15 - 20 |
Dimensions
Size |
7 | 9/M3 | 12 | 15 | 20 | |
A |
mm |
17 | 20 | 27 | 32 | 46 |
A2 |
mm |
7 | 9 | 12 | 15 | 20 |
A3 |
mm |
5 | 5.5 | 7.5 | 8.5 | 13 |
B |
mm |
24 | 31 | 34.8 | 43 | 66 |
B1 |
mm |
14.9 | 20.7 | 21.6 | 27.2 | 45.1 |
B2 |
mm |
- | 46 | 69 | ||
E1 |
mm |
12 | 15 | 20 | 25 | 38 |
E2 |
mm |
8 | 10 | 15 | 20 | 38 |
H |
mm |
8 | 10 | 13 | 16 | 25 |
H1 Without longitudinal seal |
mm |
6.5 | 8 | 10 | 12 | 17.5 |
H1 With longitudinal seal |
mm |
- | 12.65 | 18.15 | ||
K |
mm |
- | 4 | |||
N3 |
mm |
2.5 | 3 | 3.5 | 4 | 6 |
N5 |
mm |
- | 2.1 | 3.1 | ||
S2 |
mm |
M2 | M3 | M4 | ||
V1 |
mm |
2 | 2.8 | 3.3 | 4.7 | 7 |
The runner blocks are delivered on a mounting aid.