Hydrotech ecommerce supports the continental US only

HENGST OF NORTH AMERICA
1007310B
R928033029

Name: HENGST OF NORTH AMERICA 1007310B
Brand: HENGST OF NORTH AMERICA
SKU: 1380337
Price: 922.15 USD
Availability: OutOfStock

$922.15

HENGST OF NORTH AMERICA

MATERIAL: R928033029

SUMMARY:

Have Product Questions?
Schedule Your Free Support Call Here!

Quantity in stock: 0

Add to Cart

The 350LE(N) inline filter is suitable for installation into pressure lines.

It basically consists of filter head (1), a screwable filter bowl (2), filter element (3) as well as mechanical/visual maintenance indicator (4). In case of filters with low-pressure-differential-stable filter elements (= code letter pressure differential A), there is an assembled bypass valve (5) by default.

Via the inlet, the fluid reaches the filter element where it is cleaned. The dirt particles filtered out settle in the filter element. Via the outlet, the filtered fluid enters the hydraulic circuit. The filter housing and all connection elements are designed so that pressure peaks – as they may e.g. occur in case of abrupt opening of large control valves due to the accelerated fluid quantity - can be securely absorbed. As of size 0160, the standard equipment comprises a drain screw (6). With size 1000, the filter bowl has a two-part set-up. In this connection, the filter pipe is secured in the filter head against rotation.

For integration of the maintenance indicator into an electric circuit, the mechanical/visual maintenance indicator may be amended by an electronic switching element (7). To this end, the electronic switching element must be attached to the mechanical/visual maintenance indicator and held by means of a locking ring. The electronic switching elements are connected via a mating connector or a cable connection.

The electronic switching element must be ordered separately.

Inline filters are used in hydraulic systems for separating solid materials from fluids and lubricating oils.

Notice:

If the maintenance indicator for the element exchange is not observed, the bypass valve will open if the pressure differential increases. In this way, one part of the flow reaches the clean side of the filter without being filtered. Thus, effective filtration is no longer guaranteed.

350LE(N)

01	02	03		04	05	06		07		08		09		10
350LE			–				–		–		–		‒

Frame size
01	Inline filter 350 bar							350LE
Filter element
02	with filter element according to DIN 24550							N
Size
03	LEN... (filter element according to DIN 24550)							0040
								0063
								0100
								0160
								0250
								0400
								0630
								1000
	LE... (filter element according to Bosch Rexroth standard)							0130
	LE... (filter element according to Bosch Rexroth standard)							0150
Filter rating in μm
04	Nominal		Stainless steel wire mesh, cleanable					G10
								G25
								G40
								G60
								G100
	Absolute (ISO 16889; βx(c) ≥ 200)		Non-woven glass fiber media, not cleanable					H3XL
								H6XL
								H20XL
			Glass fiber material generation 5, non-reusable, not cleanable					PWR10
Pressure differential
05	max. admissible pressure differential of the filter element 30 bar, with bypass valve 7 bar							A00
05	max. admissible pressure differential of the filter element 330 bar, without bypass valve							B00
Element design
06	Standard adhesive in connection with material steel, tin-plated							00
06	Special adhesive in connection with element material stainless steel							HV 1)
Maintenance indicator
07	Maintenance indicator, mech./visual, switching pressure 2.2 bar - bypass cracking pressure 3.5 bar							V2,2
	Maintenance indicator, mech./visual, switching pressure 5.0 bar - bypass cracking pressure 7 bar							V5,0
	Maintenance indicator, mech./visual, switching pressure 8 bar - without bypass valve							V8,0
Seal
08	NBR							M
08	FKM							V
	EPDM							E 2)
Connection
09	Frame size	0040	0063-0100	0130-0150	0160-400	0630-1000
	Connection	0040	0063-0100	0130-0150	0160-400	0630-1000
	G1/2	●	X				Pipe thread according to ISO 228	R2
	G3/4	X	X					R3
	G1	X	●	X				R4
	G1 1/4			●	X			R5
	G1 1/2			X	●			R6
	G 2					●		R8
	SAE 1 1/2″				X		SAE flange 6000 psi	S6
	SAE 2″					X	SAE flange 6000 psi	S8
	SAE 10	X					Pipe thread according to SAE J1926	U3
	SAE 12		X					U4
	SAE 20			X				U5
	SAE 24				X			U6
	● =	Standard port
	X =	Alternative connection possibility
Supplementary information
10	Manufacturer's inspection certificate M according to DIN 55350 T18							Z1
1)	Only in connection with FKM and EPDM seal
2)	Only in connection with maintenance indicator V5.0
Further versions (filter materials, connections,...) are available upon request.

general

Size				0040	0063	0100	0130	0150	0160	0250	0400	0630	1000
Installation position				vertical
Ambient temperature range		ϑ	°C	-30 … +100					-10 … +65
Weight		m	kg	5.7	6.3	7	10.5	11.2	22.7	27.5	35.2	66.4	140.3
Volume			l	0.25	0.35	0.52	0.9	1.1	1.3	1.9	3	4.5	6.5
Material	Filter head			GGG
	Filter bowl			Steel
	Bypass valve			Aluminum / steel / POM
	Seals			NBR / FKM

Hydraulic fluid		Classification	Suitable sealing materials	Suitable adhesive	Standards
Mineral oil		HLP	NBR	Standard	DIN 51424
Bio-degradable	Insoluble in water	HETG	NBR		VDMA 24568
	Insoluble in water	HEES	FKM		VDMA 24568
	Soluble in water	HEPG	FKM		VDMA 24568
Flame-resistant	Water-free	HFDU, HFDR	FKM		VDMA 24317
	Containing water	HFAS	NBR		DIN 24320
		HFAE	NBR		DIN 24320
		HFC	NBR		VDMA 24317
	Skydrol	‒	EPDM	Special “H”	‒

Important information on hydraulic fluids!

For more information and data on the use of other hydraulic fluids, please refer to data sheet 90220 or contact us! Flame-resistant – containing water: Due to possible chemical reactions with materials or surface coatings of machine and system components, the service life with these hydraulic fluids may be less than expected. Filter materials made of filter paper P must not be used, filter elements with glass fiber material have to be used instead. Bio-degradable: If filter materials made of filter paper are used, the filter life may be shorter than expected due to material incompatibility and swelling.

hydraulic

Size			0040	0063	0100	0130	0150	0160	0250	0400	0630	1000
Operating pressure	pmax	bar	350
Hydraulic fluid temperature range	ϑ	°C	-10 … +100
Minimum conductivity of the medium		pS/m	300
Fatigue strength according to ISO 10771	Load cycles		> 10⁶ with operating pressure
Filtration direction			From the outside to the inside

For applications outside these parameters, please consult us!

Filter element (measured with mineral oil HLP46 according to DIN 51524)

Spec. weight: < 0.9 kg/dm3

Δp-Q characteristic curves for complete filter, recommended initial Δp for design = 1.5 bar

Selection of the perfect filter is made possible by our online “Bosch Rexroth FilterSelect“ design software.

350LEN0040-H3XL

350LEN0063-H3XL

350LEN0100-H3XL

350LE0130-H3XL

350LE0150-H3XL

350LEN0160-H3XL

350LEN0250-H3XL

350LEN0400-H3XL

350LEN0630-H3XL

350LEN1000-H3XL

350LEN0040-H10XL

350LEN0063-H10XL

50LEN0100-H10XL

350LE0130-H10XL

350LE0150-H10XL

350LEN0160-H10XL

350LEN0250-H10XL

350LEN0400-H10XL

350LEN0630-H10XL

350LEN1000-H10XL

350LE(N)

NG	A1	A2	A3 1)	A4	A5	ØB3	ØB4	B11 2)	C1 - Standard	ØC2 - Standard	C1 - SAE	ØC2 - SAE	C2	C4	D1	D2	D3	D4	D5	D6	ØW1	ØW2	W3	W5	W6	SW
	mm	mm	mm	mm	mm	mm	mm	mm		mm		mm		mm		mm	mm	mm	mm	mm	mm	mm	mm	mm	mm	mm
0040	203	115	80	158	25	64	85	92	G 1/2 G 3/4 G 1	28	SAE 10 7/8-12 UNF-2B	34			M6	8	32.5		30	25	32	47		52	20	32
0063	266	115	80	221	25	64	85	92	G1 G 1/2 G 3/4	41	SAE 12 1 1/16-12 UN-2B	34			M6	8	32.5		30	25	32	47		52	20	32
0100	356	115	80	311	25	64	85	92	G1 G 1/2 G 3/4	41	SAE 12 1 1/16-12 UN-2B	34			M6	8	32.5		30	25	32	47		52	20	32
0130	328	150	140	273	40	92	118	132	G1 1/4 G 1 G 1 1/2	51	SAE 20 1 5/8-12 UN-2B	58			M6	8	40		30	40	32	47		52	15	32
0150	364	150	140	324	40	92	118	132	G1 1/4 G 1 G 1 1/2	51	SAE 20 1 5/8-12 UN-2B	58			M6	8	40		30	40	32	47		52	15	32
0160	322	170	140	262	50	114	140	164	G1 1/2 G1 1/4	56	SAE 24 1 7/8-12 UN-2B SAE 1 1/2″, 6000 psi	65	M16	22	M8	12	35		30	50	32	32		52	10	32
0250	412	170	140	352	50	114	140	164	G1 1/2 G1 1/4	56	SAE 24 1 7/8-12 UN-2B SAE 1 1/2″, 6000 psi	65	M16	22	M8	12	35		30	50	32	32		52	10	32
0400	562	170	140	502	50	114	140	164	G1 1/2 G1 1/4	56	SAE 24 1 7/8-12 UN-2B SAE 1 1/2″, 6000 psi	65	M16	22	M8	12	35		30	50	32	32		52	10	32
0630	605	210	160	540	60	140	185	204	G 2	72	SAE 2", 6000 psi		M20	30	M12	12	15	50	40	60	32	32	10	52	5	41
1000	843	210	650	778	60	190	185	204	G 2	72	SAE 2", 6000 psi		M20	30	M12	12	15	50	40	60	32	32	10	52	5	41

1)	Servicing height for filter element exchange
2)	if there is no maintenance indicator

Installation

The max. operating pressure of the system must not exceed the max. admissible operating pressure of the filter (see name plate). During assembly of the filter (observe the tightening torque), the flow direction (direction arrows) and the required servicing height of the filter element are to be considered. Easy filter element exchange is guaranteed in the installation position filter bowl vertically downwards. The maintenance indicator must be arranged in a well visible way. Remove the plastic plugs in the filter inlet and outlet. Ensure that the system is assembled without tension stress. The optional electric maintenance indicator is connected via the electronic switching element with one or two switching points, which is attached to the mechanical/visual maintenance indicator and held by means of the locking ring.

Commissioning

Commission the system.

Notice:

There is no bleeding provided at the filter.

Maintenance

If at operating temperature, the red indicator pin reaches out of the mechanical/visual maintenance indicator and/or if the switching process in the electronic switching element is triggered, the filter element is contaminated and needs to be replaced and cleaned respectively. The material number of the corresponding replacement filter element is indicated on the name plate of the complete filter. It must comply with the material number on the filter element. Decommission the system. The operating pressure is to be built up on the system side.

Notice:

There is no bleeding provided at the filter.

Via the drain screw (from NG0160 fitted by default), the oil on the dirt side can be drained. Screw off the filter bowl (and/or bottom with NG1000). Remove the filter element from the spigot by rotating it slightly. Clean the filter components, if necessary. Check the seals at the filter bowl for damage and renew them, if necessary. Filter elements made of wire mesh can be cleaned. Install the new or cleaned filter element on the spigot again by slightly rotating it. The filter is to be assembled in reverse order. The torque specifications (“Tightening torques” chapter) are to be observed. Commission the system.

Warning:

Assembly and disassembly only with depressurized system! Filter is under pressure! Remove the filter bowl only if it is depressurized! Do not exchange the maintenance indicator while the filter is under pressure! If the flow direction is not considered during the assembly, the filter element will be destroyed. Particles will get into the system and damage downstream components.

Notice:

All works at the filter only be trained specialists. Functional and safety warranty only applicable when using genuine Bosch Rexroth spare parts! Warranty becomes void if the delivered item is changed by the ordering party or third parties or improperly mounted, installed, maintained, repaired, used or exposed to environmental condition that do not comply with the installation conditions.

Notices:

Presentation contains mechanical optical maintenance indicator (1) and electronic switching element (2) (3). Switching elements with increased switching power at request.

Electronic switching elements

WE-.SP

Electronic switching elements

WE-.SP

Operating temperature -30 … +85 °C

Data sheet

Spare parts & repair

Electronic switching elements

WE-S02

Electronic switching elements

WE-S02

Max. operating pressure 40 bar Operating temperature -10 … +100 °C

Data sheet

Spare parts & repair

Pressure differential indicators for filters in pressure lines

WO-D01

Pressure differential indicators for filters in pressure lines

WO-D01

Max. operating pressure 450 bar Operating temperature -30 … +100 °C

Data sheet

Spare parts & repair

Classification according to the Pressure Equipment Directive

These inline filters for hydraulic applications are pressure holding equipment according to article 1, section 2.1.4 of the Pressure Equipment Directive 97/23/EC (PED). However, on the basis of the exception in article 1, section 3.6 of the PEG, hydraulic filters are exempt from the PED if they are not classified higher than category I (guideline 1/19).

For the classification, fluids from the chapter “Compatibility with permitted hydraulic fluids” have been taken into consideration.

They do not receive a CE mark.

Use in potentially explosive areas according to directive 94/9/EC (ATEX)

These inline filters are no equipment or components in the sense of directive 94/9/EC and are not provided with a CE mark. It has been proven with the ignition risk analysis that these inline filters do not have own ignition sources acc. to DIN EN 13463-1:2009.

According to DIN EN 60079-11:2012, the electronic maintenance indicators with one switching point:

WE-1SP-M12x1 and WE-1SP-EN175301-803

are simple, electronic operating equipment not having an own voltage source. This simple, electronic operating equipment may - according to DIN EN 60079-14:2012 - in intrinsically safe electric circuits (Ex ib) be used in systems without marking and certification.

The inline filters and the electronic maintenance indicators described here can be used for the following potentially explosive areas:

	Zone suitability
Gas	1	2
Dust	21	22

Possible circuit according to DIN EN 60079-14

Warning!

Explosion hazard due to high temperature! The temperature depends on the temperature of the medium in the hydraulic circuit and must not exceed the value specified here. Measures are to be taken so that in the potentially explosive area, the max. admissible ignition temperature is not exceeded. When using the filters in potentially explosive areas, appropriate equipotential bonding has to be ensured. The filter is preferably to be earthed via the mounting screws. It has to be noted in this connection that paintings and oxidic protective layers are not electrically conductive. Maintenance only by specialists, instruction by the machine end-user acc. to DIRECTIVE 1999/92/EC appendix II, section 1.1. During filter element exchanges, the packaging material is to be removed from the replacement element outside the potentially explosive area. Functional and safety warranty only applicable when using genuine Rexroth spare parts.

HENGST OF NORTH AMERICA1007310BR928033029

Notice:

350LE(N)

general

Important information on hydraulic fluids!

hydraulic

350LEN0040-H3XL

350LEN0063-H3XL

350LEN0100-H3XL

350LE0130-H3XL

350LE0150-H3XL

350LEN0160-H3XL

350LEN0250-H3XL

350LEN0400-H3XL

350LEN0630-H3XL

350LEN1000-H3XL

350LEN0040-H10XL

350LEN0063-H10XL

50LEN0100-H10XL

350LE0130-H10XL

350LE0150-H10XL

350LEN0160-H10XL

350LEN0250-H10XL

350LEN0400-H10XL

350LEN0630-H10XL

350LEN1000-H10XL

350LE(N)

350LE(N)

Installation

Commissioning

Notice:

Maintenance

Notice:

Warning:

Notice:

Notices:

Classification according to the Pressure Equipment Directive

Use in potentially explosive areas according to directive 94/9/EC (ATEX)

Possible circuit according to DIN EN 60079-14

Warning!

HENGST OF NORTH AMERICA
1007310B
R928033029