SUN HYDRAULICS
X4I

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics X4I (Material Number: X4I) is a line mount interface designed with a banjo bolt configuration, featuring a through port 2 with an additional gauge port. The installation torque for the banjo bolt ranges from 53 lb. ft. to 58 lb. ft. (70 Nm to 77 Nm), with a hex size of .94 inches. This model accommodates open cavities identified as T11A and supports port sizes of 3/8 BSPP. Constructed using 6061T651 aluminum, this material is chosen for its relative strength, cost-effectiveness, machinability, availability in various forms, and excellent corrosion resistance. It is important to note that this manifold is not anodized due to several considerations such as cost, logistics, consistency issues, and potential impacts on fatigue life due to the brittle nature of anodized surfaces under pressure. This product is suitable for applications where manifold fatigue life and corrosion resistance are critical factors while maintaining compatibility with high flow valves through standard line mount manifolds. Users should consider the maximum system pressure when integrating this manifold into their systems; it is rated for pressures up to 3000 psi (210 bar) due to its aluminum construction, regardless of the specified port type or size.