You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

SUN HYDRAULICS
RVEDWBN


$182.10 USD

Tags:

  • SUN HYDRAULICS
  • Material:RVEDWBN
  • Model:RVED-WBN
  • Summary:Cartridge

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEDWBN (RVEDWBN) is a ventable, pilot-operated, balanced piston relief cartridge with an external drain. It functions as a normally closed pressure-regulating valve that opens to the tank port 2 when the inlet port 1 pressure reaches the valve setting, thereby throttling flow to regulate pressure. These valves feature a vent port 3 for remote control and a drain port 4 to ensure insensitivity to back pressure. They are known for their accuracy, low-pressure rise versus flow, smooth and quiet operation, and moderate response speed. The RVEDWBN can handle maximum pressures at port 2 and is suitable for cross-port relief circuits; however, it is not recommended for load-holding applications due to spool leakage considerations. The main stage orifice is safeguarded by a 150-micron stainless steel screen. The valve's pressure setting can be directly influenced by the pressure at port 4 in a 1:1 ratio, with an upper limit of 5000 psi (350 bar). It incorporates Sun's floating style construction to reduce risks of internal part binding due to installation torque or machining variations. This model has a capacity of up to 30 gpm (120 L/min) and operates at maximum pressures of up to 5000 psi (350 bar). The factory settings are established at 4 gpm (15 L/min), with control pilot flow ranging from 10-15 in\u00b3/min (0.16-0.25 L/min). The typical response time is around 10 ms. Adjustment settings can be modified using the internal hex screw or locknut provided, with specific torque requirements for installation and adjustment processes. The RVEDWBN model weighs approximately .70 lb (.30 kg) and supports EPDM seals suitable for phosphate ester fluids while being sensitive to petroleum-based substances.

Ventable, pilot-operated, balanced piston relief cartridges with external drain are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves and a drain (port 4) that makes them insensitive to back pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

  • Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
  • Main stage orifice is protected by a 150 micron stainless steel screen.
  • Not suitable for use in load holding applications due to spool leakage.
  • Pressure at port 4 is directly additive to the valve setting at a 1:1 ratio and should not exceed 5000 psi (350 bar).
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

CavityT-22A
Series2
Capacity30 gpm120 L/min.
Factory Pressure Settings Established at4 gpm15 L/min.
Maximum Operating Pressure5000 psi350 bar
Control Pilot Flow10 - 15 in³/min.0,16 - 0,25 L/min.
Response Time - Typical10 ms10 ms
Maximum Valve Leakage at 110 SUS (24 cSt)3 in³/min.@1000 psi50 cc/min.@70 bar
Adjustment - Number of Clockwise Turns to Increase Setting55
Valve Hex Size1 1/8 in.28,6 mm
Valve Installation Torque45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size5/32 in.4 mm
Locknut Hex Size9/16 in.15 mm
Locknut Torque80 - 90 lbf in.9 - 10 Nm
Model Weight.70 lb0,30 kg
Seal kit - CartridgeViton: 990-022-006

Show FAQ

Additional Resources