SUN HYDRAULICS
RVEBLAV

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEBLAV (Material Number: RVEBLAV) is a three-port, normally closed modulating element with relief capabilities. This versatile hydraulic component serves dual functions when paired with an external orifice. Primarily, it acts as a bypass compensator, regulating priority flow into a circuit as determined by the external orifice, while any excess input flow is redirected to the tank via port 2. Additionally, if the pressure at inlet port 1 exceeds the set valve threshold, it functions as a standard relief valve. The compensating pressure for this device across all ranges is 120 psi (8 bar). Performance curves of the RVEBLAV illustrate that its capacity and functionality are dictated by the bypass flow rather than control flow. The RVEBLAV features a T-2A cavity and belongs to Series 2, with a capacity of 20 gpm (80 L/min). It operates under a maximum pressure of 5000 psi (350 bar) and has a typical response time of 10 ms. The valve's leakage rate at 110 SUS (24 cSt) is minimal, recorded at 3 in\u00b3/min (50 cc/min) under conditions of 1000 psi (70 bar). Adjustment can be fine-tuned using either W or Y controls through its full range unless specified for a special setting. The valve installation requires torque between 45\u201350 lbf ft (61\u201368 Nm), while adjustment screw internal hex size is ^5\u204432 in. and locknut hex size is ^9\u204416 in., with locknut torque set between 80\u201390 lbf in. The model weighs approximately .70 lb (.30 kg) and utilizes Viton seal kits for optimal performance and durability.