SUN HYDRAULICS
RVEALAE
$382.20 USD
Tags:
- SUN HYDRAULICS
- Material:RVEALAE
- Model:RVEA-LAE
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RVEALAE (RVEALAE) is a ventable, pilot-operated, balanced piston relief cartridge designed to regulate pressure efficiently. This normally closed pressure-regulating valve begins to open to the tank port when the inlet port pressure reaches the valve setting, throttling flow to maintain desired pressure levels. It features a vent port that allows remote control via other pilot or 2-way valves, offering precision and low-pressure rise against flow. The valve is smooth, quiet, and moderately fast in operation. Notably, it can accept maximum pressure at port 2 and is suitable for cross-port relief circuits; however, users should be aware of potential spool leakage in such applications. The main stage orifice is protected by a robust 150-micron stainless steel screen. This model is not ideal for load-holding applications due to possible spool leakage. Any backpressure on the tank port directly adds to the valve setting at a 1:1 ratio. The cartridge's EPDM seals are specifically intended for systems utilizing phosphate ester fluids and may be damaged by petroleum-based substances. The Sun floating style construction minimizes internal part binding due to installation torque or machining variations. Key specifications include a cavity T-2A series with a capacity of 30 gpm (120 L/min), maximum operating pressure of 5000 psi (350 bar), and control pilot flow between 10 - 15 in\u00b3/min (0.16 - 0.25 L/min). The typical response time is around 10 ms, with maximum valve leakage at specified conditions being approximately 3 in\u00b3/min (50 cc/min). Adjustment involves up to five clockwise turns, with specific torque requirements for installation and locknut adjustments ensuring secure setup and operation stability.
The Sun Hydraulics RVEALAE (RVEALAE) is a ventable, pilot-operated, balanced piston relief cartridge designed to regulate pressure efficiently. This normally closed pressure-regulating valve begins to open to the tank port when the inlet port pressure reaches the valve setting, throttling flow to maintain desired pressure levels. It features a vent port that allows remote control via other pilot or 2-way valves, offering precision and low-pressure rise against flow. The valve is smooth, quiet, and moderately fast in operation. Notably, it can accept maximum pressure at port 2 and is suitable for cross-port relief circuits; however, users should be aware of potential spool leakage in such applications. The main stage orifice is protected by a robust 150-micron stainless steel screen. This model is not ideal for load-holding applications due to possible spool leakage. Any backpressure on the tank port directly adds to the valve setting at a 1:1 ratio. The cartridge's EPDM seals are specifically intended for systems utilizing phosphate ester fluids and may be damaged by petroleum-based substances. The Sun floating style construction minimizes internal part binding due to installation torque or machining variations. Key specifications include a cavity T-2A series with a capacity of 30 gpm (120 L/min), maximum operating pressure of 5000 psi (350 bar), and control pilot flow between 10 - 15 in\u00b3/min (0.16 - 0.25 L/min). The typical response time is around 10 ms, with maximum valve leakage at specified conditions being approximately 3 in\u00b3/min (50 cc/min). Adjustment involves up to five clockwise turns, with specific torque requirements for installation and locknut adjustments ensuring secure setup and operation stability.
Ventable, pilot-operated, balanced piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. They provide a vent port (port 3) that connects between the main piston and pilot stage to provide for remote control by other pilot or 2-way valves. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.
- A remote pilot relief on port 3 (vent) will control the valve below its own setting.
- Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Not suitable for use in load holding applications due to spool leakage.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-2A |
| Series | 2 |
| Capacity | 30 gpm120 L/min. |
| Factory Pressure Settings Established at | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Control Pilot Flow | 10 - 15 in³/min.0,16 - 0,25 L/min. |
| Response Time - Typical | 10 ms10 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 3 in³/min.@1000 psi50 cc/min.@70 bar |
| Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
| Valve Hex Size | 1 1/8 in.28,6 mm |
| Valve Installation Torque | 45 - 50 lbf ft61 - 68 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .70 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-202-006 |
Show FAQ
Additional Resources
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
- Cavity Information (S-171) and Tooling
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.