SUN HYDRAULICS
BODY
KFN

$166.90 USD

Tags:

SUN HYDRAULICS
Material:KFN
Summary:Manifold

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics KFN (Material Number: KFN) is a line mount hydraulic manifold designed for efficient fluid control in various hydraulic systems. This model features a ninety-degree body type with an integrated gauge port, allowing for easy monitoring of system pressure. The manifold is equipped with two mounting holes, each with a diameter of 0.42 inches (10.7 mm), and these holes are designed to pass through the entire body for secure installation. The KFN model includes one open cavity and utilizes the T19A cavity specification, providing compatibility with specific cartridge valves. The manifold's port size is SAE 20, which facilitates high flow rates suitable for demanding hydraulic applications. Constructed from 6061-T651 aluminum, this material choice offers excellent corrosion resistance and durability under typical operating conditions while maintaining a balance between strength and cost-effectiveness. Notably, the manifold is not anodized due to considerations related to cost, logistics, and potential impacts on fatigue life. Designed to accommodate high flow valves, the Sun Hydraulics KFN manifold is ideal for use in systems where reliable fluid management is critical. It can be integrated into custom hydraulic solutions or used as part of standard setups requiring efficient line mounting capabilities. Users should ensure that system pressures do not exceed 3000 psi (210 bar) as aluminum manifolds are not rated beyond this threshold regardless of port size specifications.

Description

Body Type	Line mountLine mount
Interface	NoneNone
Body Features	Ninety degree with gauge portNinety degree with gauge port
Mounting Hole Diameter	.42 in.10,7 mm
Mounting Hole Depth	ThroughThrough
Mounting Hole Quantity	22
Open Cavities	11
Cavity	T-19A
Port Size	SAE 20SAE 20

Show FAQ

How big is a drop of hydraulic oil?	There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Why does Sun use 6061 aluminum?	6061-T651 is relatively strong, relatively inexpensive, difficult to machine, readily available in all shapes and sizes and very corrosion resistant. 2024 is stronger and machines beautifully, but is expensive and falls to pieces in a corrosive environment.
Why doesn't Sun anodize their aluminum bodies?	Reasons to anodize: To increase corrosion resistance. Sun uses 6061-T651 aluminum. It is one of the most corrosion resistant aluminum alloys there is. Whether or not anodizing improves the corrosion resistance of 6061 aluminum is debatable. We have yet to have a manifold returned because of corrosion. Appearance (color). The 2 colors that would appeal to Sun would be blue or black. Unfortunately these are the colors that are hardest to do consistently. To provide a hard wear surface. Sun does not make parts-in-body valves. The manifold is just plumbing. We don't need a wear surface. Because everyone else does it. Bad reason. Reasons to not anodize: Cost. It's another process. Logistics. When you make tens of thousands of manifolds a month and you anodize hundreds, it's a problem. Consistency. See above. Stamping. After a body is anodized you cannot do any more stamping without making a mess.Inspection. Have you ever tried to look for burrs in a black anodized body? It's the old blackboard factory at night scenario. Torque. You will experience an increase in breakaway torque when removing items from an anodized manifold. Fatigue life. This is the best reason to not anodize. Fatigue failure is a very complex phenomenon. What it takes to initiate a crack is difficult to predict. What it takes to propagate a crack is readily defined. Anodizing produces a very thin, very hard, and very brittle surface on aluminum. The first time you pressurize an anodized aluminum manifold you have initiated fatigue cracks. Whether or not the stress is enough to propagate the cracks is a matter of pressure and manifold geometry. Anodizing an aluminum manifold grossly reduces the fatigue life by anywhere from 20% to 50%.

Additional Resources

Notes:

Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.

SUN HYDRAULICSBODYKFN

Additional Resources

SUN HYDRAULICS
BODY
KFN