SUN HYDRAULICS
FRCAKAN
$71.00 USD
Tags:
- SUN HYDRAULICS
- Material:FRCAKAN
- Model:FRCA-KAN
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FRCAKAN (Material Number: FRCAKAN) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage input flow by prioritizing it at port 3 while bypassing any excess through port 2. This allows for efficient use of the bypass flow in secondary circuits. The valve maintains relatively constant priority flow regardless of input variations and ensures that bypass flow is only available once priority requirements are satisfied. Notably, the pressure at the bypass port can exceed that at the priority port. The sharp-edged orifice design minimizes variations due to viscosity changes, and an adjustable control option allows for up to a 25% variation from the factory preset flow with three turns of an adjust screw. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive torque or machining variations. It fits a T-11A cavity, has a series 1 capacity of 6 gpm (23 L/min), and can handle a maximum operating pressure of 5000 psi (350 bar) with an input flow up to 15 gpm (60 L/min). Installation requires specific torque settings: valve hex size is 7/8 in (22.2 mm) with torque between 30-35 lbf ft (41-47 Nm), adjustment screw internal hex size is 5/32 in (4 mm), locknut hex size is 9/16 in (15 mm), and locknut torque ranges from 80-90 lbf in (9-10 Nm). The model weighs .30 lb (0.15 kg) and uses a Viton seal kit cartridge identified as part number 990011006.
The Sun Hydraulics FRCAKAN (Material Number: FRCAKAN) is a bypass-restrictive, fixed-orifice, priority flow control valve designed to manage input flow by prioritizing it at port 3 while bypassing any excess through port 2. This allows for efficient use of the bypass flow in secondary circuits. The valve maintains relatively constant priority flow regardless of input variations and ensures that bypass flow is only available once priority requirements are satisfied. Notably, the pressure at the bypass port can exceed that at the priority port. The sharp-edged orifice design minimizes variations due to viscosity changes, and an adjustable control option allows for up to a 25% variation from the factory preset flow with three turns of an adjust screw. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive torque or machining variations. It fits a T-11A cavity, has a series 1 capacity of 6 gpm (23 L/min), and can handle a maximum operating pressure of 5000 psi (350 bar) with an input flow up to 15 gpm (60 L/min). Installation requires specific torque settings: valve hex size is 7/8 in (22.2 mm) with torque between 30-35 lbf ft (41-47 Nm), adjustment screw internal hex size is 5/32 in (4 mm), locknut hex size is 9/16 in (15 mm), and locknut torque ranges from 80-90 lbf in (9-10 Nm). The model weighs .30 lb (0.15 kg) and uses a Viton seal kit cartridge identified as part number 990011006.
Bypass/restrictive, fixed-orifice, priority flow controls take an input flow at port 1 and use it to satisfy the priority flow at port 3. If the input flow exceeds the priority flow requirement, the excess is bypassed out port 2. The bypass flow may be used in a secondary circuit.
- Customer must specify a flow rating. Factory set flow ratings are within +/- 10% of the requested setting.
- Both priority and bypass flow are usable up to the system operating pressure.
- Priority remains relatively constant regardless of variation in input flow.
- Bypass flow is not available until priority flow requirements are satisfied.
- Pressure at the bypass port (port 2) may exceed pressure at the priority port (port 3).
- The sharp-edged orifice design minimizes flow variations due to viscosity changes.
- A tuneable adjustment control option provides up to +/- 25% variation from the nominal factory pre-set flow. Adjustment is done with +/- 3 turns of the adjust screw. Screw in (CW) to increase flow.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-11A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Input Flow | 15 gpm60 L/min. |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
| Locknut Hex Size | 9/16 in.15 mm |
| Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
| Model Weight | .30 lb0,15 kg |
| Seal kit - Cartridge | Viton: 990-011-006 |
Show FAQ