SUN HYDRAULICS
FPHKXEN724N
$362.10 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKXEN724N
- Model:FPHK-XEN@724N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXEN724N (FPHKXEN724N) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check feature. This advanced hydraulic component operates by energizing the coil, which generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. Designed for high-performance applications, it supports metered flow from port 1 to port 2 and allows reverse free flow from port 2 to port 1. The valve is capable of handling pressures up to 5000 psi and features interchangeable coils compatible with Sun's other full-flow solenoid-operated valves, allowing flexible installation in either direction. The FPHKXEN724N fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve incorporates Sun's floating style construction, minimizing the risk of internal parts binding due to excessive installation torque or machining variations in the cavity or cartridge. For manual operation, several override options are available, including a momentary twist override that requires rotating the manual override clockwise by 90 degrees. The valve has a nominal deadband percentage of input at 25% and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. It also features a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque ranging from 150-160 lbf ft (203-217 Nm). The model weighs approximately 1.50 lb (0.70 kg), increasing to around 2.00 lb when equipped with the coil. Seal kits for both cartridge and coil are available in Viton material for enhanced durability and compatibility with hydraulic fluids.
The Sun Hydraulics FPHKXEN724N (FPHKXEN724N) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check feature. This advanced hydraulic component operates by energizing the coil, which generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. Designed for high-performance applications, it supports metered flow from port 1 to port 2 and allows reverse free flow from port 2 to port 1. The valve is capable of handling pressures up to 5000 psi and features interchangeable coils compatible with Sun's other full-flow solenoid-operated valves, allowing flexible installation in either direction. The FPHKXEN724N fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve incorporates Sun's floating style construction, minimizing the risk of internal parts binding due to excessive installation torque or machining variations in the cavity or cartridge. For manual operation, several override options are available, including a momentary twist override that requires rotating the manual override clockwise by 90 degrees. The valve has a nominal deadband percentage of input at 25% and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. It also features a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque ranging from 150-160 lbf ft (203-217 Nm). The model weighs approximately 1.50 lb (0.70 kg), increasing to around 2.00 lb when equipped with the coil. Seal kits for both cartridge and coil are available in Viton material for enhanced durability and compatibility with hydraulic fluids.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ