SUN HYDRAULICS
FPHKXEN2F24V
$603.70 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKXEN2F24V
- Model:FPHK-XEN@2F24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXEN2F24V (FPHKXEN2F24V) is a pilot-operated, normally closed, electroproportional throttle valve featuring reverse free flow check capabilities. When the coil is energized, it generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This valve supports metered flow from port 1 to port 2 and allows reverse free flow from port 2 to port 1, making it versatile for various hydraulic applications. It operates efficiently under pressures up to 5000 psi and offers a maximum capacity of 60 gpm (240 L/min). The coils used in this valve are interchangeable with other full-flow solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100 to 250 Hz. The cartridge also includes several manual override options, including a momentary-twist override that allows the operator to shift the valve by twisting clockwise by 90 degrees. The valve incorporates Sun's floating style construction to reduce internal part binding due to excessive installation torque or machining variations. It fits into cavity T16A and belongs to Series 3 of Sun Hydraulics' offerings. Additional specifications include a nominal deadband percentage of input at 25%, manual override stroke of .06 inches (1.50 mm), solenoid tube diameter of .75 inches (19 mm), and installation torque requirements ranging from 150 to 160 lbf ft (203 to 217 Nm). The product weighs approximately 1.50 lbs without the coil and increases slightly with it installed. For maintenance or replacement needs, Viton seal kits are available for both cartridge and coil components.
The Sun Hydraulics FPHKXEN2F24V (FPHKXEN2F24V) is a pilot-operated, normally closed, electroproportional throttle valve featuring reverse free flow check capabilities. When the coil is energized, it generates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This valve supports metered flow from port 1 to port 2 and allows reverse free flow from port 2 to port 1, making it versatile for various hydraulic applications. It operates efficiently under pressures up to 5000 psi and offers a maximum capacity of 60 gpm (240 L/min). The coils used in this valve are interchangeable with other full-flow solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100 to 250 Hz. The cartridge also includes several manual override options, including a momentary-twist override that allows the operator to shift the valve by twisting clockwise by 90 degrees. The valve incorporates Sun's floating style construction to reduce internal part binding due to excessive installation torque or machining variations. It fits into cavity T16A and belongs to Series 3 of Sun Hydraulics' offerings. Additional specifications include a nominal deadband percentage of input at 25%, manual override stroke of .06 inches (1.50 mm), solenoid tube diameter of .75 inches (19 mm), and installation torque requirements ranging from 150 to 160 lbf ft (203 to 217 Nm). The product weighs approximately 1.50 lbs without the coil and increases slightly with it installed. For maintenance or replacement needs, Viton seal kits are available for both cartridge and coil components.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ