SUN HYDRAULICS
FPHKXCV912N
$358.30 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKXCV912N
- Model:FPHK-XCV@912N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXCV912N (FPHKXCV912N) is a pilot-operated, normally closed electroproportional throttle valve that includes a reverse free flow check. When the coil is energized, it creates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This valve allows metered flow from port 1 to port 2 and permits reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and is compatible with interchangeable coils from Sun's other solenoid-operated valves, which can be mounted in either direction on the tube. The FPHKXCV912N model features several manual override options, including a momentary-twist option that allows manual shifting by twisting the override clockwise 90 degrees. For optimal performance, it's recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations. Additional specifications include a capacity of 60 gpm (240 L/min), a nominal deadband as a percentage of input at 25%, and a maximum valve leakage at 110 SUS (24 cSt) of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The valve has a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque between 150-160 lbf-ft (203-217 Nm). It weighs approximately 1.50 lbs without the coil and increases to around 2.00 lbs with the coil installed. The seal kit for this cartridge is available in Viton material under part number 990016006, while the seal and nut kit for the coil also uses Viton under part number 990770006.
The Sun Hydraulics FPHKXCV912N (FPHKXCV912N) is a pilot-operated, normally closed electroproportional throttle valve that includes a reverse free flow check. When the coil is energized, it creates an opening force on the pilot stage, venting the main stage poppet to open proportionally. This valve allows metered flow from port 1 to port 2 and permits reverse free flow from port 2 to port 1. It operates efficiently under pressures up to 5000 psi and is compatible with interchangeable coils from Sun's other solenoid-operated valves, which can be mounted in either direction on the tube. The FPHKXCV912N model features several manual override options, including a momentary-twist option that allows manual shifting by twisting the override clockwise 90 degrees. For optimal performance, it's recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. The valve incorporates Sun's floating style construction to minimize internal part binding due to excessive installation torque or machining variations. Additional specifications include a capacity of 60 gpm (240 L/min), a nominal deadband as a percentage of input at 25%, and a maximum valve leakage at 110 SUS (24 cSt) of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The valve has a solenoid tube diameter of .75 inches (19 mm) and requires an installation torque between 150-160 lbf-ft (203-217 Nm). It weighs approximately 1.50 lbs without the coil and increases to around 2.00 lbs with the coil installed. The seal kit for this cartridge is available in Viton material under part number 990016006, while the seal and nut kit for the coil also uses Viton under part number 990770006.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ