SUN HYDRAULICS
FPHKXCN624
$344.40 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKXCN624
- Model:FPHK-XCN@624
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXCN624 (FPHKXCN624) is a pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This valve is designed to operate at pressures up to 5000 psi, making it suitable for demanding applications that require precise flow control. When the coil is energized, it creates an opening force on the pilot stage, which in turn vents the main stage poppet to open proportionally. The metered flow occurs from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. This model features interchangeable coils compatible with other full-flow solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For enhanced performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. Manual override options are available, including a momentary-twist override allowing manual shifting by twisting clockwise by 90 degrees. The FPHKXCN624 incorporates Sun's floating style construction to minimize internal binding due to excessive installation torque or cavity/cartridge machining variations. It fits into a T16A cavity and belongs to series 3 with a capacity of up to 60 gpm (240 L/min). The valve has a nominal deadband of 25% as a percentage of input and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. The solenoid tube diameter is .75 inches (19 mm), and it has a hex size of 1\u00bc inches (31.8 mm). Installation torque ranges between 150-160 lbf-ft (203-217 Nm), while the model weight without coil stands at approximately 1.50 lb (0.70 kg) and increases slightly with the coil attached. Seal kits are available in Viton material for both cartridge and coil components.
The Sun Hydraulics FPHKXCN624 (FPHKXCN624) is a pilot-operated, normally closed, electroproportional throttle valve equipped with a reverse free flow check. This valve is designed to operate at pressures up to 5000 psi, making it suitable for demanding applications that require precise flow control. When the coil is energized, it creates an opening force on the pilot stage, which in turn vents the main stage poppet to open proportionally. The metered flow occurs from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. This model features interchangeable coils compatible with other full-flow solenoid-operated valves from Sun Hydraulics and can be mounted in either direction on the tube. For enhanced performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100-250 Hz. Manual override options are available, including a momentary-twist override allowing manual shifting by twisting clockwise by 90 degrees. The FPHKXCN624 incorporates Sun's floating style construction to minimize internal binding due to excessive installation torque or cavity/cartridge machining variations. It fits into a T16A cavity and belongs to series 3 with a capacity of up to 60 gpm (240 L/min). The valve has a nominal deadband of 25% as a percentage of input and requires a manual override force of approximately 5 lbs/1000 psi at Port 1. The solenoid tube diameter is .75 inches (19 mm), and it has a hex size of 1\u00bc inches (31.8 mm). Installation torque ranges between 150-160 lbf-ft (203-217 Nm), while the model weight without coil stands at approximately 1.50 lb (0.70 kg) and increases slightly with the coil attached. Seal kits are available in Viton material for both cartridge and coil components.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ