SUN HYDRAULICS
FPHKXCN2C24V
$641.60 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKXCN2C24V
- Model:FPHK-XCN@2C24V
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKXCN2C24V (FPHKXCN2C24V) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check. This valve is designed to control fluid flow by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet open proportionally. It allows for metered flow from port 1 to port 2 and provides reverse free flow from port 2 to port 1. The valve can operate under pressures up to 5000 psi and features interchangeable coils compatible with other Sun full-flow solenoid-operated valves, allowing for versatile mounting options on the tube in either direction. For enhanced performance, it is recommended to use an amplifier with current sensing and adjustable dither frequency between 100-250 Hz. The momentary twist override option (Option E) enables manual operation by twisting the override clockwise by 90 degrees. Depending on circuit requirements, a reverse free flow check bypassing the compensator may be necessary when using this valve with an external compensator. This cartridge incorporates Sun's floating style construction, minimizing potential internal binding due to excessive installation torque or machining variations in cavity/cartridge configurations. It fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at standard conditions is minimal at about 10 drops/minute at 5000 psi. The valve features various manual override choices and requires approximately 5 lbs of force per 1000 psi at Port 1 for manual operation. Additional specifications include a solenoid tube diameter of .75 inches (19 mm), a hex size of 1\u00bc inches (31.8 mm), and an installation torque range of 150-160 lbf-ft (203-217 Nm). The model weight is approximately 1.50 lb without coil and increases slightly with the coil attached. Seal kits are available in Viton material for both cartridge and coil components.
The Sun Hydraulics FPHKXCN2C24V (FPHKXCN2C24V) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check. This valve is designed to control fluid flow by energizing the coil, which generates an opening force on the pilot stage to vent the main stage poppet open proportionally. It allows for metered flow from port 1 to port 2 and provides reverse free flow from port 2 to port 1. The valve can operate under pressures up to 5000 psi and features interchangeable coils compatible with other Sun full-flow solenoid-operated valves, allowing for versatile mounting options on the tube in either direction. For enhanced performance, it is recommended to use an amplifier with current sensing and adjustable dither frequency between 100-250 Hz. The momentary twist override option (Option E) enables manual operation by twisting the override clockwise by 90 degrees. Depending on circuit requirements, a reverse free flow check bypassing the compensator may be necessary when using this valve with an external compensator. This cartridge incorporates Sun's floating style construction, minimizing potential internal binding due to excessive installation torque or machining variations in cavity/cartridge configurations. It fits into a T16A cavity and belongs to Series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at standard conditions is minimal at about 10 drops/minute at 5000 psi. The valve features various manual override choices and requires approximately 5 lbs of force per 1000 psi at Port 1 for manual operation. Additional specifications include a solenoid tube diameter of .75 inches (19 mm), a hex size of 1\u00bc inches (31.8 mm), and an installation torque range of 150-160 lbf-ft (203-217 Nm). The model weight is approximately 1.50 lb without coil and increases slightly with the coil attached. Seal kits are available in Viton material for both cartridge and coil components.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ