SUN HYDRAULICS
FPHKMEN4A24A
$641.70 USD
Tags:
- SUN HYDRAULICS
- Material:FPHKMEN4A24A
- Model:FPHK-MEN@4A24A
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics FPHKMEN4A24A (FPHKMEN4A24A) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check feature. This valve is designed to provide metered flow from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. It operates effectively under pressures up to 5000 psi and is compatible with interchangeable coils from Sun's solenoid-operated valves, which can be mounted in either direction on the tube. The valve offers various manual override options, including a momentary-twist override that allows the operator to shift the valve by twisting the manual override clockwise by 90 degrees. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100 and 250 Hz. The FPHKMEN4A24A incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or machining variations of the cavity/cartridge. It fits into a T16A cavity and belongs to series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at 110 SUS (24 cSt) is limited to 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) at Port 1 and features a stroke length of .06 inches (1.50 mm). The solenoid tube diameter measures .75 inches (19 mm), and the hex size for installation is set at 1-1/4 inches (31.8 mm), with an installation torque requirement of between 150-160 lbf-ft (203-217 Nm). Weighing in at approximately 2 lbs when equipped with a coil, this model also offers Viton seal kits for both cartridge and coil applications for enhanced durability and performance reliability.
The Sun Hydraulics FPHKMEN4A24A (FPHKMEN4A24A) is a pilot-operated, normally closed, electroproportional throttle valve with a reverse free flow check feature. This valve is designed to provide metered flow from port 1 to port 2, while allowing reverse free flow from port 2 to port 1. It operates effectively under pressures up to 5000 psi and is compatible with interchangeable coils from Sun's solenoid-operated valves, which can be mounted in either direction on the tube. The valve offers various manual override options, including a momentary-twist override that allows the operator to shift the valve by twisting the manual override clockwise by 90 degrees. For optimal performance, it is recommended to use an amplifier with current sensing and adjustable dither between 100 and 250 Hz. The FPHKMEN4A24A incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or machining variations of the cavity/cartridge. It fits into a T16A cavity and belongs to series 3 with a capacity of up to 60 gpm (240 L/min). The maximum valve leakage at 110 SUS (24 cSt) is limited to 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). The manual override requires a force of approximately 5 lbs/1000 psi (33 N/100 bar) at Port 1 and features a stroke length of .06 inches (1.50 mm). The solenoid tube diameter measures .75 inches (19 mm), and the hex size for installation is set at 1-1/4 inches (31.8 mm), with an installation torque requirement of between 150-160 lbf-ft (203-217 Nm). Weighing in at approximately 2 lbs when equipped with a coil, this model also offers Viton seal kits for both cartridge and coil applications for enhanced durability and performance reliability.
This valve is a pilot operated, normally closed, electro-proportional throttle with reverse free flow check. Energizing the coil generates an opening force on the pilot stage which vents the main stage poppet to open proportionally. Metered flow is from port 1 to port 2 with reverse free flow from port 2 to port 1.
- Capable of operating with pressures up to 5000 psi.
- Coils are interchangeable with Sun's other full flow, solenoid-operated valves and can be mounted on the tube in either direction.
- This cartridge has several manual override choices, including no manual override. See Option Configuration.
- For optimum performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
- The momentary/twist override option "E" allows the operator to shift the valve by twisting the manual override clockwise 90 degrees.
- Depending on circuit requirements, a reverse free flow check bypassing the compensator may be needed when using the FPHK with an external compensator.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-16A |
| Series | 3 |
| Capacity | 60 gpm240 L/min. |
| Recommended dither frequency | 100 Hz100 Hz |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Deadband, nominal (as a percentage of input) | 25%25% |
| Manual Override Stroke | .06 in.1,50 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 1 1/4 in.31,8 mm |
| Valve Installation Torque | 150 - 160 lbf ft203 - 217 Nm |
| Model Weight | 1.50 lb0,70 kg |
| Model Weight (with coil) | 2.00 lb2.00 lb |
| Seal kit - Cartridge | Viton: 990-016-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ