SUN HYDRAULICS
DTCAZCV924
$792.60 USD
Tags:
- SUN HYDRAULICS
- Material:DTCAZCV924
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DTCAZCV924 (DTCAZCV924) is a solenoid-operated, 2-way, 2-position cartridge valve designed for direct-acting, poppet-style directional control. This valve is engineered to minimize leakage by using poppet-style construction, which prevents fluid passage when pressure changes suddenly due to fluid compressibility. The DTCAZCV924 includes a position switch that confirms the valve's non-energized position and is CE approved. It requires a coil for operation and is supplied as a sealed unit, not field serviceable. The solenoid tube assembly can withstand pressures up to 5000 psi (350 bar) and features a fatigue rating suitable for load-holding applications where the valve springs closed upon power failure. This model incorporates Sun's floating style construction to reduce internal part binding from excessive torque or machining variations. It operates with no minimum hydraulic pressure requirement and uses a wet armature design, exposing the armature to working fluid heat generated by the coil\u2014a consideration for long-term coil energization with certain fluids like water-glycol mixtures. The DTCAZCV924 has a high-efficiency solenoid design that provides significant spool actuating force per watt of energy used. Installation requires specific tools such as a crow's foot wrench due to the position switch configuration. The valve supports switching frequencies of up to 15,000 cycles per hour with maximum leakage of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). It fits into cavity T-13A and features a capacity of 6 gpm (23 L/min). Additionally, models with D or L controls include manual override detents designed for temporary actuation with an expected mechanical life of about 7,000 cycles.
The Sun Hydraulics DTCAZCV924 (DTCAZCV924) is a solenoid-operated, 2-way, 2-position cartridge valve designed for direct-acting, poppet-style directional control. This valve is engineered to minimize leakage by using poppet-style construction, which prevents fluid passage when pressure changes suddenly due to fluid compressibility. The DTCAZCV924 includes a position switch that confirms the valve's non-energized position and is CE approved. It requires a coil for operation and is supplied as a sealed unit, not field serviceable. The solenoid tube assembly can withstand pressures up to 5000 psi (350 bar) and features a fatigue rating suitable for load-holding applications where the valve springs closed upon power failure. This model incorporates Sun's floating style construction to reduce internal part binding from excessive torque or machining variations. It operates with no minimum hydraulic pressure requirement and uses a wet armature design, exposing the armature to working fluid heat generated by the coil\u2014a consideration for long-term coil energization with certain fluids like water-glycol mixtures. The DTCAZCV924 has a high-efficiency solenoid design that provides significant spool actuating force per watt of energy used. Installation requires specific tools such as a crow's foot wrench due to the position switch configuration. The valve supports switching frequencies of up to 15,000 cycles per hour with maximum leakage of 10 drops/min at 5000 psi (0.7 cc/min at 350 bar). It fits into cavity T-13A and features a capacity of 6 gpm (23 L/min). Additionally, models with D or L controls include manual override detents designed for temporary actuation with an expected mechanical life of about 7,000 cycles.
This solenoid-operated 2-way, 2-position cartridge is a direct-acting, poppet-style directional valve. Due to the poppet-style construction, this valve has extremely low leakage.
Many poppet style directional valves pass a small amount of fluid when the pressure across them changes suddenly. This is due to the compressibility of the fluid. This valve has been designed to prevent this from happening.
The position switch provides confirmation that the valve is in the non-energized position.
- A coil must be ordered with this cartridge. This cartridge is supplied as a sealed, factory set unit and is not field serviceable. If the assembly requires changes or service it needs to be returned to the factory. Any tampering will violate the product warranty.
- Position switch is CE approved.
- When torquing this cartridge into its cavity, a crow's foot wrench or similar will be required since the position switch precludes the use of a deep socket wrench.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This valve is suitable for load holding applications. In the event of power failure, the valve will spring closed.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-13A |
| Series | 1 |
| Capacity | 6 gpm23 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 drops/min.@5000 psi0,7 cc/min.@350 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .50 lb0,25 kg |
| Seal kit - Cartridge | Viton: 990-413-006 |
Show FAQ