SUN HYDRAULICS
DNDYLXV824
$317.10 USD
Tags:
- SUN HYDRAULICS
- Material:DNDYLXV824
- Model:DNDY-LXV@824
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDYLXV824 (DNDYLXV824) is a solenoid-operated, 6-way, 2-position cartridge valve designed for direct-acting applications. This balanced spool valve is typically used to switch between two separate circuits, with the de-energized state connecting P and T to one circuit and the energized state connecting them to another. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and operates without requiring a minimum hydraulic pressure. The valve offers multiple manual override options, though these are not compatible with weatherized coils. The wet armature design allows the working fluid to surround the armature, which can be affected by coil-generated heat over extended periods, particularly in water-glycol mixtures. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted in either direction, with connector options rated up to IP69K for environmental protection. This cartridge valve incorporates Sun\u2019s floating style construction to minimize internal part binding due to installation torque or machining variations. It fits into a T-61A cavity with a capacity of 5 gpm (20 L/min) and has a maximum operating pressure of 5000 psi (350 bar). Typical response time is around 50 ms, with maximum leakage at 110 SUS (24 cSt) being 5 in\u00b3/min at 3000 psi (80 cc/min at 210 bar). The switching frequency can reach up to 15,000 cycles per hour. Manual override requires approximately 5 lbs force per 1000 psi and has a stroke of .10 inches (2.5 mm). The valve features a hex size of .78 inches (22.2 mm) and should be installed with a torque of 30-35 lbf ft (41-47 Nm). It weighs approximately .60 lb (.30 kg), with Viton seal kits available for both the cartridge and coil components.
The Sun Hydraulics DNDYLXV824 (DNDYLXV824) is a solenoid-operated, 6-way, 2-position cartridge valve designed for direct-acting applications. This balanced spool valve is typically used to switch between two separate circuits, with the de-energized state connecting P and T to one circuit and the energized state connecting them to another. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and operates without requiring a minimum hydraulic pressure. The valve offers multiple manual override options, though these are not compatible with weatherized coils. The wet armature design allows the working fluid to surround the armature, which can be affected by coil-generated heat over extended periods, particularly in water-glycol mixtures. The solenoid's magnetic design enhances efficiency by providing high spool actuating force per watt expended. Coils are interchangeable within Sun's Series 1 solenoid products and can be mounted in either direction, with connector options rated up to IP69K for environmental protection. This cartridge valve incorporates Sun\u2019s floating style construction to minimize internal part binding due to installation torque or machining variations. It fits into a T-61A cavity with a capacity of 5 gpm (20 L/min) and has a maximum operating pressure of 5000 psi (350 bar). Typical response time is around 50 ms, with maximum leakage at 110 SUS (24 cSt) being 5 in\u00b3/min at 3000 psi (80 cc/min at 210 bar). The switching frequency can reach up to 15,000 cycles per hour. Manual override requires approximately 5 lbs force per 1000 psi and has a stroke of .10 inches (2.5 mm). The valve features a hex size of .78 inches (22.2 mm) and should be installed with a torque of 30-35 lbf ft (41-47 Nm). It weighs approximately .60 lb (.30 kg), with Viton seal kits available for both the cartridge and coil components.
This solenoid-operated 6-way, 2-position cartridge is a direct-acting, balanced spool valve. The typical use for this valve is to select between two separate circuits. The de-energized condition connects P and T to the first circuit and when energized connects P and T to the second circuit.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-61A |
| Series | 1 |
| Capacity | 5 gpm20 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 5 in³/min.@3000 psi80 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-461-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ