SUN HYDRAULICS
DNDAXDV236
$227.00 USD
Tags:
- SUN HYDRAULICS
- Material:DNDAXDV236
- Model:DNDA-XDV@236
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAXDV236 (Material Number: DNDAXDV236) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered for high performance, the valve operates efficiently at a maximum pressure of 5000 psi (350 bar) without requiring any minimum hydraulic pressure. The solenoid tube assembly is fatigue-rated for durability under high-pressure conditions. Featuring a wet armature design, the valve's working fluid surrounds the armature, which may impact performance if energized for extended periods due to heat exposure. This model offers various manual override options but note that manual overrides are incompatible with weatherized coils and have a mechanical life expectancy of approximately 7,000 cycles when equipped with the D or L control. The DNDAXDV236 incorporates Sun's floating style construction to minimize internal binding risks caused by excessive installation torque or machining variations. It supports a capacity of up to 10 gpm (40 L/min) and demonstrates a typical response time of 50 ms with minimal leakage at rated conditions. The valve accommodates diverse coil termination and voltage options with interchangeable coils compatible with other Sun Series 1 solenoid products. Connector options provide protection ratings up to IP69K for enhanced environmental resistance. Installation requires specific torque settings between 30 - 35 lbf ft (41 - 47 Nm), while the manual override necessitates a force of 5 lbs/1000 psi at Port 1. The valve is compact, weighing approximately .60 lb (0.30 kg), and features a hex size of .78 in (22.2 mm). The solenoid tube diameter measures .75 in (19 mm). For systems using phosphate ester fluids, EPDM seals are recommended to prevent damage from petroleum-based substances.
The Sun Hydraulics DNDAXDV236 (Material Number: DNDAXDV236) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. Engineered for high performance, the valve operates efficiently at a maximum pressure of 5000 psi (350 bar) without requiring any minimum hydraulic pressure. The solenoid tube assembly is fatigue-rated for durability under high-pressure conditions. Featuring a wet armature design, the valve's working fluid surrounds the armature, which may impact performance if energized for extended periods due to heat exposure. This model offers various manual override options but note that manual overrides are incompatible with weatherized coils and have a mechanical life expectancy of approximately 7,000 cycles when equipped with the D or L control. The DNDAXDV236 incorporates Sun's floating style construction to minimize internal binding risks caused by excessive installation torque or machining variations. It supports a capacity of up to 10 gpm (40 L/min) and demonstrates a typical response time of 50 ms with minimal leakage at rated conditions. The valve accommodates diverse coil termination and voltage options with interchangeable coils compatible with other Sun Series 1 solenoid products. Connector options provide protection ratings up to IP69K for enhanced environmental resistance. Installation requires specific torque settings between 30 - 35 lbf ft (41 - 47 Nm), while the manual override necessitates a force of 5 lbs/1000 psi at Port 1. The valve is compact, weighing approximately .60 lb (0.30 kg), and features a hex size of .78 in (22.2 mm). The solenoid tube diameter measures .75 in (19 mm). For systems using phosphate ester fluids, EPDM seals are recommended to prevent damage from petroleum-based substances.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ