SUN HYDRAULICS
DNDATYN72499
$271.00 USD
Tags:
- SUN HYDRAULICS
- Material:DNDATYN72499
- Model:DNDA-TYN@72499
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATYN72499 (DNDATYN72499) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), ensuring robust service performance. This valve operates without needing minimum hydraulic pressure and offers multiple manual override options, though note that these overrides are incompatible with weatherized coils. The manual override mechanisms have a life expectancy of about 7,000 cycles and require specific force for actuation. The valve supports EPDM seals suitable for phosphate ester fluids but warns against exposure to petroleum-based substances that could damage the seals. The design incorporates a wet armature, allowing the working fluid to surround the armature, which may influence performance if the coil is energized for extended periods due to heat exposure. This is particularly important when using fluids like water-glycol mixtures that can degrade and form varnishes over time. The high-efficiency solenoid design ensures reliable valve shifting with significant spool actuating force per watt expended. This model includes interchangeable coils compatible with other Sun Series 1 solenoid products, offering flexible mounting options and various coil termination and voltage configurations. Coil connectors provide protection ratings up to IP69K for enhanced environmental resistance. The valve's construction minimizes potential binding from excessive installation torque or machining variations. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), this cartridge supports a typical response time of 50 ms and can handle a switching frequency up to 15,000 cycles per hour. Its compact design includes a .75-inch (19 mm) solenoid tube diameter and requires installation torque between 30 - 35 lbf ft (41 - 47 Nm).
The Sun Hydraulics DNDATYN72499 (DNDATYN72499) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a solenoid tube assembly rated for fatigue at 5000 psi (350 bar), ensuring robust service performance. This valve operates without needing minimum hydraulic pressure and offers multiple manual override options, though note that these overrides are incompatible with weatherized coils. The manual override mechanisms have a life expectancy of about 7,000 cycles and require specific force for actuation. The valve supports EPDM seals suitable for phosphate ester fluids but warns against exposure to petroleum-based substances that could damage the seals. The design incorporates a wet armature, allowing the working fluid to surround the armature, which may influence performance if the coil is energized for extended periods due to heat exposure. This is particularly important when using fluids like water-glycol mixtures that can degrade and form varnishes over time. The high-efficiency solenoid design ensures reliable valve shifting with significant spool actuating force per watt expended. This model includes interchangeable coils compatible with other Sun Series 1 solenoid products, offering flexible mounting options and various coil termination and voltage configurations. Coil connectors provide protection ratings up to IP69K for enhanced environmental resistance. The valve's construction minimizes potential binding from excessive installation torque or machining variations. With a capacity of 10 gpm (40 L/min) and maximum operating pressure of 5000 psi (350 bar), this cartridge supports a typical response time of 50 ms and can handle a switching frequency up to 15,000 cycles per hour. Its compact design includes a .75-inch (19 mm) solenoid tube diameter and requires installation torque between 30 - 35 lbf ft (41 - 47 Nm).
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ