SUN HYDRAULICS
DNDATUV814N
$270.30 USD
Tags:
- SUN HYDRAULICS
- Material:DNDATUV814N
- Model:DNDA-TUV@814N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDATUV814N (DNDATUV814N) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is fatigue-rated for service up to 5000 psi (350 bar) and requires no minimum hydraulic pressure for operation. It features several manual override options, though these are not compatible with weatherized coils. The D, L, and T control models include a detent mechanism for temporary actuation with a mechanical life expectancy of approximately 7,000 cycles. This cartridge uses EPDM seals suitable for phosphate ester fluids but not compatible with petroleum-based fluids. The wet armature design allows the working fluid to surround the armature, which can be affected by the heat from the coil during prolonged energization. This may impact certain fluids like water-glycol mixtures over time. The solenoid's magnetic design ensures high efficiency and reliable valve shifting with interchangeable coils that can be mounted in either direction. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize potential internal binding due to installation torque or machining variations. It fits into a T31A cavity and is part of Series 1 with a capacity of 10 gpm (40 L/min). The maximum operating pressure is 5000 psi (350 bar), and typical response time is around 50 ms. Maximum leakage at specified conditions is limited to 10 in\u00b3/min (160 cc/min). Manual override requires a force of 5 lbs/1000 psi on Port 1 with a stroke of .10 inches (2.5 mm). The valve has a hex size of .78 inches (22.2 mm) and an installation torque between 30-35 lbf ft (41-47 Nm). Model weight is approximately .60 lb (.30 kg), and Viton seal kits are available for maintenance needs.
The Sun Hydraulics DNDATUV814N (DNDATUV814N) is a solenoid-operated 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. This valve is fatigue-rated for service up to 5000 psi (350 bar) and requires no minimum hydraulic pressure for operation. It features several manual override options, though these are not compatible with weatherized coils. The D, L, and T control models include a detent mechanism for temporary actuation with a mechanical life expectancy of approximately 7,000 cycles. This cartridge uses EPDM seals suitable for phosphate ester fluids but not compatible with petroleum-based fluids. The wet armature design allows the working fluid to surround the armature, which can be affected by the heat from the coil during prolonged energization. This may impact certain fluids like water-glycol mixtures over time. The solenoid's magnetic design ensures high efficiency and reliable valve shifting with interchangeable coils that can be mounted in either direction. Coil connector options provide ratings up to IP69K for enhanced environmental protection. The valve incorporates Sun's floating style construction to minimize potential internal binding due to installation torque or machining variations. It fits into a T31A cavity and is part of Series 1 with a capacity of 10 gpm (40 L/min). The maximum operating pressure is 5000 psi (350 bar), and typical response time is around 50 ms. Maximum leakage at specified conditions is limited to 10 in\u00b3/min (160 cc/min). Manual override requires a force of 5 lbs/1000 psi on Port 1 with a stroke of .10 inches (2.5 mm). The valve has a hex size of .78 inches (22.2 mm) and an installation torque between 30-35 lbf ft (41-47 Nm). Model weight is approximately .60 lb (.30 kg), and Viton seal kits are available for maintenance needs.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ