SUN HYDRAULICS
DNDASUV214N
$190.40 USD
Tags:
- SUN HYDRAULICS
- Material:DNDASUV214N
- Model:DNDA-SUV@214N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDASUV214N (DNDASUV214N) is a solenoid-operated 4-way, 2-position cartridge valve designed for precise directional control with a soft shift feature to minimize system shock during actuation. This direct-acting, balanced spool valve is particularly suitable for applications where reducing pressure spikes is crucial, though it may not be ideal for scenarios requiring precise timing control. The soft shift feature increases response time compared to standard solenoids, with typical response times ranging from 150 ms to 300 ms depending on factors like flow, pressure, and temperature. For optimal performance, port 1 should maintain positive pressure. Equipped with a push-type manual override, this valve offers flexibility in manual control without compromising its soft shift capability. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and incorporates a wet armature design that enhances efficiency by using the working fluid to dissipate heat generated by the coil. However, users should be cautious of potential varnish formation in certain fluids when the coil is energized for extended periods. The DNDASUV214N includes advanced coil connector options rated up to IP69K for robust environmental protection and employs Sun's floating style construction to prevent internal component binding due to installation torque variations. With a capacity of 4 gpm (15 L/min) and maximum operating pressure of 5000 psi (350 bar), this cartridge valve is highly efficient and reliable in demanding hydraulic systems. The valve's compact design features a .75-inch solenoid tube diameter and requires an installation torque between 30-35 lbf ft (41-47 Nm). A Viton seal kit (990431006) is available for maintenance needs.
The Sun Hydraulics DNDASUV214N (DNDASUV214N) is a solenoid-operated 4-way, 2-position cartridge valve designed for precise directional control with a soft shift feature to minimize system shock during actuation. This direct-acting, balanced spool valve is particularly suitable for applications where reducing pressure spikes is crucial, though it may not be ideal for scenarios requiring precise timing control. The soft shift feature increases response time compared to standard solenoids, with typical response times ranging from 150 ms to 300 ms depending on factors like flow, pressure, and temperature. For optimal performance, port 1 should maintain positive pressure. Equipped with a push-type manual override, this valve offers flexibility in manual control without compromising its soft shift capability. It features a fatigue-rated solenoid tube assembly for up to 5000 psi (350 bar) service and incorporates a wet armature design that enhances efficiency by using the working fluid to dissipate heat generated by the coil. However, users should be cautious of potential varnish formation in certain fluids when the coil is energized for extended periods. The DNDASUV214N includes advanced coil connector options rated up to IP69K for robust environmental protection and employs Sun's floating style construction to prevent internal component binding due to installation torque variations. With a capacity of 4 gpm (15 L/min) and maximum operating pressure of 5000 psi (350 bar), this cartridge valve is highly efficient and reliable in demanding hydraulic systems. The valve's compact design features a .75-inch solenoid tube diameter and requires an installation torque between 30-35 lbf ft (41-47 Nm). A Viton seal kit (990431006) is available for maintenance needs.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a soft shift feature. The soft shift feature greatly reduces system shock due to valve actuation.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependant on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
Show FAQ