SUN HYDRAULICS
DNDASUN712N
$180.50 USD
Tags:
- SUN HYDRAULICS
- Material:DNDASUN712N
- Model:DNDA-SUN@712N
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDASUN712N (DNDASUN712N) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design with a soft shift capability. This design significantly minimizes system shock during valve actuation, although it is not recommended for applications requiring precise timing or ramping control. The valve's response time varies between 150 ms and 300 ms depending on factors such as flow, pressure, coil voltage, oil viscosity, and ambient temperature. It is interchangeable with standard cartridges but has lower performance limits due to the soft shift feature. For optimal performance, port 1 should maintain positive pressure. The valve includes a push-type manual override control; however, other manual controls are not compatible with the soft shift feature but can be installed in the field. The solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), utilizing a wet armature design that enhances solenoid efficiency and reliability by generating high spool actuating force per watt expended. The DNDASUN712N model incorporates Sun's floating style construction to reduce the risk of internal part binding due to installation torque or machining variations. It has a capacity of handling up to 4 gpm (15 L/min), with maximum leakage rates at specified conditions being minimal. The valve's coil connector options provide ratings up to IP69K for enhanced environmental protection. The cartridge fits into a T-31A cavity and requires an installation torque of 30-35 lbf ft (41-47 Nm). Weighing approximately 0.60 lb (0.30 kg), it offers reliable performance in various hydraulic systems where minimizing shock and ensuring smooth operation are critical requirements.
The Sun Hydraulics DNDASUN712N (DNDASUN712N) is a solenoid-operated, 4-way, 2-position cartridge valve featuring a direct-acting, balanced spool design with a soft shift capability. This design significantly minimizes system shock during valve actuation, although it is not recommended for applications requiring precise timing or ramping control. The valve's response time varies between 150 ms and 300 ms depending on factors such as flow, pressure, coil voltage, oil viscosity, and ambient temperature. It is interchangeable with standard cartridges but has lower performance limits due to the soft shift feature. For optimal performance, port 1 should maintain positive pressure. The valve includes a push-type manual override control; however, other manual controls are not compatible with the soft shift feature but can be installed in the field. The solenoid tube assembly is fatigue-rated for service pressures up to 5000 psi (350 bar), utilizing a wet armature design that enhances solenoid efficiency and reliability by generating high spool actuating force per watt expended. The DNDASUN712N model incorporates Sun's floating style construction to reduce the risk of internal part binding due to installation torque or machining variations. It has a capacity of handling up to 4 gpm (15 L/min), with maximum leakage rates at specified conditions being minimal. The valve's coil connector options provide ratings up to IP69K for enhanced environmental protection. The cartridge fits into a T-31A cavity and requires an installation torque of 30-35 lbf ft (41-47 Nm). Weighing approximately 0.60 lb (0.30 kg), it offers reliable performance in various hydraulic systems where minimizing shock and ensuring smooth operation are critical requirements.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve with a soft shift feature. The soft shift feature greatly reduces system shock due to valve actuation.
- The soft shift cartridge is interchangeable with the standard cartridge, however, the performance limits are lower.
- The soft shift feature can greatly reduce shock due to valve actuation but should not be counted upon in applications where timing is critical. If you need accurate ramping or timing control, consider Sun's electro-proportional valves.
- The soft shift feature results in significant increase in response time over Sun's standard solenoid. Response time is dependant on flow, pressure, coil voltage, oil viscosity and ambient temperature. Typical response time ranges from 150 ms to 300 ms.
- For consistent soft shift performance, port 1 should be at a positive pressure.
- This valve includes a push-type manual override control. Other manual control options such as T or D, cannot be ordered with the soft shift control but can be installed easily in the field. See Twist/Lock Manual Override link above for details. Please note: Manual override functionality is not compatible with weatherized coils.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 4 gpm15 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
Show FAQ