SUN HYDRAULICS
DNDAMZN512
$225.10 USD
Tags:
- SUN HYDRAULICS
- Material:DNDAMZN512
- Model:DNDA-MZN@512
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNDAMZN512 (DNDAMZN512) is a solenoid-operated 4-way, 2-position cartridge valve that features a direct-acting, balanced spool design, making it ideal for precise directional control in hydraulic systems. This valve is engineered to handle up to 5000 psi (350 bar) service pressure, thanks to its fatigue-rated solenoid tube assembly. It operates without the need for minimum hydraulic pressure, providing flexibility in various applications. The DNDAMZN512 offers several manual override options; however, note that these are not compatible with weatherized coils. Models with the D or L control include a detent mechanism intended for temporary actuation, with an expected mechanical life of approximately 7,000 cycles. This valve incorporates EPDM seals suitable for phosphate ester fluids but not recommended for petroleum-based fluids due to potential seal damage. Its wet armature design allows the working fluid to surround the armature, which can affect performance if the coil is energized for extended periods and certain fluids break down under heat exposure. Coil termination and voltage options are diverse and include surge protection features; coils are interchangeable within Sun's Series 1 solenoid products and can be mounted bidirectionally. The valve's magnetic design enhances efficiency by delivering high spool actuating force per watt expended, ensuring reliable operation. It supports a switching frequency of up to 15,000 cycles per hour and has a maximum leakage rate of 10 cubic inches per minute at 3000 psi (160 cc/min at 210 bar). The cartridge fits into T31A cavities and has a capacity of up to 10 gpm (40 L/min). It weighs approximately .60 lb (.30 kg) and requires installation torque between 30-35 lbf ft (41-47 Nm). Seal kits are available with Viton material compatibility.
The Sun Hydraulics DNDAMZN512 (DNDAMZN512) is a solenoid-operated 4-way, 2-position cartridge valve that features a direct-acting, balanced spool design, making it ideal for precise directional control in hydraulic systems. This valve is engineered to handle up to 5000 psi (350 bar) service pressure, thanks to its fatigue-rated solenoid tube assembly. It operates without the need for minimum hydraulic pressure, providing flexibility in various applications. The DNDAMZN512 offers several manual override options; however, note that these are not compatible with weatherized coils. Models with the D or L control include a detent mechanism intended for temporary actuation, with an expected mechanical life of approximately 7,000 cycles. This valve incorporates EPDM seals suitable for phosphate ester fluids but not recommended for petroleum-based fluids due to potential seal damage. Its wet armature design allows the working fluid to surround the armature, which can affect performance if the coil is energized for extended periods and certain fluids break down under heat exposure. Coil termination and voltage options are diverse and include surge protection features; coils are interchangeable within Sun's Series 1 solenoid products and can be mounted bidirectionally. The valve's magnetic design enhances efficiency by delivering high spool actuating force per watt expended, ensuring reliable operation. It supports a switching frequency of up to 15,000 cycles per hour and has a maximum leakage rate of 10 cubic inches per minute at 3000 psi (160 cc/min at 210 bar). The cartridge fits into T31A cavities and has a capacity of up to 10 gpm (40 L/min). It weighs approximately .60 lb (.30 kg) and requires installation torque between 30-35 lbf ft (41-47 Nm). Seal kits are available with Viton material compatibility.
This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- This cartridge has several manual override choices, including no manual override. See the CONFIGURATION section. Please note: Manual override functionality is not compatible with weatherized coils.
- On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
- Cartridges with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ