SUN HYDRAULICS
DNCAMSN924
$142.70 USD
Tags:
- SUN HYDRAULICS
- Material:DNCAMSN924
- Model:DNCA-MSN@924
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics DNCAMSN924 (DNCAMSN924) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions, minimizing oil loss during shifting, which is particularly beneficial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is not recommended due to potential performance issues. This valve can operate under high pressure conditions with its solenoid tube assembly rated for up to 5000 psi (350 bar) service and requires no minimum hydraulic pressure for activation. The DNCAMSN924 is compatible with systems using phosphate ester fluids when configured with EPDM seals; petroleum-based fluids can damage these seals. Its wet armature design allows the working fluid to cool the armature but may cause breakdowns in certain fluids like water-glycol mixtures over prolonged energization periods. The solenoid's magnetic design ensures efficient operation with high actuating force per watt expended, promoting reliable valve shifting. The cartridge incorporates Sun's floating style construction to reduce internal part binding due to installation torque or cavity machining variations. It offers a variety of coil termination and voltage options, some providing surge protection and environmental ratings up to IP69K for enhanced durability. Coils are interchangeable with other Sun Series 1 products and can be mounted in either direction on the tube. Technical specifications include a flow capacity of 8 gpm (30 L/min), typical response time of 50 ms, maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), and a switching frequency of up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi and has a stroke length of .10 inches (2.5 mm). The valve dimensions include a hex size of .78 inches (22.2 mm) and an installation torque range between 30-35 lbf-ft (41-47 Nm).
The Sun Hydraulics DNCAMSN924 (DNCAMSN924) is a solenoid-operated, 4-way, 2-position cartridge valve designed for direct-acting, balanced spool directional control. It features a closed transition between positions, minimizing oil loss during shifting, which is particularly beneficial in pilot control circuits. The valve's capacity is optimized with port 3 as the inlet and port 1 as the tank; however, reverse flow is not recommended due to potential performance issues. This valve can operate under high pressure conditions with its solenoid tube assembly rated for up to 5000 psi (350 bar) service and requires no minimum hydraulic pressure for activation. The DNCAMSN924 is compatible with systems using phosphate ester fluids when configured with EPDM seals; petroleum-based fluids can damage these seals. Its wet armature design allows the working fluid to cool the armature but may cause breakdowns in certain fluids like water-glycol mixtures over prolonged energization periods. The solenoid's magnetic design ensures efficient operation with high actuating force per watt expended, promoting reliable valve shifting. The cartridge incorporates Sun's floating style construction to reduce internal part binding due to installation torque or cavity machining variations. It offers a variety of coil termination and voltage options, some providing surge protection and environmental ratings up to IP69K for enhanced durability. Coils are interchangeable with other Sun Series 1 products and can be mounted in either direction on the tube. Technical specifications include a flow capacity of 8 gpm (30 L/min), typical response time of 50 ms, maximum leakage of 10 in\u00b3/min at 3000 psi (160 cc/min at 210 bar), and a switching frequency of up to 15,000 cycles per hour. The manual override requires a force of approximately 5 lbs/1000 psi and has a stroke length of .10 inches (2.5 mm). The valve dimensions include a hex size of .78 inches (22.2 mm) and an installation torque range between 30-35 lbf-ft (41-47 Nm).
This solenoid-operated, 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve. The transition between positions is closed. The closed transition greatly reduces the loss of oil when shifting which can be of particular importance in pilot control circuits.
- Valve capacity is based on port 3 as the inlet and port 1 as the tank. Although reverse flow is possible, the same performance cannot be guaranteed and is not recommended.
- The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
- This valve is direct actuated and requires no minimum hydraulic pressure for operation.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
- A wide variety of coil termination and voltage options are available, with and without surge protection. See the CONFIGURATION section.
- The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
- Coils are interchangeable with other Sun Series 1 solenoid products and can be mounted on the tube in either direction.
- Coil connector options offer ratings up to IP69K. See individual coil product pages for details. Additional weatherized coils and kits are available for more complete environmental protection.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-31A |
| Series | 1 |
| Capacity | 8 gpm30 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Response Time - Typical | 50 ms50 ms |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 10 in³/min.@3000 psi160 cc/min.@210 bar |
| Switching Frequency | 15000 cycles/hr15000 cycles/hr |
| Manual Override Force Requirement | 5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1 |
| Manual Override Stroke | .10 in.2,5 mm |
| Solenoid Tube Diameter | .75 in.19 mm |
| Valve Hex Size | 7/8 in.22,2 mm |
| Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
| Model Weight | .60 lb0,30 kg |
| Seal kit - Cartridge | Viton: 990-431-006 |
| Seal and nut kit - Coil | Viton: 990-770-006Viton: 990-770-006 |
Show FAQ