SUN HYDRAULICS
CXBAXAN/LH
$46.00 USD
Tags:
- SUN HYDRAULICS
- Material:CXBAXAN/LH
- Model:CXBA-XAN/LH
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXBAXAN/LH (CXBAXAN/LH) is a precision-engineered check valve designed for hydraulic systems requiring reliable, one-way flow control. This model features a free-flow, nose-to-side configuration that permits unrestricted flow from its inlet port 1 to the outlet port 2 while effectively blocking reverse flow. It is distinguished by its extremely low leakage rate, which is less than 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. Constructed to handle high-pressure applications, the CXBAXAN/LH can withstand up to 5000 psi (350 bar) at both ports. Its robust design includes Sun\u2019s floating style construction which reduces the risk of internal parts binding\u2014a common issue caused by excessive installation torque or variations in cavity/cartridge machining. This model utilizes EPDM seals specifically designed for compatibility with phosphate ester fluids; however, these seals must not be exposed to petroleum-based fluids as they can cause damage. The valve fits within a T-16A cavity and supports a maximum flow capacity of 10 gpm (40 L/min). For installation, it requires a hex size of 3/4 in. (19.1 mm) and an installation torque between 20 and 25 lbf\u00b7ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), the CXBAXAN/LH offers a compact yet powerful solution for hydraulic circuit applications where space and reliability are critical considerations.
The Sun Hydraulics CXBAXAN/LH (CXBAXAN/LH) is a precision-engineered check valve designed for hydraulic systems requiring reliable, one-way flow control. This model features a free-flow, nose-to-side configuration that permits unrestricted flow from its inlet port 1 to the outlet port 2 while effectively blocking reverse flow. It is distinguished by its extremely low leakage rate, which is less than 1 drop per minute (0.07 cc/min), ensuring efficient operation and minimal fluid loss. Constructed to handle high-pressure applications, the CXBAXAN/LH can withstand up to 5000 psi (350 bar) at both ports. Its robust design includes Sun\u2019s floating style construction which reduces the risk of internal parts binding\u2014a common issue caused by excessive installation torque or variations in cavity/cartridge machining. This model utilizes EPDM seals specifically designed for compatibility with phosphate ester fluids; however, these seals must not be exposed to petroleum-based fluids as they can cause damage. The valve fits within a T-16A cavity and supports a maximum flow capacity of 10 gpm (40 L/min). For installation, it requires a hex size of 3/4 in. (19.1 mm) and an installation torque between 20 and 25 lbf\u00b7ft (27 - 33 Nm). Weighing just .20 lb (0.10 kg), the CXBAXAN/LH offers a compact yet powerful solution for hydraulic circuit applications where space and reliability are critical considerations.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ