SUN HYDRAULICS
CXBAXAN/AP
$126.80 USD
Tags:
- SUN HYDRAULICS
- Material:CXBAXAN/AP
- Model:CXBA-XAN/AP
- Summary:Cartridge
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics CXBAXAN/AP (CXBAXAN/AP) is a robust check valve designed for hydraulic applications requiring reliable, one-way flow. This model allows free flow from its inlet port 1 to outlet port 2 while effectively blocking flow in the reverse direction, ensuring operational efficiency and safety in hydraulic circuits. The CXBAXAN/AP features a maximum operating pressure of 5000 psi (350 bar) and can handle flows up to 10 gpm (40 L/min), making it suitable for high-pressure systems. This valve is designed with Sun Hydraulics' floating style construction which reduces the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining, enhancing its reliability and lifespan. Additionally, it boasts an exceptionally low leakage rate of less than 1 drop per minute (0.07 cc/min), which is crucial for maintaining system integrity and performance. The CXBAXAN/AP check valve uses EPDM seals configured specifically for systems utilizing phosphate ester fluids; however, these seals are not compatible with petroleum-based fluids, greases, and lubricants as exposure can lead to seal damage. For installation, the valve requires a hex size of 3/4 in (19.1 mm) and an installation torque between 20 - 25 lbf ft (27 - 33 Nm). Weighing just 0.20 lb (0.10 kg), this model combines lightweight design with high functionality and durability, making it an excellent choice for various hydraulic applications requiring dependable check valves.
The Sun Hydraulics CXBAXAN/AP (CXBAXAN/AP) is a robust check valve designed for hydraulic applications requiring reliable, one-way flow. This model allows free flow from its inlet port 1 to outlet port 2 while effectively blocking flow in the reverse direction, ensuring operational efficiency and safety in hydraulic circuits. The CXBAXAN/AP features a maximum operating pressure of 5000 psi (350 bar) and can handle flows up to 10 gpm (40 L/min), making it suitable for high-pressure systems. This valve is designed with Sun Hydraulics' floating style construction which reduces the risk of internal parts binding due to excessive installation torque or variations in cavity/cartridge machining, enhancing its reliability and lifespan. Additionally, it boasts an exceptionally low leakage rate of less than 1 drop per minute (0.07 cc/min), which is crucial for maintaining system integrity and performance. The CXBAXAN/AP check valve uses EPDM seals configured specifically for systems utilizing phosphate ester fluids; however, these seals are not compatible with petroleum-based fluids, greases, and lubricants as exposure can lead to seal damage. For installation, the valve requires a hex size of 3/4 in (19.1 mm) and an installation torque between 20 - 25 lbf ft (27 - 33 Nm). Weighing just 0.20 lb (0.10 kg), this model combines lightweight design with high functionality and durability, making it an excellent choice for various hydraulic applications requiring dependable check valves.
Free-flow, nose-to-side check valves are on/off circuit components that allow free flow from the inlet (port 1) to the outlet (port 2) and block flow in the opposite direction.
- Two-port check valves share the same cavity for a given frame size, however, pay close attention as flow paths may be in opposite directions.
- Check valves offer extremely low leakage rates with a maximum leakage of less than 1 drop per minute (0,07 cc/min).
- Will accept 5000 psi (350 bar) at ports 1 and 2.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Cavity | T-162A |
| Series | 0 |
| Capacity | 10 gpm40 L/min. |
| Maximum Operating Pressure | 5000 psi350 bar |
| Maximum Valve Leakage at 110 SUS (24 cSt) | 1 drops/min.0,07 cc/min. |
| Valve Hex Size | 3/4 in.19,1 mm |
| Valve Installation Torque | 20 - 25 lbf ft27 - 33 Nm |
| Model Weight | .20 lb0,10 kg |
| Seal kit - Cartridge | Viton: 990-162-006 |
Show FAQ