HENGST
1010110B

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hengst directly.***
The Hengst SE 560 P10-S00-01B0,2-S0M00 (1010110B) is a hydraulic-suction filter designed to provide direct wear protection for pumps by filtering contaminants from fluid in the suction line. It is intended for lateral tank mounting below the oil level, ensuring effective filtration before fluid reaches the pump. This suction filter features a nominal size of 560 and is constructed with filter paper media designated as P10, offering a filtration grade of 10 microns. The housing is made from a combination of carbon steel and aluminum, with zinc-plated support cages for enhanced durability. The SE series filter includes a vacuum switch indicator with a switching point set at 0.2 bar, alerting users when maintenance or replacement is necessary. Its port design adheres to SAE standards and features a horizontal port position suitable for 4\" - 3000 psi applications. The seal material used in this model is NBR, known for its resistance to oil and wear. Additionally, this filter does not have hfc/hfa suitability or DIN24550 compliance but maintains standard collapse pressure ratings with an adhesive basis of PUR-Basis. Its design does not incorporate cyclone effects or bypass valves, maintaining simplicity and reliability in operation.