BOSCH REXROTH
R911173210
$973.07 USD
- BOSCH REXROTH
- Material:R911173210
- Model:S67-DIO4-HS-M12
Quantity in stock: 0
The Bosch Rexroth S67-DIO4-HS-M12 (R911173210) is a high-speed digital I/O module designed to effectively acquire and output digital signals within automated systems. This particular S module seamlessly integrates with remote systems via an S fieldbus coupler, which is utilized for setting parameters, thereby facilitating a streamlined and efficient operational setup. The module boasts extensive diagnostic capabilities, ensuring that system operators can maintain oversight over the performance and quickly address any potential issues that may arise. The robust design of the S67-DIO4-HS-M12 allows for a significant distance between two modules in an S station setup, ensuring flexibility in system design. This flexibility is further enhanced by the allowance for a considerable total extension length across the connected modules, which enables adaptability to various industrial applications. The utilization of an M12 connector ensures reliable connectivity in industrial environments where robustness and durability are paramount. This module's capacity to handle high-speed signal processing makes it an ideal choice for applications requiring rapid response times and precise control. It is well-suited for use in scenarios where digital signals are pivotal, such as in manufacturing automation, process control systems, and other applications demanding quick and accurate digital data handling. The Bosch Rexroth S67-DIO4-HS-M12 represents a blend of performance, reliability, and diagnostic proficiency that can significantly enhance the operational capabilities of sophisticated automated systems.
This S67 module is used to acquire and output digital signals. It is connected remotely using an S67 fieldbus coupler. Parameters are set through the fieldbus coupler and offer a broad range of diagnostic options. The maximum distance between two modules in an S67 station is 50 meters, with a maximum total extension of 500 meters.
General data
|
Type |
S67-DIO4-HS-M12 | |
|
Weight |
g |
255 |
|
Operating mode |
Event counter, gate time counter, pulse duration measurement | |
|
Ambient temperature (operation) |
-25 °C ... +60 °C | |
|
Air pressure (operation) |
795 ... 1080 hPa | |
|
Protection type |
IP67 | |
Interface local bus
|
Type |
S67-DIO4-HS-M12 | |
|
Designation |
System bus | |
|
Connection type |
B-coded 5-pin shielded M12 plug | |
Supply of module electronics
|
Type |
S67-DIO4-HS-M12 | |
|
Connection type |
A-coded 4-pin M12 plug | |
|
Current carrying capacity of supply connections 1) |
A |
≤ 8 |
|
Voltage supply logic and sensors ULS |
V DC |
24 |
|
Voltage supply actuators UA |
V DC |
24 |
|
Current consumption from ULS |
mA |
40 |
|
Current consumption from UA |
30 mA + actuators (max. 800 mA) | |
|
Reverse polarity protection |
For ULS + UA | |
| 1) | (ULS: 4 A, UA: 4 A) |
Digital inputs
|
Type |
S67-DIO4-HS-M12 | |
|
Number of digital inputs |
4 | |
|
Connection type |
A-coded 5-pin M12 plug | |
|
Connectivity technology |
2-, 3-wire technology | |
|
Dimensioning of inputs |
Type 1, acc. to IEC 61131-2 | |
|
Nominal input voltage UINenn |
V DC |
24 |
|
Nominal input voltage UINenn (Control input) |
V DC |
24 |
|
Nominal input current at UINenn |
mA |
2.9 |
|
Nominal input current at UINenn (Control input) |
mA |
2.9 |
|
Front-end processing time (hardware) |
µs |
< 3 |
|
Short-circuit protection |
Sensor/actuator supply | |
Counter input
|
Type |
S67-DIO4-HS-M12 | |
|
Number of inputs |
1 | |
|
Input frequency |
f ≤ 1 kHz - |
|
|
Counter depth |
bits |
16 |
Digital outputs
|
Type |
S67-DIO4-HS-M12 | |
|
Number of digital outputs |
4 | |
|
Connection type |
4-pin M12 plug | |
|
Connectivity technology |
2-, 3-wire technology | |
|
Nominal output voltage UOut |
V DC |
24 |
|
Nominal current INenn each channel |
A |
0.2 |
|
Total current |
A |
≤ 0.8 |
|
Front-end processing time (hardware) |
µs |
< 0.5 |
|
Short-circuit protection, overload protection of the outputs |
Yes, thermal shutdown | |
Mechanical tests
|
Type |
S67-DIO4-HS-M12 | |
|
Vibration resistance |
Acc. to IEC 60068-2-6 | |
|
Shock |
Acc. to IEC 60068-2-27 | |
|
Approvals |
|
The current approvals can be found at www.boschrexroth.com. |
Dimensions
|
Type |
S67-DIO4-HS-M12 | |
|
A |
mm |
50 |
|
B |
mm |
117 |
|
C1 |
mm |
10.7 |
|
C2 |
mm |
25 |