BOSCH REXROTH
R911173206
$2,612.91 USD
- BOSCH REXROTH
- Material:R911173206
- Model:S67-SSI-INC-M12
Quantity in stock: 0
The Bosch Rexroth S67-SSI-INC-M12 (R911173206) is a sophisticated module designed to interface with SSI and incremental encoders in automation applications. This module is adept at reading encoder signals and is typically connected remotely via an S fieldbus coupler, which is also used for setting parameters. The design of the S67-SSI-INC-M12 ensures ease of integration into various control systems, allowing for a flexible setup in industrial environments. One of the key capabilities of this module includes its extensive diagnostic features, which enable users to monitor and troubleshoot their systems effectively. The Bosch Rexroth S67-SSI-INC-M12 maximizes operational reliability by providing detailed feedback on the encoder status and communication integrity. The module's architecture allows for a significant distance between two modules within an S station, ensuring that it can accommodate different layout configurations within a facility. Additionally, the maximum total extension capability ensures that this module can be effectively used in larger installations without compromising signal integrity or performance. Overall, the Bosch Rexroth S67-SSI-INC-M12 is an integral component for applications requiring precise motion control and feedback, offering robustness and precision in reading encoder data while maintaining ease of use through remote connectivity and comprehensive diagnostics.
This S67 module is used to read SSI and incremental encoders. It is connected remotely using an S67 fieldbus coupler. Parameters are set through the fieldbus coupler and offer a broad range of diagnostic options. The maximum distance between two modules in an S67 station is 50 meters, with a maximum total extension of 500 meters.
General data
|
Type |
S67-SSI-INC-M12 | |
|
Operating mode |
Event counter, gate time counter, pulse duration measurement | |
|
Ambient temperature (operation) |
-25 °C ... +60 °C | |
|
Permissible relative humidity (operation) |
5 ... 90%, no dewing | |
|
Air pressure (operation) |
795 ... 1080 hPa | |
|
Protection type |
IP67 | |
Interface local bus
|
Type |
S67-SSI-INC-M12 | |
|
Designation |
System bus | |
|
Connection type |
B-coded 5-pin shielded M12 plug | |
Supply of module electronics
|
Type |
S67-SSI-INC-M12 | |
|
Connection type |
A-coded 4-pin M12 plug | |
|
Current carrying capacity of supply connections 1) |
A |
≤ 8 |
|
Voltage supply logic and sensors ULS |
V DC |
24 |
|
Voltage supply actuators UA |
V DC |
24 |
|
Current consumption from ULS |
mA |
50 |
|
Current consumption from UA |
25 mA + actuators (max. 800 mA) | |
|
Reverse polarity protection |
For ULS + UA | |
| 1) | (ULS: 4 A, UA: 4 A) |
Digital inputs
|
Type |
S67-SSI-INC-M12 | |
|
Number of digital inputs |
4 | |
|
Connection type |
A-coded 3-pin M12 plug | |
|
Connectivity technology |
2-, 3-wire technology | |
|
Dimensioning of inputs |
Type 2, acc. to EN 61131-2 | |
|
Nominal input voltage UINenn |
V DC |
24 |
|
Nominal input voltage UINenn (Control input) |
V DC |
24 |
|
Nominal input current at UINenn |
mA |
7.3 |
|
Nominal input current at UINenn (Control input) |
mA |
2.9 |
|
Front-end processing time (hardware) |
µs |
< 3 |
|
Short-circuit protection |
Sensor/actuator supply | |
Counter input
|
Type |
S67-SSI-INC-M12 | |
|
Input frequency |
f ≤ 1 MHz - |
|
|
Counter depth |
bits |
32 |
Digital outputs
|
Type |
S67-SSI-INC-M12 | |
|
Number of digital outputs |
4 | |
|
Connection type |
4-pin M12 plug | |
|
Connectivity technology |
2-, 3-wire technology | |
|
Nominal output voltage UOut |
V DC |
24 |
|
Nominal current INenn each channel |
A |
0.1 |
|
Total current |
A |
≤ 0.4 |
|
Front-end processing time (hardware) |
µs |
< 10 |
|
Short-circuit protection, overload protection of the outputs |
Yes, thermal shutdown | |
Encoder detection
|
Type |
S67-SSI-INC-M12 | |
|
Type |
Incremental encoder input | |
|
Number |
2 | |
|
Description of the input |
RS-422 differential signal | |
|
Signal connection type |
A-coded 8-pin shielded M12 plug | |
|
Input frequency |
1 MHz - |
|
|
Encoder supply voltage |
V DC |
5 24 |
|
Type |
SSI encoder input | |
|
Number |
2 | |
|
Description of the input |
RS-422 differential signal | |
|
Signal connection type |
A-coded 8-pin shielded M12 plug | |
|
Encoder supply voltage |
V DC |
5 24 |
|
Resolution |
8 … 32 Bit | |
|
Transmission frequency |
62.5 kHz ... 2 MHz | |
Mechanical tests
|
Type |
S67-SSI-INC-M12 | |
|
Vibration resistance |
Acc. to IEC 60068-2-6 | |
|
Shock |
Acc. to IEC 60068-2-27 | |
Norms and Standards
|
Type |
S67-SSI-INC-M12 | |
|
Certifications |
UL 508 - - - - - - |
|
|
Approvals |
|
The current approvals can be found at www.boschrexroth.com. |
Dimensions
|
Type |
S67-SSI-INC-M12 | |
|
A |
mm |
50 |
|
B |
mm |
117 |
|
C1 |
mm |
10.7 |
|
C2 |
mm |
25 |