BOSCH REXROTH
R900591772
$1,171.30 USD
- BOSCH REXROTH
- Material:R900591772
- Model:DZ6DP2-5X/60XMW2
Quantity in stock: 0
The Bosch Rexroth DZ6DP2-5X/60XMW2 (R900591772) is a direct-operated pressure sequence valve designed for efficient control of hydraulic systems. This model plays a critical role in ensuring the pressure-dependent connection of secondary systems by setting sequencing pressure via its adjustable type. It features a robust compression spring that maintains the control spool in its initial position, effectively blocking the valve until the predetermined pressure threshold is reached. Upon reaching the set value, the control spool shifts to allow fluid flow from channel P to A, enabling connected systems to operate without pressure loss in channel P. The DZ6DP2-5X/60XMW2 offers versatile control signal reception, either internally from channel P or externally through port BX. Moreover, it accommodates different methods for leakage oil discharge: externally via port TY or internally through A, with internal discharge affecting the set cracking pressure due to channel A's influence. This model allows for the optional installation of a check valve for unidirectional hydraulic fluid return from channel A to P and includes a pressure gauge connection for monitoring sequencing pressure directly at the valve. Designed for subplate mounting, it conforms to DIN form A standards without a locating hole and ISO standards with a locating hole. The DZ6DP2-5X/60XMW2 comes with an array of optional adjustment types such as a rotary knob, threaded pin with hexagon and protective cap, lockable rotary knob with scale, and rotary knob with scale. Its configuration also provides options for subplates ordered separately. With its size and component series X designation, this valve can handle maximum operating pressures up to bar and achieves maximum flow rates measured in liters per minute (l/min).
Valve type DZ 6 DP is a direct operated pressure sequence valve. It is applied for pressure-dependent connection of a second system. The sequencing pressure is set via the adjustment type (4).
The compression spring (3) holds the control spool (2) in initial position, the valve is blocked. The pressure in channel P is applied via the control line (6) at the spool face of the control spool (2) opposite the compression spring (3).
If the pressure in channel P reaches the set value of the compression spring (3), the control spool (2) is moved to the left and the connection from P to A is opened. The system connected to channel A is connected without a pressure drop in channel P.
The control signal is received internally via the control line (6) from channel P or externally via port B (X).
Depending on the use of the valve, leakage oil discharge is realized externally via port T (Y) or internally via A.
Attention!
With internal leakage oil discharge, the set cracking pressure is increased by the pressure in channel A.
A check valve (5) can be optionally installed for free hydraulic fluid return flow back from channel A to channel P.
A pressure gauge connection (1) enables control of the sequencing pressure at the valve.
Type DZ 6 DP1–5X/…
Type DZ 6 DP1–5X/.XYM…
|
01 |
02 |
03 |
04 |
05 |
06 |
07 |
08 |
09 |
||
|
DZ 6 DP |
– |
5X |
/ |
* |
|
01 |
Pressure sequence valve NG6, direct operated |
DZ 6 DP |
|
Adjustment type |
||
|
02 |
Rotary knob |
1 |
|
Grub screw with hexagon and protective cap |
2 |
|
|
Lockable rotary knob with scale 1) |
3 |
|
|
Rotary knob with scale |
7 |
|
|
03 |
Component series 50 … 59 (50 … 59: unchanged installation and connection dimensions) |
5X |
|
04 |
Maximum sequencing pressure 25 bar |
25 |
|
Maximum sequencing pressure 75 bar |
75 |
|
|
Maximum sequencing pressure 150 bar |
150 |
|
|
Maximum sequencing pressure 210 bar |
210 |
|
|
Maximum sequencing pressure 315 bar |
3152) |
|
|
05 |
Internal pilot oil supply, internal leakage oil discharge |
no code |
|
External pilot oil supply, internal leakage oil discharge |
X |
|
|
Internal pilot oil supply, external leakage oil discharge |
Y |
|
|
External pilot oil supply, external leakage oil discharge |
XY |
|
|
06 |
With check valve |
no code |
|
Without check valve |
M |
|
|
Seal material |
||
|
07 |
NBR seals |
no code |
|
FKM seals (other seals upon request) |
V |
|
|
Observe compatibility of seals with hydraulic fluid used. |
||
|
08 |
Without locating hole |
no code |
|
With locating hole |
/603) |
|
|
09 |
Further details in the plain text |
* |
| 1) H-key with material no. R900008158 is included in the scope of delivery. | |
| 2) Only with adjustment type "2" and without check valve | |
| 3) Locking pin ISO 8752-3x8-St, material no. R900005694 (separate order) |
general
|
Size |
6 | ||
|
Weight (approx.) |
kg |
1.2 | |
|
Installation position |
any | ||
|
Ambient temperature range |
NBR seals |
°C |
-30 … +80 |
|
FKM seals |
°C |
-20 … +80 | |
hydraulic
|
Size |
6 | ||
|
Maximum operating pressure |
Port P |
bar |
315 |
|
Anschluss A |
bar |
315 | |
|
Port B (X) |
bar |
315 | |
|
Port T (Y) |
bar |
160 | |
|
Maximum sequencing pressure |
adjustable |
bar |
25 75 150 210 315 |
|
Maximum flow |
l/min |
60 | |
|
Hydraulic fluid |
see table | ||
|
Hydraulic fluid temperature range |
NBR seals |
°C |
-30 … +80 |
|
FKM seals |
°C |
-20 … +80 | |
|
Viscosity range |
mm²/s |
10 … 800 | |
|
Maximum admissible degree of contamination of the hydraulic fluid 1) |
Class 20/18/15 according to ISO 4406 (c) | ||
| 1) | The cleanliness classes specified for the components must be adhered to in hydraulic systems. Effective filtration prevents faults and simultaneously increases the life cycle of the components. For the selection of the filters, see www.boschrexroth.com/filter. |
|
Hydraulic fluid |
Classification |
Suitable sealing materials |
Standards |
|
|
Mineral oil |
HL, HLP |
FKM, NBR |
DIN 51524 1) |
|
|
Bio-degradable |
Insoluble in water |
HEES (synthetic esters) 2) |
FKM |
VDMA 24568 |
|
HETG (rape seed oil) 1) |
FKM, NBR |
|||
|
Soluble in water |
HEPG (polyglycols) 2) |
FKM |
VDMA 24568 |
|
|
Other hydraulic fluids on request |
||||
| 1) suitable for NBR and FKM seals | |
| 2) suitable for FKM seals only |
For applications outside these parameters, please consult us!
(measured with HLP46, ϑOil = 40 ±5 °C)
Δp-qV characteristic curves
Δp-qV characteristic curves
The characteristic curves apply for outlet pressure = zero in the entire flow range!
Version "no code"
Version “X"
Version “Y”
Version “XY"
Dimensions in mm
|
1 |
Name plate |
|
2 |
Adjustment type "1" |
|
3 |
Adjustment type "2" |
|
4 |
Adjustment type "3" |
|
5 |
Adjustment type "7" |
|
6 |
Dimensions required to remove the key |
|
7 |
Valve mounting bores |
|
8 |
Lock nut SW24 |
|
9 |
Hexagon SW10 |
|
10 |
Identical seal rings for ports A, B(X), P, T(Y) |
|
11 |
Pressure gauge connection G1/4; 12 mm deep; internal hexagon SW6 |
|
12 |
Without check valve |
|
13 |
With check valve |
|
14 |
Porting pattern according to DIN 24340 form A (without locating hole), or ISO 4401-03-02-0-05 (with locating hole for locking pin ISO 8752-3x8-St, material no. R900005694, separate order) |
Subplates (separate order)
(without locating hole)
G 341/01 (G1/4)
G 342/01 (G3/8)
G 502/01 (G1/2)
(with locating hole)
G 341/60 (G1/4)
G 342/60 (G3/8)
G 502/60 (G1/2)
Valve mounting screws (separate order)
4 hexagon socket head cap screws
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µtotal = 0.09 to 0.14,
Tightening torque MA = 7 Nm ± 10 %,
material no. R913000064
Pipe thread (G..) according to ISO 228/1