BOSCH REXROTH
R150245065

$1,048.03 USD

BOSCH REXROTH
Material:R150245065
Model:FEM-E-C40X12RX6-4

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth FEM-E-C 40X12RX6-4 (R150245065) is a high-precision ball screw assembly designed for linear motion applications. This single nut with flange FEMEC model is engineered with a nominal diameter of 40 mm and a lead of 12 mm, featuring a right-hand thread direction for seamless integration into various mechanical systems. It incorporates a robust design with mounting dimensions similar to DIN standards, providing versatility and ease of installation. The FEM-E-C 40X12RX6-4 is equipped with standard seals and standard axial clearance, ensuring reliable operation under diverse conditions. It comes in preload classes ranging from C0 to C5, which allows users to select the appropriate level of rigidity based on their application requirements. The ball screw nut boasts an impressive dynamic load capacity and operates within a temperature range of -10°C to +80°C, making it suitable for environments where temperature fluctuations are common. Designed for durability and performance, this model features a flange type 'C' configuration, although a type 'B' flange is also available. The product is part of the Standard series within Bosch Rexroth's product lineup, characterized by its ball diameter Dw, number of ball track turns i, and adherence to tolerance grade T3 for sizes as per the product overview for screws. In terms of technical specifications, the FEM-E-C 40X12RX6-4 can achieve maximum permissible linear speeds (vmax) while maintaining its static load rating C0. Users can expect consistent performance even when operating at continuous temperatures up to 80°C with temporary peaks up to 100°C—conditions measured on the outer shell of the nut. Overall, this ball screw assembly is an ideal solution for those seeking precise control over linear movements in their machinery or equipment. With its robust construction and adaptable design features, it meets the stringent requirements expected in various applications without compromising on quality or efficiency.

Single nut with flange FEM-E-C, size 40 x 12R x 6 - 4

Single nut with flange FEM-E-C with standard seal and standard axial clearance
Nominal diameter d0 = 40
Lead P = 12 (right)
Ball diameter Dw = 6
Number of ball track turns i = 4

Unpacked Weight: 1.5 kg

Product overview

Mounting dimensions similar to DIN 69051, Part 5 flange type C (flange type B available).
With seals
With left-hand version in some cases
Preload class: C0, C00, C1, C2, C3
Tolerance grade: T3 (for sizes as per the product overview for screws, see general technical notes and information, “Product description”), T5, T7, T9

Data Sheet	Download Data Sheet
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Size D5	93
Size L with tolerance	75 mm
Bearing temperature max	+80
Nut type	FEM-E-C single nut with flange
Series	Standard series
Bearing temperature min	-15
Productgroup ID	17
Nut or screw	Screw drive nut
Screw drive version (drive type)	Ball screw assembly
Maximum operating temperature	+80
Footnote dynamic load capacity C	The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f_ac (see General Technical Notes and Information "Technical Data", Technical Notes).
Bearing temperature	-15 °C ... +80 °C
Category	A
Minimum operating temperature	-10
Size L4	25
Size D6	78
Size L3	15
Size L9	81.5
Size D7	9
Size L10	60
Operating temperature	-10 °C ... +80 °C
Maximum permissible linear speed vmax (m/min)	45
Lead	12
Footnote static load capacity C0	The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f_ac (see General Technical Notes and Information "Technical Data", Technical Notes).
Hole pattern	BB1
Static load rating C0	86200
Size Sx	5
Footnote permissible operating temperature (min...max)	Ball screw assemblies permit operation at continuous temperatures of up to 80 °C with temporary peaks of 100 °C, measurements taken on the outer shell of the nut in each case.
Size D1 g6	63
Dynamic load capacity C	59900
Size d1	38
Size L	75
Size d2	33.8
Footnote operating temperature max.	Ball screw assemblies permit operation at continuous temperatures of up to 80°C with temporary peaks of 100°C, measurements taken on the outer shell of the nut in each case.
Note: Maximum permissible speed vmax	See "Characteristic speed d₀• n" (section Technical notes) and "Critical speed n_cr" (section Calculation and examples)
Weight	1.5
Nominal size	40 x 12R x 6 - 4

Technical data for nuts

Size	C	C0	vmax	Mass
d0 x P x Dw - i	N	N	m/min	kg
16 x 5R x 3 - 4	14800 1)	16100 1)	30 2)	0.19
16 x 10R x 3 - 3	11500 1)	12300 1)	60 2)	0.21
16 x 16R x 3 - 3	11200 1)	12000 1)	96 2)	0.26
20 x 5R x 3 - 4	17200 1)	21500 1)	30 2)	0.31
20 x 10R x 3 - 4	16900 1)	21300 1)	60 2)	0.4
20 x 20R x 3,5 - 3	16000 1)	18800 1)	120 2)	0.49
25 x 5R x 3 - 4	19100 1)	27200 1)	30 2)	0.36
25 x 10R x 3 - 4	18800 1)	27000 1)	60 2)	0.47
25 x 25R x 3,5 - 3	17600 1)	23300 1)	150 2)	0.63
32 x 5R x 3,5 - 4	25900 1)	40000 1)	23 2)	0.62
32 x 10R x 3,969 - 5	38000 1)	58300 1)	47 2)	0.84
32 x 20R x 3,969 - 3	23600 1)	33700 1)	94 2)	0.9
32 x 32R x 3,969 - 3	23400 1)	34000 1)	150 2)	1.21
40 x 5R x 3,5 - 5	34900 1)	64100 1)	19 2)	1.03
40 x 10R x 6 - 4	60000 1)	86400 1)	38 2)	1.19
40 x 10R x 6 - 6	86500 1)	132200 1)	38 2)	1.49
40 x 12R x 6 - 4	59900 1)	86200 1)	45 2)	1.27
40 x 16R x 6 - 4	59600 1)	85900 1)	60 2)	1.51
40 x 20R x 6 - 3	45500 1)	62800 1)	75 2)	1.44
40 x 25R x 6 - 4	56900 1)	85800 1)	93 2)	1.91
40 x 30R x 6 - 4	56300 1)	85100 1)	112 2)	2.21
40 x 40R x 6 - 3	44400 1)	62300 1)	150 2)	2.16
50 x 5R x 3,5 - 5	38400 1)	81300 1)	15 2)	1.39
50 x 10R x 6 - 6	95600 1)	166500 1)	30 2)	2.14
50 x 12R x 6 - 6	95500 1)	166400 1)	36 2)	2.38
50 x 16R x 6 - 6	95300 1)	166000 1)	48 2)	2.75
50 x 20R x 6,5 - 5	90800 1)	149700 1)	60 2)	2.73
50 x 30R x 6,5 - 4	71300 1)	118800 1)	90 2)	3.12
50 x 40R x 6,5 - 3	55800 1)	85900 1)	120 2)	3.04
63 x 10R x 6 - 6	106600 1)	214300 1)	24 2)	2.56
63 x 20R x 6,5 - 5	100700 1)	190300 1)	48 2)	4.51
63 x 40R x 6,5 - 3	64100 1)	114100 1)	95 2)	5.04
80 x 10R x 6,5 - 6	130100 1)	291700 1)	19 2)	3.4
80 x 20R x 12,7 - 6	315200 1)	534200 1)	30 2)	10.2
16 x 5L x 3 - 4	14800 1)	16100 1)		0.19
20 x 5L x 3 - 4	17200 1)	21500 1)		0.31
25 x 5L x 3 - 4	19100 1)	27200 1)		0.36
32 x 5L x 3,5 - 4	25900 1)	40000 1)	23 2)	0.62
40 x 5L x 3,5 - 5	34900 1)	64100 1)	19 2)	1.03
40 x 10L x 6 - 4	60000 1)	86400 1)	38 2)	1.19

1)	The load ratings are valid for tolerance grades T3 and T5 only. For other tolerance grades, please take into account the correction factor fac (see General Technical Notes and Information "Technical Data", Technical Notes).
2)	See "characteristic speed d0 • n" (section Technical notes) and "critical speed n"cr" (section Calculation and examples)

Operating conditions

Size	Admissible operating temperature (min ... max) 1)	Admissible storage temperature (min ... max)
d0 x P x Dw - i	Admissible operating temperature (min ... max) 1)	Admissible storage temperature (min ... max)
16 x 5R x 3 - 4	-10 °C ... +80 °C	-15 °C ... +80 °C
16 x 10R x 3 - 3
16 x 16R x 3 - 3
20 x 5R x 3 - 4
20 x 10R x 3 - 4
20 x 20R x 3,5 - 3
25 x 5R x 3 - 4
25 x 10R x 3 - 4
25 x 25R x 3,5 - 3
32 x 5R x 3,5 - 4
32 x 10R x 3,969 - 5
32 x 20R x 3,969 - 3
32 x 32R x 3,969 - 3
40 x 5R x 3,5 - 5
40 x 10R x 6 - 4
40 x 10R x 6 - 6
40 x 12R x 6 - 4
40 x 16R x 6 - 4
40 x 20R x 6 - 3
40 x 25R x 6 - 4
40 x 30R x 6 - 4
40 x 40R x 6 - 3
50 x 5R x 3,5 - 5
50 x 10R x 6 - 6
50 x 12R x 6 - 6
50 x 16R x 6 - 6
50 x 20R x 6,5 - 5
50 x 30R x 6,5 - 4
50 x 40R x 6,5 - 3
63 x 10R x 6 - 6
63 x 20R x 6,5 - 5
63 x 40R x 6,5 - 3
80 x 10R x 6,5 - 6
80 x 20R x 12,7 - 6
16 x 5L x 3 - 4
20 x 5L x 3 - 4
25 x 5L x 3 - 4
32 x 5L x 3,5 - 4
40 x 5L x 3,5 - 5
40 x 10L x 6 - 4

1)	Ball screw assemblies are suitable for continuous operation at temperatures up to 80 °C with temporary peaks of 100 °C (measurements taken on the outer shell of the nut).

Legend

Symbol	Description	Unit
d0	Nominal diameter	mm
P	Lead (R = right-hand, L = left-hand)
Dw	Ball diameter	mm
i	Number of ball track turns
C	Dynamic load capacity	N
C0	Static load capacity	N
vmax	Maximum permissible speed	m/min

Technical notes

technical illustration-R150245065-Single nut with flange FEM-E-C, size 40 x 12R x 6 - 4

1)	Lube port at flange center (lube port machining: Flat surface L3 ≤ 15 mm, countersink L3 > 15 mm)
2)	Nut rework: Axial lube port

Dimensions

Size	d1	d2	D1	D5	Hole pattern	D6	D7	L	L3	L4	L9 1)	L10	S 2)	Sx
d0 x P x Dw - i	d1	d2	g6	D5	Hole pattern	D6	D7	L	L3	L4	L9 1)	L10	S 2)	Sx
d0 x P x Dw - i	mm	mm	mm	mm		mm	mm	mm	mm	mm	mm	mm	mm	mm
16 x 5R x 3 - 4	15	12.9	28	48	BB2	38	5.5	38	12	10	44	26	M6	4
16 x 10R x 3 - 3								45		16		33
16 x 16R x 3 - 3								61		20		49
20 x 5R x 3 - 4	19	16.9	36	58		47	6.6	40		10	51	28
20 x 10R x 3 - 4		16.9						60		16		48
20 x 20R x 3,5 - 3		16.7						77		25		65
25 x 5R x 3 - 4	24	21.9	40	62		51		45		10	55	33
25 x 10R x 3 - 4		21.9						64		16		52
25 x 25R x 3,5 - 3		21.4						95		30		83
32 x 5R x 3,5 - 4	31	28.4	50	80		65	9	48	13	10	71	35
32 x 10R x 3,969 - 5		27.9						77		16		64
32 x 20R x 3,969 - 3								84		25		71
32 x 32R x 3,969 - 3								120		40		107
40 x 5R x 3,5 - 5	39	36.4	63	93	BB1	78		54	15	10	81.5	39	M8x1	5
40 x 10R x 6 - 4	38	33.8						70		16		55
40 x 10R x 6 - 6								90		16		75
40 x 12R x 6 - 4								75		25		60
40 x 16R x 6 - 4								90				75
40 x 20R x 6 - 3								88				73
40 x 25R x 6 - 4								127		30		112
40 x 30R x 6 - 4								145		35		130
40 x 40R x 6 - 3								142		45		127
50 x 5R x 3,5 - 5	49	46.4	75	110		93	11	54		10	97.5	39
50 x 10R x 6 - 6	48	43.8						90	18	16		72
50 x 12R x 6 - 6								105		25		87
50 x 16R x 6 - 6								128				110
50 x 20R x 6,5 - 5		43.4						132				114
50 x 30R x 6,5 - 4								151		35		133
50 x 40R x 6,5 - 3								149		45		131
63 x 10R x 6 - 6	61	56.8	90	125		108		90	22	16	110	68
63 x 20R x 6,5 - 5		56.4	95	135		115	13.5	132		25	117.5	110
63 x 40R x 6,5 - 3		56.4	95	135		115		149		45	117.5	127
80 x 10R x 6,5 - 6	78	73.3	105	145		125		95		16	127.5	73
80 x 20R x 12,7 - 6	76	67	125	165		145		170	25	25	147.5	145
16 x 5L x 3 - 4	15	12.9	28	48	BB2	38	5.5	38	12	10	44	26	M6
20 x 5L x 3 - 4	19	16.9	36	58		47	6.6	40			51	28
25 x 5L x 3 - 4	24	21.9	40	62		51	6.6	45			55	33
32 x 5L x 3,5 - 4	31	28.4	50	80		65	9	48	13		71	35
40 x 5L x 3,5 - 5	39	36.4	63	93	BB1	78		54	15		81.5	39	M8x1
40 x 10L x 6 - 4	38	33.8	63	93	BB1	78		70	15	16	81.5	55	M8x1

1)	Flange type B (two flat surfaces) option available!
2)	Lube port machining: Flat surface L3 ≤ 15 mm, countersink L3 > 15 mm. With left-hand lead the lube port position mirrors its position with right-hand lead!

Legend

Symbol	Description
d0	Nominal diameter
P	Lead (R = right-hand, L = left-hand)
Dw	Ball diameter
i	Number of ball track turns

Calculation

Installation

Attention: When setting up applications, do not allow components to collide with the front lube unit.

Lubrication

Nut housing MGD

Steel nut housings MGD are designed for FEM-E-C, FDM-E-C, SEM-E-C and FED-E-B nuts

Catalog

Service

CAD data

Directives and standards

Required and supplementary documentation

For further instructions and information, please refer to the documentation for this product.

You can find PDF files of these documents on the Internet at www.boschrexroth.com/mediadirectory.

If you are unsure about using this product, please contact Bosch Rexroth.

Notes