BOSCH REXROTH
R150239063

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth FEM-E-B 32X32RX3969-3 (R150239063) is a high-precision ball screw assembly designed for linear motion applications. This single nut with flange FEMEB, size 32x32x3969, is engineered to offer reliable performance with its standard seal and standard axial clearance. It features a nominal diameter (d), lead (P) that is right-handed, and a ball diameter (Dw). The number of ball track turns (i) and mounting dimensions are similar to DIN 69051, Part 5 flange type B. This screw drive nut is equipped with seals and comes in both right-hand and left-hand versions for specific applications. It offers various preload classes including C0, C1, C2, C3, and C5 to accommodate different requirements for rigidity and precision. The tolerance grade is set at T3 for sizes as per the product overview for screws. The FEM-E-B series boasts a size D, L with tolerance of ±0.023 mm and can operate within a temperature range of -10°C to +80°C. The maximum permissible linear speed (vmax) is defined by the lead of the screw. Its dynamic load capacity (C) and static load rating (C0) are validated for tolerance grades T3 and T7 only; correction factors must be considered for other tolerance grades. This product falls under Category A with an operating temperature range from -10°C to +80°C. The maximum operating temperature should not exceed peaks of 100°C as measured on the outer shell of the nut. Its design incorporates a hole pattern BB with size SxSxL specified. Lastly, the FEM-E-B 32X32RX3969-3 has a weight of approximately 1 kg and supports a nominal size of 32x32x3969 mm, making it suitable for various industrial applications where precision linear movement is critical.