BOSCH REXROTH
R132071200
$0.63 USD
- BOSCH REXROTH
- Material:R132071200
- Model:PLAIN BEARING &
Quantity in stock: 0
The Bosch Rexroth PLAIN BEARING (R132071200) is a high-quality plastic plain bearing designed for precision and durability. This particular model is part of the R.. series, featuring two flanges with differing diameters that facilitate secure mounting within sheet metal shields. The design allows for a maximum sheet thickness accommodation, ensuring a snug and stable fit within the bearing plates. This plain bearing's outer diameter and size are meticulously crafted to meet specific application requirements, providing a reliable solution for various mechanical assemblies. It boasts an impressive static load rating, which indicates its ability to withstand substantial stationary forces without experiencing deformation or failure. The product's weight is carefully balanced to contribute to the overall efficiency of the machinery in which it is installed. One of the key features of this model is its compensation gap. This gap, located in the longitudinal direction of the flange, serves multiple purposes: it compensates for potential dimensional deviations caused by moisture absorption or temperature fluctuations; it conserves lubricant in applications where lubrication is necessary; and it aids in distributing lubricant throughout the bearing during operation. The Bosch Rexroth PLAIN BEARING exemplifies engineering precision and adaptability, making it suitable for a wide range of applications where secure mounting and consistent performance are essential. Its thoughtful design elements ensure that it not only meets but exceeds expectations in terms of functionality and longevity.
Plastic plain bearings – size 12
Type R13207..00 is equipped with two flanges with different diameters. This type is specially designed for mounting in sheet metal shields up to a maximum thickness of 2 mm, ensuring the secure fit of the plastic plain bearings in the bearing plates.
Unpacked Weight: 0.000201 kg
Type R13207..00 is equipped with two flanges with different diameters. This type is specially designed for mounting in sheet metal shields up to a maximum thickness of 2 mm, ensuring the secure fit of the plastic plain bearings in the bearing plates.
Compensation gap
The flange is provided with a compensating gap “A” in the longitudinal direction. This almost compensates for dimensional deviations that occur as a result of moisture absorption or temperature changes, saves lubricant in lubricated bearings, and contributes to its distribution in the bearing.
| Data Sheet | Download Data Sheet |
| Productgroup ID | 17 |
| Outer diameter D | 17 |
| Size d | 12 |
| Size D | 17 |
| Size D1 | 14.4 |
| Size I | 2 |
| Static load rating C0 | 335 |
| Size s | 0.8 |
| Weight | 0.000201 |
| Nominal size | 12 |
Permissible p • v-values [N/cm2 • m/s]
|
d |
Dry running |
One-time grease lubrication |
Continuous grease lubrication |
|
mm |
|||
| 3 | 37 | 110 | 150 |
| 4 | |||
| 5 | |||
| 6 | |||
| 8 | 35 | 100 | 135 |
| 10 | |||
| 12 |
Permissible p ∙ v-values for an ambient temperature of 20°C
From the following diagram, the specific bearing pressures p in N/cm2 can be read for the peripheral speeds depending on the permissible p ∙ v value. For static loading capacity, a specific bearing pressure of p = 1400 N/cm2 is selected.
Radial load capacity
|
d |
mm |
3 | 4 | 5 | 6 | 8 | 10 | 12 | |
|
Static load capacity |
N |
85 | 112 | 140 | 168 | 225 | 280 | 335 | |
|
50 min–1 |
Dry running |
N |
85 | 112 | 140 | 168 | 225 | 265 | |
|
One-time grease lubrication |
N |
85 | 112 | 140 | 168 | 225 | 280 | 335 | |
|
Continuous grease lubrication |
N |
85 | 112 | 140 | 168 | 225 | 280 | 335 | |
|
100 min–1 |
Dry running |
N |
85 | 112 | 140 | 143 | 133 | ||
|
One-time grease lubrication |
N |
85 | 112 | 140 | 168 | 225 | 280 | 335 | |
|
Continuous grease lubrication |
N |
85 | 112 | 140 | 168 | 225 | 280 | 335 | |
|
250 min–1 |
Dry running |
N |
57 | 53 | |||||
|
One-time grease lubrication |
N |
85 | 112 | 140 | 166 | 154 | |||
|
Continuous grease lubrication |
N |
85 | 112 | 140 | 168 | 205 | |||
| The axial load which can be absorbed by the collar must not exceed 25 % of the radial load capacity; for this, shaft collar diameter must correspond to dimension "D" (see dimensions). | |
| The specified values are valid for a bearing temperature ≤ 80 °C and an ambient temperature of 20 °C. |
Technical data
Dimensions
|
d |
D |
D1 |
I |
s |
Tolerance for s |
s1 |
Tolerance for s1 |
|
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
| 3 | 6 | 4.8 | 2 | 0.6 |
0 - 0.06 |
0.6 |
0 - 0.06 |
| 4 | 7 | 5.9 | |||||
| 5 | 8 | 6.8 | |||||
| 6 | 11 | 7.8 | |||||
| 8 | 13 | 10.4 | 0.8 | 0.8 | |||
| 10 | 15 | 12.4 | |||||
| 12 | 17 | 14.4 |
0 - 0.07 |
▶ When mounting this type, be sure that the large flange comes to the side upon which the occurring axial forces are applied. The compensating gap “A” allows the plastic plain bearings to be compressed until the small flange can be easily rotated through the receiving bore in the bearing plate. For this, not that the gap points upwards during assembly and the left end is inserted first into the receiving bore. With a clockwise rotation, the plastic plain bearing pulls itself into the bore. If the assembly has been done properly, plastic plain bearings spring up again and are seated properly.
Mounting