BOSCH REXROTH
R109821688
$1,035.76 USD
- BOSCH REXROTH
- Material:R109821688
- Model:LSADR1-16-WV-2000
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSADR1-16-WV-2000 (R109821688) is a high-quality linear motion set designed for precision applications where torque resistance and stability against cocking loads are essential. This linear set is constructed from aluminum, making it lightweight yet robust, and comes with a precision steel shaft that includes one ball guide groove for smooth motion. The included torqueresistant linear bushing, paired with hardened steel bearing plates, ensures zero clearance from the factory, optimizing performance. The LSADR1-16-WV-2000 is equipped with external seals and is relubricatable, which extends the service life of the system by allowing for maintenance and protection against contamination. The product is capable of handling dynamic load capacities as indicated by minimal values due to varying load directions. It operates efficiently within a permissible ambient temperature range and can withstand maximum accelerations without compromise to its integrity. Additionally, this linear set boasts impressive load capacities both in terms of static and dynamic loads as well as dynamic torsional moment load capacity. These specifications make it suitable for various demanding applications where precise linear movement is required. The size and weight specifications are optimized to ensure that the product can be integrated into different systems without adding unnecessary bulk. Overall, the Bosch Rexroth LINEAR-SET LSADR1-16-WV-2000 provides reliable performance for systems requiring precise linear guidance with torque resistance capabilities. Its robust design and ability to maintain zero clearance make it an excellent choice for a wide array of industrial applications.
Linear set (aluminum), DR1-16-WV-2000, without seal
Linear set (aluminum)
1 torque-resistant LB
Ball guide grooves = 1
Shaft diameter d = 16
Shaft included
2000 = standard length as per table
Without seal
Version: Standard
Unpacked Weight: 0.1 kg
| Lightweight precision tandem housing (aluminum) |
| Precision steel shaft with one ball guide groove |
| torque-resistant linear bushing |
| Torque-transmitting, hardened steel bearing plates set to zero clearance ex works |
| Stability against cocking loads |
| External seals |
| Relubricatable |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Series | Torque |
| Size E1 | 30 |
| Footnote dynamic load capacity C | The load capacities indicated are minimal values as the direction of loading cannot always be clearly defined. |
| Size N | 12 |
| Size H | 22 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 26 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 26 |
| Mass m (kg/m) | 1.57 |
| Footnote static load capacity C0 | The load capacities indicated are minimal values as the direction of loading cannot always be clearly defined. |
| Static load rating C0 | 530 |
| Dynamic torsional moment load capacity Mt | 3.3 |
| Productgroup ID | 17 |
| Standard length l of the shaft footnote | R.... ... 85: l = 900 mm, R.... ... 87: l = 1200 mm, R.... ... 88: l = 2000 mm |
| Permissible ambient temperature (max) | |
| Size E2 | 36 |
| Permissible ambient temperature (min) | |
| Size S | 5.3 |
| Shaft diameter d | 16 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Dynamic load capacity C | 780 |
| Size L | 44 |
| Size B | 50 |
| Weight | 0.1 |
| Size D1 with tolerance | |
| Size H1 | 42 |
General technical data
|
Ø d |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | ||||||
|
vmax |
m/s |
3 | ||||||
|
m |
kg |
0.15 | 0.22 | 0.42 | 0.7 | 1.1 | 2.1 | 3.5 |
|
m (shaft) |
kg/m |
0.89 | 1.57 | 2.45 | 3.8 | 5.5 | 9.8 | 15.3 |
|
Operating conditions |
||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | |||||||
Load capacities and load moments
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
640 | 780 | 1550 | 3030 | 3680 | 6320 | 9250 |
|
C0 1) |
N |
420 | 530 | 1050 | 2180 | 2790 | 4350 | 6470 |
|
Mt |
Nm |
2 | 3.3 | 7.5 | 15 | 23 | 53 | 103 |
| 1) | The load ratings indicated are minimal values as the load direction cannot always be clearly defined. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
m |
Mass |
kg |
|
m (shaft) |
Weight (shaft) |
kg/m |
|
Mt |
Dynamic torsional moment load capacity |
Nm |
|
vmax |
Maximum permissible speed |
m/s |
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the torque-resistant Linear Bushing. The dynamic load ratings C in the tables must therefore be multiplied by the factor fs .
| 1) | fs = factor |
| 2) | s = movement path |
Service life, shaft straightness, stabilized installation
Definition of dynamic load ratings
| a) | Lubricating hole sealed with plastic cap |
| M6 when d ≤ 20 | |
| M8x1 when d ≥ 25 |
Dimensions
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
D |
mm |
22 | 26 | 32 | 40 | 47 | 62 | 75 |
|
B |
mm |
42 | 50 | 60 | 74 | 84 | 108 | 130 |
|
E1 |
mm |
28 | 30 | 39 | 48 | 58 | 64 | 84 |
|
E2 |
mm |
30 | 36 | 44 | 54 | 62 | 80 | 100 |
|
H |
mm |
18 | 22 | 25 | 30 | 35 | 45 | 50 |
|
Tolerance for H 1) |
µm |
+ 13 - 22 |
||||||
|
H1 |
mm |
35 | 42 | 50 | 60 | 70 | 90 | 105 |
|
H2 |
mm |
8.5 | 10 | 11 | 15.5 | 16.5 | 18.5 | 22.5 |
|
L |
mm |
40 | 44 | 55 | 68 | 80 | 92 | 114 |
|
l 2) |
mm |
400 | 500 | 600 | ||||
|
N |
mm |
12 | 15 | 18 | 20 | |||
|
S 3) |
mm |
5.3 | 6.6 | 8.4 | 10.5 | 13.5 | ||
|
S1 |
M6 | M8 | M10 | M12 | M16 | |||
| 1) | Two or more Linear Sets on one shaft are machined to the same dimension H while installed. Dimension H is reduced by 0.5 mm. |
| 2) | R.... ... 85: l = 900 mm, R.... ... 87: l = 1200 mm, R.... ... 88: l = 2000 mm |
| 3) | Fixing screws ISO 4762-8.8 |
Initial lubrication
Torque-resistant Linear Bushings do not come with initial lubrication. Grease Linear Bushings before use, see "Initial lubrication" in the "Lubrication" section.
Service life data is based on initial lubrication and relubricated Linear Bushings.
Lubricating a Linear Set with a torque-resistant compact Linear Bushing: on-shaft via Ø = 3.9 lubricating hole until lubricant seeps out. Lubricating a tandem Linear Set: on-shaft via recirculating lubricating groove in middle of outer diameter until lubricant seeps out. Lubricating a flanged Linear Set: on-shaft via funnel-type lube nipple recessed on the end face until lubricant seeps out.
Wiper seals for Torque-resistant Linear Bushings, type 1
Wiper seals for Torque-resistant Linear Bushings, type 1
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Hydraulic-type lube nipple according to DIN 71412 Form A
Hydraulic-type lube nipple according to DIN 71412 Form A
Catalog
Instructions
Service
Funnel-type lube nipple according to DIN 3405 Form A
Funnel-type lube nipple according to DIN 3405 Form A
Catalog
Instructions
Service