BOSCH REXROTH
R108363020
$427.83 USD
- BOSCH REXROTH
- Material:R108363020
- Model:LSAFT-A-30-DD
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSAFT-A-30-DD (R108363020) is a high-quality linear motion set designed for precision applications. This product features a lightweight flanged housing made from aluminum and incorporates two super linear bushings A, ensuring smooth and accurate movement. The tandem arrangement of the bushings provides enhanced load-bearing capacity and stability. Equipped with two external seals, the LINEAR-SET LSAFT-A-30-DD offers protection against contaminants, which is vital for maintaining performance in various environments. The shaft diameter 'd' allows for compatibility with corresponding components, while the spigot and threaded bottom area facilitate easy and secure mounting. This linear set is relubricatable, which extends its service life by allowing for maintenance and the application of fresh lubricant when necessary. Although the radial clearance is not adjustable, this model is designed to deliver consistent performance under standard operating conditions. With a dynamic load capacity C that reflects the unit's ability to handle equal load across both bushings, this linear set can withstand significant forces during operation. It also has a static longitudinal moment load capacity ML that indicates its strength against static forces. The LINEAR-SET's maximum permissible linear speed vmax highlights its capability to operate at high speeds, although it should be noted that excessive speeds can lead to increased wear on plastic components. The product's permissible ambient temperature range ensures it can function effectively within specified environmental conditions without compromising integrity or performance. Weighing in at . kg, this unit strikes a balance between robustness and ease of handling. Overall, the Bosch Rexroth LINEAR-SET LSAFT-A-30-DD is designed for users requiring a reliable and precise linear motion solution that can be integrated into diverse applications without sacrificing performance or durability.
Linear set (aluminum), FT-A-30, with two seals
Linear set (aluminum)
Tandem, flange
With super LB A
Shaft diameter d = 30
With two seals
Version: Standard
Unpacked Weight: 1.429 kg
This modular unit complements the Linear Set series and is used for designs with a vertical shaft.
| Precision lightweight flanged housing (aluminum) |
| Two super linear bushings A |
| Two external seals |
| Spigot |
| Thread for bolting from bottom area |
| Relubricatable |
| Radial clearance not adjustable |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 10 |
| Series | Super A (with self-alignment feature) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size E1 | 64 |
| Footnote dynamic load capacity C | Load capacity when both linear bushings are under equal load. |
| Size H | 70 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 47 |
| Size H3 | 37 |
| Breakaway force | 6 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 47 |
| Size D3 | 61 |
| Footnote static load capacity C0 | Load capacity when both linear bushings are under equal load. |
| Size N1 | 34 |
| Static load rating C0 | 5580 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Friction force | 2.5 |
| Productgroup ID | 17 |
| Size N2 | 74 |
| Permissible ambient temperature (max) | |
| Size D2 g7 | 61 |
| Size E2 | 50 |
| Dynamic longitudinal moment load capacity ML | 289 |
| Permissible ambient temperature (min) | |
| Size S | 13.5 |
| Size L1 | 82 |
| Shaft diameter d | 30 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | FT – Flanged, tandem |
| Dynamic load capacity C | 7800 |
| Static longitudinal moment load capacity ML0 | 206 |
| Size L | 152 |
| Size B | 84 |
| Weight | 1.429 |
| Size D1 with tolerance |
General technical data
|
Ø d |
mm |
12 | 16 | 20 | 25 | 30 |
|
amax |
m/s² |
150 | ||||
|
vmax 1) |
m/s |
3 | ||||
|
m |
kg |
0.2 | 0.32 | 0.55 | 1 | 1.5 |
|
FR 2) |
N |
0.8 | 1 | 1.5 | 2 | 2.5 |
|
Breakaway force |
N |
1.5 | 2 | 3 | 4.5 | 6 |
|
Shaft radial clearance h6 |
µm |
+ 38 + 10 |
+ 43 + 11 |
|||
|
Operating conditions |
||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | |||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
Load capacities and load moments
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 |
|
C 1) |
N |
1350 | 1660 | 3280 | 6420 | 7800 |
|
C0 1) |
N |
840 | 1060 | 2100 | 4360 | 5580 |
|
ML |
Nm |
26 | 35 | 84 | 205 | 289 |
|
ML0 |
Nm |
16 | 22 | 54 | 140 | 206 |
| 1) | Load rating when both Linear Bushings are under equal load. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
ML |
Dynamic longitudinal moment load capacity |
Nm |
|
ML0 |
Static longitudinal moment load capacity |
Nm |
|
vmax |
Maximum permissible speed |
m/s |
Impact of load direction on load rating of closed Linear Bushings
The listed load ratings should be chosen depending on installation in minimum or maximum position and should be based on the calculations. If the load direction is clearly defined and the Linear Bushings can be installed in maximum position, the load ratings Cmax. (dynamic load rating) and C0 max (static load rating) can be used. If aligned installation is not possible or the load direction is not defined, the minimum load ratings must be used.
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
| 1) | fs = factor |
| 2) | s = movement path |
Reduced load capacity with high load
If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.
Definition of dynamic load ratings
Self-alignment feature
The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).
Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.
| FR = Frictional drag | |
| s = travel distance | |
| v = travel speed | |
| a) | Super Linear Bushing, A Ød 20 |
| b) | Conventional Linear Bushing, Ød 20 |
| a) | Lubricating hole M8 x 1 sealed with plastic cap |
| b) | Vent hole |
| c) | Mounting options |
| d) | Via drill hole S |
| e) | Via thread S1 |
| f) | Via drill hole S |
| g) | Centering via collar D2 |
Dimensions
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | |
|
D |
mm |
22 | 26 | 32 | 40 | 47 | |
|
B |
mm |
42 | 50 | 60 | 74 | 84 | |
|
D2 1) |
g7 |
mm |
30 | 35 | 42 | 52 | 61 |
|
D3 |
mm |
30 | 35 | 42 | 52 | 61 | |
|
Tolerance for D3 |
µm |
- 100 - 300 |
|||||
|
E1 |
32 mm ±0.15 | 38 mm ±0.15 | 45 mm ±0.15 | 56 mm ±0.15 | 64 mm ±0.15 | ||
|
E2 |
24 mm ±0.15 | 28 mm ±0.15 | 35 mm ±0.15 | 42 mm ±0.15 | 50 mm ±0.15 | ||
|
H |
mm |
34 | 40 | 50 | 60 | 70 | |
|
H3 |
mm |
19 | 22 | 27 | 32 | 37 | |
|
L |
mm |
76 | 84 | 104 | 130 | 152 | |
|
L1 |
mm |
46 | 50 | 60 | 73 | 82 | |
|
L1 |
46 mm | 50 mm | 60 mm | 73 mm | 82 mm | ||
|
N1 |
mm |
13 | 18 | 22 | 26 | 34 | |
|
N2 |
mm |
36 | 40 | 50 | 63 | 74 | |
|
S 2) |
mm |
5.3 | 6.6 | 8.4 | 10.5 | 13.5 | |
|
S1 |
M6 | M8 | M10 | M12 | M16 | ||
|
V |
mm |
10 | |||||
| 1) | Recommended installation: Mounting hole D2H7. |
| 2) | Fixing screws ISO 4762-8.8 |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.
Vertical dimension
The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.
Bolts
We recommend bolts in accordance with ISO 4762-8.8 for fastening the Linear Sets.
Lubrication
On-shaft relubrication on relubricatable Linear Bushing only until lubricant seeps out.
General mounting instructions
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Metal cases for Super Linear Bushings and standard Linear Bushings
Metal cases for Super Linear Bushings and standard Linear Bushings
Galvanized steelCatalog
Instructions
Service
CAD data
Hydraulic-type lube nipple according to DIN 71412 Form A
Hydraulic-type lube nipple according to DIN 71412 Form A
Catalog
Instructions
Service
Funnel-type lube nipple according to DIN 3405 Form A
Funnel-type lube nipple according to DIN 3405 Form A
Catalog
Instructions
Service