BOSCH REXROTH
R106884040
$307.01 USD
- BOSCH REXROTH
- Material:R106884040
- Model:LSGOE-B-40-DD
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSGOE-B-40-DD (R106884040) is a high-precision linear motion set designed for a wide range of applications requiring precise and smooth linear movement. This set includes an open, adjustable steel linear set with a shaft diameter "d," complemented by two integrated wiper seals to protect against contaminants while maintaining lubrication. The precision housing is made from spheroidal graphite cast iron, ensuring durability and stability. The LINEAR-SET LSGOE-B-40-DD features a super linear bushing 'B' that does not have a self-alignment feature, which requires precise alignment during installation but offers reduced frictional drags. This model is secured with a locating screw and is noted for its standard precision. The dynamic load capacity 'C' indicates the set's ability to handle loads in the main direction of loading, while the static load rating 'C' provides insight into the maximum stationary load it can sustain. With a maximum acceleration 'amax,' this linear set can operate within an ambient temperature range of 'C' to 'C'. It has an outer diameter 'D,' and the breakaway force and maximum permissible linear speed 'vmax' are specified for optimal performance. Notably, this product can reach speeds of up to 'ms' with the caveat that service life may be limited due to increased wear on plastic parts. The LINEAR-SET LSGOE-B-40-DD is also equipped with an adjusting screw for radial clearance adjustments, arriving clamped to the h shaft lower limit and pre-set to zero-clearance for immediate use without additional setup. Its weight of '.' kg makes it suitable for various installations without adding significant mass. This product serves as an integral component in systems requiring reliable, high-performance linear guidance.
Linear set (steel), OE-B-40, with two seals
Linear set (steel)
Open, adjustable
With super LB B
Shaft diameter d = 40
With two seals
Version: Standard
Unpacked Weight: 1.997 kg
For zero-clearance or preloaded guides. Adjusting screw for adjusting radial clearance. These Linear Sets come set to zero clearance.
| Precision housing (spheroidal graphite cast iron/steel) |
| super linear bushing B without self-alignment feature |
| Integrated wiper seals |
| Secured with locating screw |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 12 |
| Series | Super B (no self-alignment feature) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size B1 (linear bushing) | 56 |
| Size E1 | 86 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. |
| Size H | 45 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 62 |
| Breakaway force | 8 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 62 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. |
| Static load rating C0 | 4480 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Friction force | 3 |
| Size A | 108 |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero-clearance |
| Productgroup ID | 17 |
| Size W | 19.5 |
| Permissible ambient temperature (max) | |
| Size E2 | 58 |
| Angle α | 56 |
| Size SW | 4 |
| Permissible ambient temperature (min) | |
| Size S | 9 |
| Shaft diameter d | 40 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | OE – Open, adjustable |
| Dynamic load capacity C | 8620 |
| Size L | 80 |
| Size B | 78 |
| Weight | 1.997 |
| Size D1 with tolerance |
General technical data
|
Ø d |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | ||||||
|
vmax 1) |
m/s |
3 | ||||||
|
m |
kg |
0.12 | 0.2 | 0.36 | 0.69 | 1.02 | 2.02 | 2.71 |
|
FR 2) |
N |
0.8 | 1 | 1.5 | 2 | 2.5 | 3 | 4 |
|
Breakaway force |
N |
1.5 | 2 | 3 | 4.5 | 6 | 8 | 10 |
|
Radial clearance |
Comes clamped to h5 shaft (lower limit) and set to zero clearance | |||||||
|
Operating conditions |
||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | |||||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
Load capacities and load moments
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
1060 | 1280 | 2570 | 5040 | 5020 | 8620 | 12500 |
|
C0 1) |
N |
510 | 630 | 1180 | 2470 | 2880 | 4480 | 6620 |
| 1) | The load ratings apply for the main direction of loading. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
vmax |
Maximum permissible speed |
m/s |
For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).
Impact of load direction on load rating of open Linear Bushings
The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).
Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
| 1) | fs = factor |
| 2) | s = movement path |
Definition of dynamic load ratings
Dimensions
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
D |
mm |
22 | 26 | 32 | 40 | 47 | 62 | 75 |
|
α |
° |
66 | 68 | 55 | 57 | 56 | 54 | |
|
A 1) |
mm |
42 | 50 | 60 | 74 | 84 | 108 | 130 |
|
B |
mm |
32 1) | 35 1) | 42 1) | 54 1) | 60 1) | 78 1) | 70 1) |
|
B1 |
mm |
20 | 22 | 28 | 40 | 48 | 56 | 72 |
|
E1 |
32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.15 | 60 mm ±0.15 | 68 mm ±0.2 | 86 mm ±0.2 | 108 mm ±0.2 | |
|
E2 |
23 mm ±0.15 | 26 mm ±0.15 | 32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.2 | 58 mm ±0.2 | 50 mm ±0.2 | |
|
H |
mm |
18 | 22 | 25 | 30 | 35 | 45 | 50 |
|
Tolerance for H 2) |
µm |
+ 8 - 16 |
+ 13 - 21 |
|||||
|
H2 1) |
mm |
28 | 35 | 42 | 51 | 60 | 77 | 88 |
|
L |
mm |
32 | 36 | 45 | 58 | 68 | 80 | 100 |
|
S |
mm |
4.5 | 5.5 | 6.6 | 9 | |||
|
SW |
mm |
2.5 | 3 | 4 | 5 | |||
|
V 1) |
mm |
5.5 | 6.5 | 8 | 9 | 10 | 12 | 14 |
|
W 3) |
mm |
6.5 | 9 | 11.5 | 14 | 19.5 | 22.5 | |
| 1) | Tolerance ISO 8062-3 - DCTG 9. |
| 2) | Clamped (fastened) in relation to Ø d. |
| 3) | Minimum size in relation to Ø d. |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.
Vertical dimension
The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.
Bolts
We recommend bolts in accordance with ISO 4762-8.8 for fastening the Linear Sets.
Lubrication
On-shaft relubrication on relubricatable Linear Bushing only until lubricant seeps out.
General mounting instructions
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Grooved taper pin
Grooved taper pin
Catalog
Instructions
Service
Locating screws for super linear bushings A and B
Locating screws for super linear bushings A and B
Locating screws are self-locking.Catalog
Instructions
Service