BOSCH REXROTH
R106781640
$110.70 USD
- BOSCH REXROTH
- Material:R106781640
- Model:LSSO-B-16-DD
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSSO-B-16-DD (R106781640) is a high-quality linear set made of steel, specifically designed for applications requiring precise linear motion. This model is part of the Super LB B series and features a standard precision housing made from spheroidal graphite cast iron and a steel super linear bushing B without a self-alignment feature. The product includes integrated wiper seals to protect against contaminants and is secured with a locating screw. With a shaft diameter of 'd,' the LINEAR-SET LSSO-B-16-DD ensures smooth operation with minimal friction force, as indicated in the footnote regarding frictional drags. These drags are influenced by speed and lubrication but do not impede performance when the bushing is not under radial load. The set's dynamic load capacity 'C' highlights its ability to handle significant loads in the main direction, while its static load rating 'C' assures stability and endurance under stationary forces. This linear set can accommodate a maximum acceleration 'amax' and operates efficiently within an ambient temperature range of -20°C to +80°C. It has been tested for total travel distances ranging from 100 km to 10,000 km without failure, ensuring long service life even at maximum permissible speeds of up to 5 m/s. However, it is important to note that such speeds may limit service life due to increased wear on plastic components. The outer diameter 'D,' breakaway force, and weight specifications further define this product's robustness and suitability for long guides that demand shaft support and high rigidity levels. The LINEAR-SET LSSO-B-16-DD is an optimal solution for those seeking reliable linear motion components in their mechanical systems.
Linear set (steel), O-B-16, with two seals
Linear set (steel)
Open
With super LB B
Shaft diameter d = 16
With two seals
Version: Standard
Unpacked Weight: 0.214 kg
For long guides requiring shaft support and a high level of rigidity.
| Precision housing (spheroidal graphite cast iron/steel) |
| super linear bushing B without self-alignment feature |
| Integrated wiper seals |
| Secured with locating screw |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 6.5 |
| Series | Super B (no self-alignment feature) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size B1 (linear bushing) | 22 |
| Size E1 | 40 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. |
| Size H | 22 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 26 |
| Breakaway force | 2 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 26 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. |
| Static load rating C0 | 630 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Friction force | 1 |
| Size A | 50 |
| Productgroup ID | 17 |
| Size W | 9 |
| Permissible ambient temperature (max) | |
| Size E2 | 26 |
| Angle α | 68 |
| Size SW | 2.5 |
| Permissible ambient temperature (min) | |
| Size S | 4.5 |
| Shaft diameter d | 16 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | O – Open |
| Dynamic load capacity C | 1280 |
| Size L | 36 |
| Size B | 35 |
| Weight | 0.214 |
| Size D1 with tolerance |
General technical data
|
Ø d |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | ||||||
|
vmax 1) |
km/h |
3 | ||||||
|
m |
kg |
0.13 | 0.2 | 0.36 | 0.7 | 1.05 | 2.05 | 2.77 |
|
FR 2) |
N |
0.8 | 1 | 1.5 | 2 | 2.5 | 3 | 4 |
|
Breakaway force |
N |
1.5 | 2 | 3 | 4.5 | 6 | 8 | 10 |
|
Shaft radial clearance h6 |
µm |
+ 28 + 1 |
+ 31 + 2 |
+ 35 + 3 |
||||
|
Operating conditions |
||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | |||||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
Load capacities and load moments
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
1060 | 1280 | 2570 | 5040 | 5020 | 8620 | 12500 |
|
C0 1) |
N |
510 | 630 | 1180 | 2470 | 2880 | 4480 | 6620 |
| 1) | The load ratings apply for the main direction of loading. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
vmax |
Maximum permissible speed |
m/s |
For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).
Impact of load direction on load rating of open Linear Bushings
The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).
Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
| 1) | fs = factor |
| 2) | s = movement path |
Definition of dynamic load ratings
Dimensions
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
D |
mm |
22 | 26 | 32 | 40 | 47 | 62 | 75 |
|
α |
° |
66 | 68 | 55 | 57 | 56 | 54 | |
|
A 1) |
mm |
42 | 50 | 60 | 74 | 84 | 108 | 130 |
|
B |
mm |
32 1) | 35 1) | 42 1) | 54 1) | 60 1) | 78 1) | 70 1) |
|
B1 |
mm |
20 | 22 | 28 | 40 | 48 | 56 | 72 |
|
E1 |
32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.15 | 60 mm ±0.15 | 68 mm ±0.2 | 86 mm ±0.2 | 108 mm ±0.2 | |
|
E2 |
23 mm ±0.15 | 26 mm ±0.15 | 32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.2 | 58 mm ±0.2 | 50 mm ±0.2 | |
|
H |
mm |
18 | 22 | 25 | 30 | 35 | 45 | 50 |
|
Tolerance for H 2) |
µm |
+ 8 - 16 |
+ 13 - 21 |
|||||
|
H2 1) |
mm |
28 | 35 | 42 | 51 | 60 | 77 | 88 |
|
L |
mm |
32 | 36 | 45 | 58 | 68 | 80 | 100 |
|
S |
mm |
4.5 | 5.5 | 6.6 | 9 | |||
|
SW |
mm |
2.5 | 3 | 4 | 5 | |||
|
V 1) |
mm |
5.5 | 6.5 | 8 | 9 | 10 | 12 | 14 |
|
W 3) |
mm |
6.5 | 9 | 11.5 | 14 | 19.5 | 22.5 | |
| 1) | Tolerance ISO 8062-3 - DCTG 9. |
| 2) | Clamped (fastened) in relation to Ø d. |
| 3) | Minimum size in relation to Ø d. |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.
Vertical dimension
The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.
Bolts
We recommend bolts in accordance with ISO 4762-8.8 for fastening the Linear Sets.
Lubrication
On-shaft relubrication on relubricatable Linear Bushing only until lubricant seeps out.
General mounting instructions
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Grooved taper pin
Grooved taper pin
Catalog
Instructions
Service
Locating screws for super linear bushings A and B
Locating screws for super linear bushings A and B
Locating screws are self-locking.Catalog
Instructions
Service