BOSCH REXROTH
R103863020

$198.48 USD

BOSCH REXROTH
Material:R103863020
Model:LSAOE-A-30-DD

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LINEAR-SET LSAOE-A-30-DD (R103863020) is a high-quality linear motion set designed for precision applications. This linear set features an aluminum housing that is both lightweight and durable, providing a stable and precise platform for linear movement. The set includes a super LB A linear bushing with self-alignment capabilities, ensuring smooth and accurate operation even under varying loads. It is equipped with two external seals to protect against contaminants, enhancing the longevity of the system. The LINEAR-SET LSAOE-A-30-DD offers exceptional performance characteristics, including a dynamic load capacity that ensures it can handle significant loads in the main direction of loading. The static load rating further contributes to its robustness in stationary applications. Designed for ease of maintenance, the system is relubricatable, which helps maintain optimal performance over time. With a shaft diameter of 'd' and an outer diameter 'D' specific to Size H, this linear set provides secure mounting thanks to its grooved taper pin design. It has been engineered to accommodate maximum accelerations and can operate within a wide range of ambient temperatures without compromising functionality. Notably, this product features low frictional drags due to its integrated wiper seals on two sides when not under radial load, allowing for efficient operation at various speeds and lubrication conditions. The breakaway force and maximum permissible linear speed are indicative of its capacity to handle high-speed applications with ease. This model from Bosch Rexroth also boasts an adjustable feature for zero-clearance or preloaded guides through an adjusting screw that fine-tunes radial clearance. These adjustments ensure precision alignment and minimize play within the system. Overall, the Bosch Rexroth LINEAR-SET LSAOE-A-30-DD is designed for users requiring precise control in their linear motion applications while benefiting from the durability and reliability offered by its robust construction and thoughtful engineering.

Linear set (aluminum), OE-A-30, with two seals

Linear set (aluminum)
Open, adjustable
With super LB A
Shaft diameter d = 30
With two seals
Version: Standard

Unpacked Weight: 0.87 kg

For zero-clearance or preloaded guides. Adjusting screw for adjusting radial clearance. These Linear Sets come set to zero clearance.

Lightweight precision housing (aluminum)
super linear bushing A with self-alignment feature
Secured by grooved taper pin
External seals
Relubricatable

Data Sheet	Download Data Sheet
2D CAD	Download 2D CAD
2D CAD	Download 2D CAD
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Size V	8
Series	Super A (with self-alignment feature)
Footnote friction force FR	Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
Size E1	68
Footnote dynamic load capacity C	The load capacities apply for the main direction of loading.
Size H	35
Max. acceleration amax	150
Permissible ambient temperature	-10 °C ... +80 °C
Outer diameter D	47
Size H3	11.5
Breakaway force	6
Size L3	16
Size H4	6
Maximum permissible linear speed vmax	3
Size D	47
Footnote static load capacity C0	The load capacities apply for the main direction of loading.
Size N1	34
Static load rating C0	2880
Size M	43.5
Note: Maximum permissible speed vmax	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Friction force	2.5
Size A	87
Radial clearance	Comes clamped to h5 shaft (lower limit) and set to zero-clearance
Productgroup ID	17
Size N2	22
Size W	14
Size E3	72
Permissible ambient temperature (max)	+80
Size E2	45
Size E4	30
Angle α	57
Size SW	3
Permissible ambient temperature (min)	-10
Size S	8.4
Shaft diameter d	30
Linear guide type	Linear bushing and shaft
Filter for linear bushings and shafts	Linear sets with linear bushings
Format of linear bushings	OE – Open, adjustable
Dynamic load capacity C	5020
Size L	79
Size S2	6
Weight	0.87
Size D1 with tolerance
Size H1	60

General technical data

Ø d	mm	12	16	20	25	30	40	50
amax	m/s²	150
vmax 1)	m/s	3
m	kg	0.11	0.17	0.3	0.57	0.86	1.6	2.6
FR 2)	N	0.8	1	1.5	2	2.5	3	4
Breakaway force	N	1.5	2	3	4.5	6	8	10
Radial clearance		Comes clamped to h5 shaft (lower limit) and set to zero clearance
Operating conditions
Permissible ambient temperature (min ... max)		-10 °C ... +80 °C

1)	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure.
2)	Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.

Load capacities and load moments

Ød	mm	12	16	20	25	30	40	50
C 1)	N	1060	1500	2570	5040	5020	8620	12500
C0 1)	N	510	830	1180	2470	2880	4480	6620

1)	The load ratings apply for the main direction of loading.
	The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26.

Legend

Symbol	Description	Unit
Ød	Shaft diameters	mm
amax	Maximum acceleration travel	m/s2
C	Dynamic load capacity	N
C0	Static load capacity	N
FR	Friction force	N
m	Mass	kg
vmax	Maximum permissible speed	m/s

For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).

Impact of load direction on load rating of open Linear Bushings

The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).

Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).

technical illustration-R103863020-Linear set (aluminum), OE-A-30, with two seals

1)	fs = factor
2)	s = movement path

Reduced load capacity with high load

If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.

Definition of dynamic load ratings

Self-alignment feature

The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).

Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.

	FR = Frictional drag
	s = travel distance
	v = travel speed

a)	Super Linear Bushing, A Ød 20
b)	Conventional Linear Bushing, Ød 20

a)	Lubricating hole sealed with plastic cap

Dimensions

Ød	mm	12	16	20	25	30	40	50
D	mm	22	26	32	40	47	62	75
α	°	66	68	55	57		56	54
A	mm	43	53	60	78	87	108	132
E1		32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	60 mm ±0.15	68 mm ±0.15	86 mm ±0.15	108 mm ±0.2
E2		23 mm ±0.15	26 mm ±0.15	32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	58 mm ±0.15	50 mm ±0.2
E3	mm	34	42	50	64	72	90	108
E4	mm	32	35	45	20	30	35	42
H	mm	18	22	25	30	35	45	50
Tolerance for H 1)	µm	+ 8 - 16
H1	mm	28	35	42	51	60	77	88
H3	mm	10				11.5	14	12.5
H4	mm	1.5	2.5	3.5	4	6
L	mm	39	43	54	67	79	91	113
L3	mm	10.5	11.5	13.5	15	16	18	22
M 1)		21.5 mm ±0.01	26.5 mm ±0.01	30 mm ±0.01	39 mm ±0.01	43.5 mm ±0.01	54 mm ±0.01	66 mm ±0.01
N1	mm	16.5	21	24	29	34	44	49
N2	mm	11	13	18	22		26	34
S 2)	mm	4.3	5.3	6.6	8.4		10.5	13.5
S1		M5	M6	M8	M10		M12	M16
S2 3)	mm	4		5	6		8	10
SW	mm	2.5			3		4	5
V	mm	5			6.5	8	10	12
W 4)	mm	6.5	9		11.5	14	19.5	22.5

1)	Clamped (fastened) in relation to Ø d.
2)	Fixing screws ISO 4762-8.8
3)	Pin hole centering.
4)	Minimum size in relation to Ø d.

Life expectancy calculation

Radial clearance

The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.

Vertical dimension

The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.