BOSCH REXROTH
R103782520

$157.53 USD

BOSCH REXROTH
Material:R103782520
Model:LSAO-B-25-DD

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LINEAR-SET LSAO-B-25-DD (R103782520) is a high-precision linear motion set designed to provide smooth and accurate linear movement in various applications. This linear set is constructed from lightweight precision aluminum, offering a sturdy yet efficient solution for motion control. It features a super LB B linear bushing that does not include a self-alignment feature, ensuring stable and precise movements without the potential for misalignment. The LINEAR-SET LSAO-B-25-DD comes with two external seals, enhancing its durability by protecting against contaminants and extending the product's service life. The shaft diameter 'd' accommodates appropriate sizing for specific applications, while the grooved taper pin secures the bushing in place, ensuring reliable performance. This product is designed for long guides that require shaft support and exhibit a high level of rigidity. It is capable of handling dynamic load capacities with ease, as indicated by its size-specific ratings. The static load rating C also reflects the set's ability to withstand loads without movement. With maximum permissible speeds of up to 5 m/s, it is suitable for high-speed applications, although service life may be limited at these speeds due to increased wear on plastic parts. The LINEAR-SET can operate within an ambient temperature range of -20°C to 80°C, allowing for use in various environmental conditions. Its breakaway force and maximum acceleration amax are indicative of its robust performance capabilities. Lastly, this product has been tested thoroughly to ensure reliability over long distances traveled, with tests showing total travel from 100 km to 10^5 km without failure. The inclusion of integrated wiper seals contributes to frictional drags which are dependent on speed and lubrication conditions but remain minimal under no radial load conditions. Overall, this linear set combines durability with precision engineering to meet demanding motion control requirements.

Linear set (aluminum), O-B-25, with two seals

Linear set (aluminum)
Open
With super LB B
Shaft diameter d = 25
With two seals
Version: Standard

Unpacked Weight: 0.585 kg

For long guides requiring shaft support and a high level of rigidity.

Lightweight precision housing (aluminum)
super linear bushing B without self-alignment feature
Secured by grooved taper pin
External seals
Relubricatable

Data Sheet	Download Data Sheet
2D CAD	Download 2D CAD
2D CAD	Download 2D CAD
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Size V	6.5
Footnote shaft radial clearance h6	Clamped (fastened).
Series	Super B (no self-alignment feature)
Footnote friction force FR	Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
Size E1	60
Footnote dynamic load capacity C	The load capacities apply for the main direction of loading.
Size H	30
Max. acceleration amax	150
Permissible ambient temperature	-10 °C ... +80 °C
Outer diameter D	40
Size H3	10
Breakaway force	4.5
Size L3	15
Size H4	4
Maximum permissible linear speed vmax	3
Size D	40
Footnote static load capacity C0	The load capacities apply for the main direction of loading.
Size N1	29
Static load rating C0	2250
Size M	39
Note: Maximum permissible speed vmax	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Friction force	2
Size A	78
Productgroup ID	17
Size N2	22
Size W	11.5
Size E3	64
Permissible ambient temperature (max)	+80
Size E2	40
Size E4	20
Angle α	57
Size SW	3
Permissible ambient temperature (min)	-10
Size S	8.4
Shaft diameter d	25
Linear guide type	Linear bushing and shaft
Filter for linear bushings and shafts	Linear sets with linear bushings
Format of linear bushings	O – Open
Dynamic load capacity C	4130
Size L	67
Size S2	6
Weight	0.585
Size D1 with tolerance
Size H1	51

General technical data

Ø d	mm	12	16	20	25	30	40	50
amax	m/s²	150
vmax 1)	m/s	3
m	kg	0.11	0.17	0.3	0.57	0.86	1.6	2.6
FR 2)	N	0.8	1	1.5	2	2.5	3	4
Breakaway force	N	1.5	2	3	4.5	6	8	10
Shaft radial clearance h6 3)	µm	+ 28 - 1		+ 31 - 2			+ 35 - 3
Operating conditions
Permissible ambient temperature (min ... max)		-10 °C ... +80 °C

1)	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure.
2)	Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
3)	Clamped (fastened).

Load capacities and load moments

Ød	mm	12	16	20	25	30	40	50
C 1)	N	1060	1500	2570	5040	5020	8620	12500
C0 1)	N	510	830	1180	2470	2880	4480	6620

1)	The load ratings apply for the main direction of loading.
	The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26.

Legend

Symbol	Description	Unit
Ød	Shaft diameters	mm
amax	Maximum acceleration travel	m/s2
C	Dynamic load capacity	N
C0	Static load capacity	N
FR	Friction force	N
m	Mass	kg
vmax	Maximum permissible speed	m/s

For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).

Impact of load direction on load rating of open Linear Bushings

The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).

Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).

Reduced load capacity with short stroke

In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .

technical illustration-R103782520-Linear set (aluminum), O-B-25, with two seals

1)	fs = factor
2)	s = movement path

Definition of dynamic load ratings

a)	Lubricating hole sealed with plastic cap

Dimensions

Ød	mm	12	16	20	25	30	40	50
D	mm	22	26	32	40	47	62	75
α	°	66	68	55	57		56	54
A	mm	43	53	60	78	87	108	132
E1		32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	60 mm ±0.15	68 mm ±0.15	86 mm ±0.15	108 mm ±0.2
E2		23 mm ±0.15	26 mm ±0.15	32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	58 mm ±0.15	50 mm ±0.2
E3	mm	34	42	50	64	72	90	108
E4	mm	32	35	45	20	30	35	42
H	mm	18	22	25	30	35	45	50
Tolerance for H 1)	µm	+ 8 - 16
H1	mm	28	35	42	51	60	77	88
H3	mm	10				11.5	14	12.5
H4	mm	1.5	2.5	3.5	4	6
L	mm	39	43	54	67	79	91	113
L3	mm	10.5	11.5	13.5	15	16	18	22
M 1)		21.5 mm ±0.01	26.5 mm ±0.01	30 mm ±0.01	39 mm ±0.01	43.5 mm ±0.01	54 mm ±0.01	66 mm ±0.01
N1	mm	16.5	21	24	29	34	44	49
N2	mm	11	13	18	22		26	34
S 2)	mm	4.3	5.3	6.6	8.4		10.5	13.5
S1		M5	M6	M8	M10		M12	M16
S2 3)	mm	4		5	6		8	10
SW	mm	2.5			3		4	5
V	mm	5			6.5	8	10	12
W 4)	mm	6.5	9		11.5	14	19.5	22.5

1)	Clamped (fastened) in relation to Ø d.
2)	Fixing screws ISO 4762-8.8
3)	Pin hole centering.
4)	Minimum size in relation to Ø d.

Life expectancy calculation

Radial clearance

The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.

Vertical dimension

The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.