BOSCH REXROTH
R103763020

$183.79 USD

BOSCH REXROTH
Material:R103763020
Model:LSAO-A-30-DD

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LINEAR-SET LSAO-A-30-DD (R103763020) is a high-precision linear motion set designed to provide smooth and accurate guidance in various applications. This set comprises an aluminum lightweight precision housing and a super linear bushing A with a self-alignment feature, which ensures reliable performance even under misaligned conditions. The shaft diameter 'd' is tailored for robustness, while the inclusion of two external seals offers protection against contaminants, enhancing the durability of the system. The LINEAR-SET LSAO-A-30-DD is characterized by its open design and ease of maintenance, with relubrication possible to extend service life. The standard version comes equipped with a grooved taper pin for secure fastening. The product operates efficiently within a permissible ambient temperature range, maintaining stability across various working environments. Dynamic load capacity and static load ratings are optimized for the main direction of loading, ensuring that the linear set can handle significant forces during operation. Additionally, it has been engineered to achieve maximum acceleration and speed parameters without compromising on performance or safety. The friction force associated with this model is minimal due to the integrated wiper seals on both sides, which also contribute to reducing drag when not under radial load. Tests have demonstrated impressive durability, with total travel ranging significantly without failure, making this linear set suitable for long guides that require continuous support and high rigidity. With a weight that strikes a balance between sturdiness and ease of handling, the Bosch Rexroth LINEAR-SET LSAO-A-30-DD represents an ideal solution for applications demanding precise linear motion control combined with long-term reliability.

Linear set (aluminum), O-A-30, with two seals

Linear set (aluminum)
Open
With super LB A
Shaft diameter d = 30
With two seals
Version: Standard

Unpacked Weight: 0.88 kg

For long guides requiring shaft support and a high level of rigidity.

Lightweight precision housing (aluminum)
super linear bushing A with self-alignment feature
Secured by grooved taper pin
External seals
Relubricatable

Data Sheet	Download Data Sheet
2D CAD	Download 2D CAD
2D CAD	Download 2D CAD
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Size V	8
Footnote shaft radial clearance h6	clamped (fastened)
Series	Super A (with self-alignment feature)
Footnote friction force FR	Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
Size E1	68
Footnote dynamic load capacity C	The load capacities apply for the main direction of loading.
Size H	35
Max. acceleration amax	150
Permissible ambient temperature	-10 °C ... +80 °C
Outer diameter D	47
Size H3	11.5
Breakaway force	6
Size L3	16
Size H4	6
Maximum permissible linear speed vmax	3
Size D	47
Footnote static load capacity C0	The load capacities apply for the main direction of loading.
Size N1	34
Static load rating C0	2880
Size M	43.5
Note: Maximum permissible speed vmax	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Friction force	2.5
Size A	87
Productgroup ID	17
Size N2	22
Size W	14
Size E3	72
Permissible ambient temperature (max)	+80
Size E2	45
Size E4	30
Angle α	57
Size SW	3
Permissible ambient temperature (min)	-10
Size S	8.4
Shaft diameter d	30
Linear guide type	Linear bushing and shaft
Filter for linear bushings and shafts	Linear sets with linear bushings
Format of linear bushings	O – Open
Dynamic load capacity C	5020
Size L	79
Size S2	6
Weight	0.88
Size D1 with tolerance
Size H1	60

General technical data

Ø d	mm	12	16	20	25	30	40	50
amax	m/s²	150
vmax 1)	m/s	3
m	kg	0.11	0.17	0.3	0.57	0.86	1.6	2.6
FR 2)	N	0.8	1	1.5	2	2.5	3	4
Breakaway force	N	1.5	2	3	4.5	6	8	10
Shaft radial clearance h6 3)	µm	+ 28 - 1		+ 31 - 2			+ 35 - 3
Operating conditions
Permissible ambient temperature (min ... max)		-10 °C ... +80 °C

1)	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure.
2)	Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
3)	Clamped (fastened).

Load capacities and load moments

Ød	mm	12	16	20	25	30	40	50
C 1)	N	1060	1500	2570	5040	5020	8620	12500
C0 1)	N	510	830	1180	2470	2880	4480	6620

1)	The load ratings apply for the main direction of loading.
	The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26.

Legend

Symbol	Description	Unit
Ød	Shaft diameters	mm
amax	Maximum acceleration travel	m/s2
C	Dynamic load capacity	N
C0	Static load capacity	N
FR	Friction force	N
m	Mass	kg
vmax	Maximum permissible speed	m/s

For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).

Impact of load direction on load rating of open Linear Bushings

The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).

Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).

Reduced load capacity with short stroke

In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .

technical illustration-R103763020-Linear set (aluminum), O-A-30, with two seals

1)	fs = factor
2)	s = movement path

Reduced load capacity with high load

If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.

Definition of dynamic load ratings

Self-alignment feature

The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).

Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.

	FR = Frictional drag
	s = travel distance
	v = travel speed

a)	Super Linear Bushing, A Ød 20
b)	Conventional Linear Bushing, Ød 20

a)	Lubricating hole sealed with plastic cap

Dimensions

Ød	mm	12	16	20	25	30	40	50
D	mm	22	26	32	40	47	62	75
α	°	66	68	55	57		56	54
A	mm	43	53	60	78	87	108	132
E1		32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	60 mm ±0.15	68 mm ±0.15	86 mm ±0.15	108 mm ±0.2
E2		23 mm ±0.15	26 mm ±0.15	32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	58 mm ±0.15	50 mm ±0.2
E3	mm	34	42	50	64	72	90	108
E4	mm	32	35	45	20	30	35	42
H	mm	18	22	25	30	35	45	50
Tolerance for H 1)	µm	+ 8 - 16
H1	mm	28	35	42	51	60	77	88
H3	mm	10				11.5	14	12.5
H4	mm	1.5	2.5	3.5	4	6
L	mm	39	43	54	67	79	91	113
L3	mm	10.5	11.5	13.5	15	16	18	22
M 1)		21.5 mm ±0.01	26.5 mm ±0.01	30 mm ±0.01	39 mm ±0.01	43.5 mm ±0.01	54 mm ±0.01	66 mm ±0.01
N1	mm	16.5	21	24	29	34	44	49
N2	mm	11	13	18	22		26	34
S 2)	mm	4.3	5.3	6.6	8.4		10.5	13.5
S1		M5	M6	M8	M10		M12	M16
S2 3)	mm	4		5	6		8	10
SW	mm	2.5			3		4	5
V	mm	5			6.5	8	10	12
W 4)	mm	6.5	9		11.5	14	19.5	22.5

1)	Clamped (fastened) in relation to Ø d.
2)	Fixing screws ISO 4762-8.8
3)	Pin hole centering.
4)	Minimum size in relation to Ø d.

Life expectancy calculation

Radial clearance

The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.

Vertical dimension

The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.