BOSCH REXROTH
R103662520
$139.02 USD
- BOSCH REXROTH
- Material:R103662520
- Model:LSAE-A-25-DD
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSAE-A-25-DD (R103662520) is a high-quality linear motion product designed for precision applications. This linear set comprises an aluminum housing, a super linear bushing A with self-alignment features, and external seals. The adjustable unit is equipped with two seals to ensure protection against contaminants and to maintain lubrication, enhancing the product's longevity and performance. With a shaft diameter of 25 mm, the LINEAR-SET LSAE-A-25-DD offers standard lightweight precision in its construction. It is relubricatable, allowing for maintenance and extended service life. The dynamic load capacity C indicates that the set can handle significant loads in its main direction of loading; deviations from this direction require load capacities to be adjusted using specified factors. The product can withstand a maximum acceleration (amax) and operate efficiently within an ambient temperature range of -20°C to 80°C. It has been tested for total travel ranging from 100 km to 10,000 km without failure, showcasing its durability under motion. The friction force is minimized due to the integrated wiper seals on both sides, which also contribute to the set's low frictional drags when not under radial load. Additionally, the LINEAR-SET LSAE-A-25-DD features an adjustable mechanism for radial clearance that comes pre-set to zero-clearance or preloaded guides. This allows for customization based on specific application requirements while maintaining precise movement control. Its design ensures high performance with a breakaway force specified for size H and a maximum permissible linear speed (vmax) that allows speeds up to 5 m/s, although higher speeds may limit service life due to increased wear on plastic components. Overall, this linear set is ideal for applications requiring precise guidance and smooth motion with easy adjustability and reliable sealing against environmental factors. Its lightweight yet durable construction makes it suitable for various dynamic uses where alignment and low friction are critical.
Linear set (aluminum), E-A-25, with two seals
Linear set (aluminum)
Adjustable
With super LB A
Shaft diameter d = 25
With two seals
Version: Standard
Unpacked Weight: 0.66 kg
For zero-clearance or preloaded guides. Adjusting screw for adjusting radial clearance. These Linear Sets come set to zero clearance.
| Lightweight precision housing (aluminum) |
| super linear bushing A with self-alignment feature |
| External seals |
| Relubricatable |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 6.5 |
| Series | Super A (with self-alignment feature) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size E1 | 60 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. If the load direction is not the main direction of loading, the load capacities must be multiplied by the following factors: Ø d 10 to 16: ↩f = 0.82, f0 = 0.86 ↩Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| Size H | 30 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 40 |
| Size H3 | 10 |
| Breakaway force | 4.5 |
| Size L3 | 15 |
| Size H4 | 20 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 40 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. If the load direction is not the main direction of loading, the load capacities must be multiplied by the following factors: Ø d 10 to 16: ↩f = 0.82, f0 = 0.86 ↩Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| Size N1 | 29 |
| Static load rating C0 | 2790 |
| Size M | 39 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Friction force | 2 |
| Size A | 78 |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero-clearance |
| Productgroup ID | 17 |
| Size N2 | 22 |
| Size E3 | 64 |
| Permissible ambient temperature (max) | |
| Size E2 | 40 |
| Size E4 | 20 |
| Size SW | 5 |
| Permissible ambient temperature (min) | |
| Size S | 8.4 |
| Shaft diameter d | 25 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | E – Adjustable |
| Dynamic load capacity C | 4820 |
| Size L | 67 |
| Size S2 | 6 |
| Weight | 0.66 |
| Size D1 with tolerance | |
| Size H1 | 60 |
General technical data
|
Ø d |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | |||||||
|
vmax 1) |
m/s |
3 | |||||||
|
m |
kg |
0.1 | 0.13 | 0.2 | 0.34 | 0.65 | 0.97 | 1.8 | 3 |
|
FR 2) |
N |
0.5 | 0.8 | 1 | 1.5 | 2 | 2.5 | 3 | 4 |
|
Breakaway force |
N |
1 | 1.5 | 2 | 3 | 4.5 | 6 | 8 | 10 |
|
Radial clearance |
Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||||||||
|
Operating conditions |
|||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | ||||||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
Load capacities and load moments
|
Ød |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
730 | 1020 | 1250 | 2470 | 4820 | 5860 | 10070 | 14730 |
|
C0 1) |
N |
380 | 490 | 620 | 1340 | 2790 | 3570 | 5570 | 8280 |
| 1) | The load ratings apply for the main direction of loading. If the load direction is not the main direction of loading, the load ratings must be multiplied by the following factors: Ø d 10 to 16: f = 0.82, f0 = 0.86 Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
vmax |
Maximum permissible speed |
m/s |
Impact of load direction on load rating of closed Linear Bushings
The listed load ratings should be chosen depending on installation in minimum or maximum position and should be based on the calculations. If the load direction is clearly defined and the Linear Bushings can be installed in maximum position, the load ratings Cmax. (dynamic load rating) and C0 max (static load rating) can be used. If aligned installation is not possible or the load direction is not defined, the minimum load ratings must be used.
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
Reduced load capacity with high load
If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.
Definition of dynamic load ratings
Self-alignment feature
The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).
Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.
| FR = Frictional drag | |
| s = travel distance | |
| v = travel speed | |
| a) | Super Linear Bushing, A Ød 20 |
| b) | Conventional Linear Bushing, Ød 20 |
| a) | Lubricating hole sealed with plastic cap |
Dimensions
|
Ød |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
D |
mm |
19 | 22 | 26 | 32 | 40 | 47 | 62 | 75 |
|
A |
mm |
40 | 43 | 53 | 60 | 78 | 87 | 108 | 132 |
|
E1 |
29 mm ±0.15 | 32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.15 | 60 mm ±0.15 | 68 mm ±0.15 | 86 mm ±0.15 | 108 mm ±0.2 | |
|
E2 |
20 mm ±0.15 | 23 mm ±0.15 | 26 mm ±0.15 | 32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.15 | 58 mm ±0.15 | 50 mm ±0.2 | |
|
E3 |
mm |
31 | 34 | 42 | 50 | 64 | 72 | 90 | 108 |
|
E4 |
mm |
29 | 32 | 35 | 45 | 20 | 30 | 35 | 42 |
|
H |
mm |
16 | 18 | 22 | 25 | 30 | 35 | 45 | 50 |
|
Tolerance for H 1) |
µm |
+ 8 - 16 |
|||||||
|
H1 |
mm |
31.5 | 35 | 42 | 50 | 60 | 70 | 90 | 105 |
|
H3 |
mm |
10 | 11.5 | 14 | 12.5 | ||||
|
H4 |
mm |
10 | 13 | 16 | 20 | 22 | 28 | 37 | |
|
L |
mm |
36 | 39 | 43 | 54 | 67 | 79 | 91 | 113 |
|
L3 |
mm |
10.5 | 11.5 | 13.5 | 15 | 16 | 18 | 22 | |
|
M 1) |
20 mm ±0.01 | 21.5 mm ±0.01 | 26.5 mm ±0.01 | 30 mm ±0.01 | 39 mm ±0.01 | 43.5 mm ±0.01 | 54 mm ±0.01 | 66 mm ±0.01 | |
|
N1 |
mm |
15 | 16.5 | 21 | 24 | 29 | 34 | 44 | 49 |
|
N2 |
mm |
11 | 13 | 18 | 22 | 26 | 34 | ||
|
S 2) |
mm |
4.3 | 5.3 | 6.6 | 8.4 | 10.5 | 13.5 | ||
|
S1 |
M5 | M6 | M8 | M10 | M12 | M16 | |||
|
S2 3) |
mm |
4 | 5 | 6 | 8 | 10 | |||
|
SW |
mm |
2.5 | 3 | 4 | 5 | 6 | 8 | ||
|
V |
mm |
5 | 6.5 | 8 | 10 | 12 | |||
| 1) | Clamped (fastened) in relation to Ø d. |
| 2) | Fixing screws ISO 4762-8.8 |
| 3) | Pin hole centering. |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.
Vertical dimension
The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.
Bolts
We recommend bolts in accordance with ISO 4762-8.8 for fastening the Linear Sets.
Lubrication
On-shaft relubrication on relubricatable Linear Bushing only until lubricant seeps out.
General mounting instructions
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Metal cases for Super Linear Bushings and standard Linear Bushings
Metal cases for Super Linear Bushings and standard Linear Bushings
Galvanized steelCatalog
Instructions
Service
CAD data
Hydraulic-type lube nipple according to DIN 71412 Form A
Hydraulic-type lube nipple according to DIN 71412 Form A
Catalog
Instructions
Service
Funnel-type lube nipple according to DIN 3405 Form A
Funnel-type lube nipple according to DIN 3405 Form A
Catalog
Instructions
Service