BOSCH REXROTH
R103465020

$1,146.18 USD

BOSCH REXROTH
Material:R103465020
Model:LSATOE-A-50-DD

Quantity in stock: 0

Note: Sales tax, and shipping will be calculated at checkout.

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth LINEAR-SET LSATOE-A-50-DD (R103465020) is a high-quality linear motion product designed for precise and efficient movement in various applications. This linear set is constructed from lightweight precision aluminum and features a tandem, open, adjustable design with two super linear bushings A, known for their self-alignment feature. The model includes an external reference edge and seals that contribute to its durability and performance longevity. Equipped with two seals for added protection against contaminants, the LSATOE-A-50-DD ensures smooth operation even in demanding environments. Its relubricatable design allows for easy maintenance, which helps extend the product's service life. The set comes with a shaft diameter D, providing a sturdy base for linear motion. The dynamic load capacity C of this model indicates its ability to handle loads effectively when both linear bushings are under equal load. It also has a static load rating C that denotes its capacity to sustain loads without movement. The maximum permissible linear speed vmax showcases the unit's capability to operate at high speeds, while the breakaway force provides insight into the initial force required to start motion. With a max acceleration amax and a specified range of permissible ambient temperatures, this product can perform reliably under various operating conditions. Furthermore, it comes clamped to h shaft lower limit and is set to zero-clearance, ensuring precision alignment right out of the box. The LINEAR-SET LSATOE-A-50-DD is also available as a Linear Motion Slide, expanding its versatility in application use. Its dynamic longitudinal moment load capacity ML and static longitudinal moment load capacity ML indicate its robustness in handling forces during operation. With an emphasis on precision engineering and reliability, this Bosch Rexroth linear set is suited for applications requiring accurate and smooth linear motion.

Linear set (aluminum), TOE-A-50, with two seals

Linear set (aluminum)
Tandem, open, adjustable
With super LB A
Shaft diameter d = 50
With two seals
Version: Standard

Unpacked Weight: 5.207 kg

For zero-clearance or preloaded guides. Adjusting screw for adjusting radial clearance. These Linear Sets come set to zero clearance.

Lightweight precision tandem housing (aluminum)
Two super linear bushings A
Reference edge
External seals
Relubricatable
Also available as linear motion slide.

Data Sheet	Download Data Sheet
2D CAD	Download 2D CAD
2D CAD	Download 2D CAD
3D CAD	Download 3D CAD
3D CAD	Download 3D CAD
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual
Manual	Download Manual

Size V	12
Size E5	80
Series	Super A (with self-alignment feature)
Footnote friction force FR	Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.
Size B1 (linear bushing)	132
Footnote dynamic load capacity C	Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading.
Size H	50
Max. acceleration amax	150
Permissible ambient temperature	-10 °C ... +80 °C
Outer diameter D	75
Size H3	10
Breakaway force	10
Size H4	6
Maximum permissible linear speed vmax	3
Size D	75
Footnote static load capacity C0	Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading.
Static load rating C0	13240
Size M	66
Note: Maximum permissible speed vmax	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 10⁵ m to 100 • 10⁵ m without failure.
Size N3	35
Friction force	4
Radial clearance	Comes clamped to h5 shaft (lower limit) and set to zero-clearance
Productgroup ID	17
Size N2	49
Size W	22.5
Size E3	160
Permissible ambient temperature (max)	+80
Dynamic longitudinal moment load capacity ML	630
Size E4	108
Angle α	54
Size SW	5
Permissible ambient temperature (min)	-10
Size S4	10
Shaft diameter d	50
Linear guide type	Linear bushing and shaft
Filter for linear bushings and shafts	Linear sets with linear bushings
Format of linear bushings	TOE – Tandem, open, adjustable
Dynamic load capacity C	20300
Static longitudinal moment load capacity ML0	415
Size L	224
Size E6	108
Size S2	13.5
Weight	5.207
Size D1 with tolerance

General technical data

Ø d	mm	12	16	20	25	30	40	50
amax	m/s²	150
vmax 1)	m/s	3
m	kg	0.22	0.34	0.62	1.17	1.68	3.15	5.5
FR 2)	N	0.8	1	1.5	2	2.5	3	4
Breakaway force	N	1.5	2	3	4.5	6	8	10
Radial clearance		Comes clamped to h5 shaft (lower limit) and set to zero clearance
Operating conditions
Permissible ambient temperature (min ... max)		-10 °C ... +80 °C

1)	Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure.
2)	Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication.

Load capacities and load moments

Ød	mm	12	16	20	25	30	40	50
C 1)	N	1720	2430	4170	8180	8150	14000	20300
C0 1)	N	1020	1660	2360	4940	5760	8960	13240
ML	Nm	11	18	60	141	163	328	630
ML0	Nm	7	13	47	86	116	212	415

1)	Dynamic load rating when both Linear Bushings are under equal load. The dynamic load ratings apply for the main direction of loading.
	The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26.

Legend

Symbol	Description	Unit
Ød	Shaft diameters	mm
amax	Maximum acceleration travel	m/s2
C	Dynamic load capacity	N
C0	Static load capacity	N
FR	Friction force	N
m	Mass	kg
ML	Dynamic longitudinal moment load capacity	Nm
ML0	Static longitudinal moment load capacity	Nm
vmax	Maximum permissible speed	m/s

For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).

Impact of load direction on load rating of open Linear Bushings

The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).

Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).

Reduced load capacity with short stroke

In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .

technical illustration-R103465020-Linear set (aluminum), TOE-A-50, with two seals

1)	fs = factor
2)	s = movement path

Reduced load capacity with high load

If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.

Definition of dynamic load ratings

Self-alignment feature

The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).

Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.

	FR = Frictional drag
	s = travel distance
	v = travel speed

a)	Super Linear Bushing, A Ød 20
b)	Conventional Linear Bushing, Ød 20

a)	Lubricating hole M8 x 1 sealed with plastic cap

Dimensions

Ød	mm	12	16	20	25	30	40	50
D	mm	22	26	32	40	47	62	75
α	°	66	68	55	57		56	54
B1	mm	43	53	60	78	87	108	132
E3		56 mm ±0.15	64 mm ±0.15	76 mm ±0.15	94 mm ±0.15	106 mm ±0.15	124 mm ±0.15	160 mm ±0.2
E4		32 mm ±0.15	40 mm ±0.15	45 mm ±0.15	60 mm ±0.15	68 mm ±0.15	86 mm ±0.15	108 mm ±0.2
E5	mm	24	28	32	42	52	60	80
E6	mm	34	42	50	64	72	90	108
H	mm	18	22	25	30	35	45	50
Tolerance for H 1)	µm	+ 8 - 16
H2	mm	28	35	42	51	60	77	88
H3	mm	10	12	13	15	16	20	10
H4	mm	1.5	2.5	3.5	4	6
L	mm	76	84	104	130	152	176	224
M 1)		21.5 mm ±0.01	26.5 mm ±0.01	30 mm ±0.01	39 mm ±0.01	43.5 mm ±0.01	54 mm ±0.01	66 mm ±0.01
N2	mm	16.5	21	24	29	34	44	49
N3	mm	11	13	18	22		26	35
S2 2)	mm	4.3	5.3	6.6	8.4		10.5	13.5
S3		M5	M6	M8	M10		M12	M16
S4 3)	mm	4		5	6		8	10
SW	mm	2.5			3		4	5
V	mm	5			6.5	8	10	12
W 4)	mm	6.5	9		11.5	14	19.5	22.5

1)	Clamped (fastened) in relation to Ø d.
2)	Fixing screws ISO 4762-8.8
3)	Pin hole centering.
4)	Minimum size in relation to Ø d.

Life expectancy calculation

Radial clearance

The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.

Vertical dimension

The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.