BOSCH REXROTH
R103261620
$244.79 USD
- BOSCH REXROTH
- Material:R103261620
- Model:LSATE-A-16-DD
Quantity in stock: 0
The Bosch Rexroth LINEAR-SET LSATE-A-16-DD (R103261620) is a high-precision linear motion product designed to provide smooth and accurate linear movement in various applications. This linear set is constructed from lightweight aluminum and includes two super linear bushings A, which are known for their self-alignment feature and high load capacities. The tandem, adjustable design ensures flexibility and ease of use, while the standard version comes with a reference edge and external seals for added protection against contaminants. The LSATE-A-16-DD has been engineered with relubrication capabilities to maintain optimal performance over time. The shaft diameter 'd' is crafted to accommodate specific requirements, and the set comes with two seals to ensure long-lasting operation even in demanding environments. The friction force FR indicates the minimal resistance offered by the integrated wiper seals when no radial load is present, which varies depending on speed and lubrication conditions. Dynamic load capacity C highlights the product's ability to handle loads when both linear bushings are equally loaded, ensuring reliable operation under various loading scenarios. For applications requiring rapid movements, this linear set can withstand maximum acceleration amax and can operate within a permissible ambient temperature range without compromising functionality. Additional technical specifications such as outer diameter D, breakaway force, maximum permissible linear speed vmax, static load rating C, radial clearance settings, dynamic longitudinal moment load capacity ML, weight, and more provide detailed information about the product's capabilities. These Linear Sets are delivered pre-set to zero clearance but also allow for adjustments via an adjusting screw for radial clearance customization. The Bosch Rexroth LINEAR-SET LSATE-A-16-DD is also available as a Linear Motion Slide variant, catering to different application needs while maintaining the same quality standards. It represents a robust solution for precise linear guidance in various automation tasks or machine-building projects where accuracy and durability are paramount.
Linear set (aluminum), TE-A-16, with two seals
Linear set (aluminum)
Tandem, adjustable
With super LB A
Shaft diameter d = 16
With two seals
Version: Standard
Unpacked Weight: 0.394 kg
For zero-clearance or preloaded guides. Adjusting screw for adjusting radial clearance. These Linear Sets come set to zero clearance.
| Lightweight precision tandem housing (aluminum) |
| Two super linear bushings A |
| Reference edge |
| External seals |
| Relubricatable |
| Also available as linear motion slide. |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Size V | 5 |
| Size E5 | 28 |
| Series | Super A (with self-alignment feature) |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Size B1 (linear bushing) | 53 |
| Footnote dynamic load capacity C | Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading. If the direction of loading is not the main direction of loading, the load capacities must be multiplied by the following factors: Ø d 10 to 16: f = 0.82, f0 = 0.86, Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| Size H | 22 |
| Max. acceleration amax | 150 |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Outer diameter D | 26 |
| Size H3 | 12 |
| Breakaway force | 2 |
| Size H4 | 13 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 26 |
| Footnote static load capacity C0 | Load capacity when both linear bushings are under equal load. The load capacities apply for the main direction of loading. If the direction of loading is not the main direction of loading, the load capacities must be multiplied by the following factors: Ø d 10 to 16: f = 0.82, f0 = 0.86, Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| Static load rating C0 | 1660 |
| Size M | 26.5 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Size N3 | 13 |
| Friction force | 1 |
| Radial clearance | Comes clamped to h5 shaft (lower limit) and set to zero-clearance |
| Productgroup ID | 17 |
| Size N2 | 21 |
| Size E3 | 64 |
| Permissible ambient temperature (max) | |
| Dynamic longitudinal moment load capacity ML | 18 |
| Size E4 | 40 |
| Size SW | 3 |
| Permissible ambient temperature (min) | |
| Size S4 | 4 |
| Shaft diameter d | 16 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear sets with linear bushings |
| Format of linear bushings | TE – Tandem, adjustable |
| Dynamic load capacity C | 2430 |
| Static longitudinal moment load capacity ML0 | 13 |
| Size L | 84 |
| Size E6 | 42 |
| Size S2 | 5.3 |
| Weight | 0.394 |
| Size D1 with tolerance | |
| Size H1 | 42 |
General technical data
|
Ø d |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
amax |
m/s² |
150 | |||||||
|
vmax 1) |
m/s |
3 | |||||||
|
m |
kg |
0.2 | 0.27 | 0.41 | 0.72 | 1.35 | 2.01 | 3.67 | 6.3 |
|
FR 2) |
N |
0.5 | 0.8 | 1 | 1.5 | 2 | 2.5 | 3 | 4 |
|
Breakaway force |
N |
1 | 1.5 | 2 | 3 | 4.5 | 6 | 8 | 10 |
|
Radial clearance |
Comes clamped to h5 shaft (lower limit) and set to zero clearance | ||||||||
|
Operating conditions |
|||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | ||||||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
Load capacities and load moments
|
Ød |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
1180 | 1660 | 2430 | 4010 | 8180 | 9520 | 16360 | 23930 |
|
C0 1) |
N |
760 | 980 | 1660 | 2680 | 4940 | 7140 | 11140 | 16560 |
|
ML |
Nm |
17 | 26 | 18 | 84 | 141 | 289 | 576 | 1097 |
|
ML0 |
Nm |
12 | 16 | 13 | 54 | 86 | 206 | 374 | 725 |
| 1) | Load rating when both Linear Bushings are under equal load. The load ratings apply for the main direction of loading. If the load direction is not the main direction of loading, the dynamic load ratings must be multiplied by the following factors:Ø d 10 to 16: f = 0.82, f0 = 0.86,Ø d 20 to 50: f = 0.82, f0 = 0.78 |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
ML |
Dynamic longitudinal moment load capacity |
Nm |
|
ML0 |
Static longitudinal moment load capacity |
Nm |
|
vmax |
Maximum permissible speed |
m/s |
Impact of load direction on load rating of closed Linear Bushings
The listed load ratings should be chosen depending on installation in minimum or maximum position and should be based on the calculations. If the load direction is clearly defined and the Linear Bushings can be installed in maximum position, the load ratings Cmax. (dynamic load rating) and C0 max (static load rating) can be used. If aligned installation is not possible or the load direction is not defined, the minimum load ratings must be used.
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
| 1) | fs = factor |
| 2) | s = movement path |
Reduced load capacity with high load
If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.
Definition of dynamic load ratings
Self-alignment feature
The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).
Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.
| FR = Frictional drag | |
| s = travel distance | |
| v = travel speed | |
| a) | Super Linear Bushing, A Ød 20 |
| b) | Conventional Linear Bushing, Ød 20 |
| a) | Lubricating hole M8 x 1 sealed with plastic cap |
Dimensions
|
Ød |
mm |
10 | 12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
D |
mm |
19 | 22 | 26 | 32 | 40 | 47 | 62 | 75 |
|
B1 |
mm |
40 | 43 | 53 | 60 | 78 | 87 | 108 | 132 |
|
E3 |
52 mm ±0.15 | 56 mm ±0.15 | 64 mm ±0.15 | 76 mm ±0.15 | 94 mm ±0.15 | 106 mm ±0.15 | 124 mm ±0.15 | 160 mm ±0.2 | |
|
E4 |
29 mm ±0.15 | 32 mm ±0.15 | 40 mm ±0.15 | 45 mm ±0.15 | 60 mm ±0.15 | 68 mm ±0.15 | 86 mm ±0.15 | 108 mm ±0.2 | |
|
E5 |
mm |
20 | 24 | 28 | 32 | 42 | 52 | 60 | 80 |
|
E6 |
mm |
31 | 34 | 42 | 50 | 64 | 72 | 90 | 108 |
|
H |
mm |
16 | 18 | 22 | 25 | 30 | 35 | 45 | 50 |
|
Tolerance for H 1) |
µm |
+ 8 - 16 |
|||||||
|
H1 |
mm |
31.5 | 35 | 42 | 50 | 60 | 70 | 90 | 105 |
|
H3 |
mm |
9 | 10 | 12 | 13 | 15 | 16 | 20 | |
|
H4 |
mm |
10 | 13 | 16 | 20 | 22 | 28 | 37 | |
|
L |
mm |
70 | 76 | 84 | 104 | 130 | 152 | 176 | 224 |
|
M 1) |
20 mm ±0.01 | 21.5 mm ±0.01 | 26.5 mm ±0.01 | 30 mm ±0.01 | 39 mm ±0.01 | 43.5 mm ±0.01 | 54 mm ±0.01 | 66 mm ±0.01 | |
|
N2 |
mm |
15 | 16.5 | 21 | 24 | 29 | 34 | 44 | 49 |
|
N3 |
mm |
11 | 13 | 18 | 22 | 26 | 35 | ||
|
S2 2) |
mm |
4.3 | 5.3 | 6.6 | 8.4 | 10.5 | 13.5 | ||
|
S3 |
M5 | M6 | M8 | M10 | M12 | M16 | |||
|
S4 3) |
mm |
4 | 5 | 6 | 8 | 10 | |||
|
SW |
mm |
2.5 | 3 | 4 | 5 | 6 | 8 | ||
|
V |
mm |
5 | 6.5 | 8 | 10 | 12 | |||
| 1) | Clamped (fastened) in relation to Ø d. |
| 2) | Fixing screws ISO 4762-8.8 |
| 3) | Pin hole centering. |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice. The adjustable Linear Sets come clamped to an h5 shaft (lower limit) and set to zero clearance.
Vertical dimension
The tolerance values for the vertical dimension "H" for the Linear Sets shown in the table have been determined from statistics and correspond to values expected in practice.
Bolts
We recommend bolts in accordance with ISO 4762-8.8 for fastening the Linear Sets.
Lubrication
On-shaft relubrication on relubricatable Linear Bushing only until lubricant seeps out.
General mounting instructions
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for closed-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Metal cases for Super Linear Bushings and standard Linear Bushings
Metal cases for Super Linear Bushings and standard Linear Bushings
Galvanized steelCatalog
Instructions
Service
CAD data
Hydraulic-type lube nipple according to DIN 71412 Form A
Hydraulic-type lube nipple according to DIN 71412 Form A
Catalog
Instructions
Service
Funnel-type lube nipple according to DIN 3405 Form A
Funnel-type lube nipple according to DIN 3405 Form A
Catalog
Instructions
Service