BOSCH REXROTH
R081001054
$1.46 USD
- BOSCH REXROTH
- Material:R081001054
- Model:AN10X12N
Quantity in stock: 0
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Bosch Rexroth directly.***
The Bosch Rexroth TOLERANCE RING AN10X12N (R081001054) is a precision-engineered component designed to facilitate the secure and fixed connection of machine parts. This particular model, made from corrosion-resistant stainless steel, boasts a nominal size of 10mm x 12mm, ensuring a large tolerance zone when connecting parts. The tolerance ring features circumferential flat edges on its outer diameter, which are specifically intended for use with standard nominal shafts. The AN10X12N model is notable for its ability to compensate for differences in thermal expansion between connected machine elements constructed from different materials. This characteristic is particularly valuable in applications where high temperature stability is required, as the ring can withstand continuous temperatures up to a certain degree Celsius and short-term exposure to even higher temperatures. Installation of this tolerance ring is both quick and economical, contributing to an overall reduction in assembly time and costs. The design eliminates the need for keyways or other positive-locking connections, simplifying the design of connecting parts. Despite its simplicity, it offers an extremely secure connection that resists various types of chemical stresses. The product's specifications include a transferable torque value and permissible radial load capacity, although it's recommended to consult with Bosch Rexroth for specific values under pulsating and alternating loads. The weight of the tolerance ring is minimal, adding negligible mass to the assembly. Overall, the Bosch Rexroth TOLERANCE RING AN10X12N (R081001054) represents an extremely cost-effective solution for creating reliable connections in machinery without compromising on performance or durability. Special sizes are available upon request to meet unique application requirements.
The Bosch Rexroth TOLERANCE RING AN10X12N (R081001054) is a precision-engineered component designed to facilitate the secure and fixed connection of machine parts. This particular model, made from corrosion-resistant stainless steel, boasts a nominal size of 10mm x 12mm, ensuring a large tolerance zone when connecting parts. The tolerance ring features circumferential flat edges on its outer diameter, which are specifically intended for use with standard nominal shafts. The AN10X12N model is notable for its ability to compensate for differences in thermal expansion between connected machine elements constructed from different materials. This characteristic is particularly valuable in applications where high temperature stability is required, as the ring can withstand continuous temperatures up to a certain degree Celsius and short-term exposure to even higher temperatures. Installation of this tolerance ring is both quick and economical, contributing to an overall reduction in assembly time and costs. The design eliminates the need for keyways or other positive-locking connections, simplifying the design of connecting parts. Despite its simplicity, it offers an extremely secure connection that resists various types of chemical stresses. The product's specifications include a transferable torque value and permissible radial load capacity, although it's recommended to consult with Bosch Rexroth for specific values under pulsating and alternating loads. The weight of the tolerance ring is minimal, adding negligible mass to the assembly. Overall, the Bosch Rexroth TOLERANCE RING AN10X12N (R081001054) represents an extremely cost-effective solution for creating reliable connections in machinery without compromising on performance or durability. Special sizes are available upon request to meet unique application requirements.
Tolerance ring (AN), size = 10 X 12, corrosion-resistant steel
Tolerance ring
Type AN: The circumferential flat edges are located on the outer diameter of the tolerance ring. For use with a standard nominal shaft.
Tolerance ring diameter (d) = 10
Tolerance ring width (b) = 12
Stainless steel
Unpacked Weight: 0.00063 kg
The circumferential flat edges are located on the outer diameter of the tolerance ring. For use with a standard nominal shaft.
| Quick, economic installation |
| Compensates the differences in thermal expansion between machine elements made of different materials |
| Eliminates the need for keyways or other positive-locking connections |
| Connecting parts have a simple design |
| High temperature stability |
| Special sizes available on request |
| Extremely low-cost machine element |
| Resistant to various types of chemical stress |
| Fixed and secure connection of machine parts |
| Large tolerance zone with connecting parts |
| High temperature stability |
| Connecting parts have a simple design |
| Eliminates the need for keyways or other positive-locking connections |
| Quick, economic installation |
| Compensates the differences in thermal expansion between machine elements made of different materials |
| Data Sheet | Download Data Sheet |
| Productgroup ID | 17 |
| Size b | 12 |
| Material footnote | Up to 250 °C continuous temperature, short-term up to 300°C |
| Size d | 10 |
| Transferable torque footnote 1 | Observe the general technical notes and information. |
| Transferable torque footnote 2 | In case of free installation with 20% reduction, see section “Calculations” for the guideline values |
| Permissible radial load footnote 2 | Considerably smaller values are permitted for pulsating and alternating loads. Please consult us. |
| Weight | 0.00063 |
| Transferable torque | 3.5 |
| Permissible radial load | 2600 |
| Nominal size | 10 x 12 |
General technical data
|
Size |
F 1) 2) |
M 1) 3) |
m 4) |
|
N |
Nm |
kg |
|
| 6 x 6 | 600 | 0.5 | 0.16 |
| 10 x 4 | 1000 | 1 | 0.25 |
| 10 x 6 | 1500 | 2 | 0.35 |
| 10 x 10 | 2100 | 3 | 0.6 |
| 10 x 12 | 2600 | 3.5 | 0.78 |
| 12 x 6 | 1800 | 2 | 0.4 |
| 12 x 10 | 2400 | 3.5 | 0.7 |
| 12 x 12 | 2900 | 4.2 | 0.8 |
| 14 x 8 | 2000 | 5.5 | 0.65 |
| 14 x 12 | 3700 | 7.5 | 0.95 |
| 14 x 14 | 4200 | 8 | 1.1 |
| 15 x 8 | 2200 | 6.5 | 0.7 |
| 15 x 12 | 4000 | 8.5 | 1 |
| 15 x 14 | 4700 | 10 | 1.25 |
| 16 x 8 | 2400 | 7 | 0.7 |
| 16 x 10 | 2800 | 8 | 0.9 |
| 16 x 12 | 3500 | 9.5 | 1.05 |
| 18 x 6 | 1900 | 6 | 0.9 |
| 18 x 10 | 4300 | 11 | 1.5 |
| 18 x 16 | 8000 | 17 | 2.4 |
| 19 x 6 | 1900 | 7 | 0.95 |
| 19 x 10 | 4500 | 13 | 1.6 |
| 19 x 16 | 8500 | 21 | 2.5 |
| 20 x 12 | 6100 | 18 | 2.05 |
| 20 x 16 | 8500 | 24 | 2.65 |
| 20 x 20 | 12000 | 30 | 3.3 |
| 1) | Observe the general technical notes and information. |
| 2) | Considerably smaller values are permitted for pulsating and alternating loads. Please consult us. |
| 3) | In case of free installation with 20% reduction, see section “Calculations” for the guideline values |
| 4) | Per 1000 pieces |
Legend
|
Symbol |
Description |
Unit |
|
F |
Permissible radial load |
N |
|
M |
Transferable torque |
Nm |
|
m |
Mass |
kg |
Tolerances for shafts and holes
Technical data
| 1) | Free installation |
| 2) | Centered installation |
Dimensions
|
Size |
Tolerance ring dimensions |
Connection dimensions 1) |
|||
|
Antifriction bearing installation |
Torque transmission |
||||
|
d |
b |
d' h9 |
D' |
D' |
|
|
mm |
mm |
mm |
mm |
mm |
mm |
| 6 x 6 | 6 | 6 | 6 |
6.985 6.93 |
6.86 6.82 |
| 10 x 4 | 10 | 4 | 10 |
11.48 11.41 |
11.3 11.23 |
| 10 x 6 | 6 | ||||
| 10 x 10 | 10 | ||||
| 10 x 12 | 12 | ||||
| 12 x 6 | 12 | 6 | 12 |
13.48 13.41 |
13.3 13.23 |
| 12 x 10 | 10 | ||||
| 12 x 12 | 12 | ||||
| 14 x 8 | 14 | 8 | 14 |
15.48 15.41 |
15.3 15.23 |
| 14 x 12 | 12 | ||||
| 14 x 14 | 14 | ||||
| 15 x 8 | 15 | 8 | 15 |
16.48 16.41 |
16.3 16.23 |
| 15 x 12 | 12 | ||||
| 15 x 14 | 14 | ||||
| 16 x 8 | 16 | 8 | 16 |
17.48 17.41 |
17.3 17.23 |
| 16 x 10 | 10 | ||||
| 16 x 12 | 12 | ||||
| 18 x 6 | 18 | 6 | 18 |
19.98 19.89 |
19.75 19.67 |
| 18 x 10 | 10 | ||||
| 18 x 16 | 16 | ||||
| 19 x 6 | 19 | 6 | 19 |
20.98 20.89 |
20.75 20.67 |
| 19 x 10 | 10 | ||||
| 19 x 16 | 16 | ||||
| 20 x 12 | 20 | 12 | 20 |
21.98 21.89 |
21.75 21.67 |
| 20 x 16 | 16 | ||||
| 20 x 20 | 20 | ||||
| 1) | Observe the general technical notes and information. |