BOSCH REXROTH
R067124040
$193.52 USD
- BOSCH REXROTH
- Material:R067124040
- Model:KBA-O-40-DD
Quantity in stock: 0
The Bosch Rexroth SUPER LINEAR BUSH KBA-O-40-DD (R067124040) is a high-quality linear bushing designed for precision linear motion applications. It features an open design with a self-alignment capability, which compensates for shaft deflection and misalignment, ensuring smooth travel and a long service life. The bushing is equipped with two seals to protect against contaminants and does not require initial lubrication, which simplifies maintenance. With its steel bearing plates and meticulously machined ball guide grooves, this linear bushing offers exceptional travel smoothness. It can handle high travel speeds up to a maximum of 5 meters per second, making it suitable for applications requiring rapid motion. The integrated wiper seals can be either external or absent depending on the requirement, while the ball retainer and outer sleeve are constructed from durable PA or POM materials. The balls themselves are made from rolling bearing steel, ensuring robust performance. The SUPER LINEAR BUSH has multiple rows of balls that contribute to its dynamic load capacity and stability under load. Its friction coefficient varies based on load and lubrication conditions but remains low to ensure efficient operation. The product operates within an ambient temperature range of -30°C to +80°C and has a size E of 40 mm with an outer diameter (D) of 62 mm. This linear bushing is designed to support high loads with its static load rating (C0) and dynamic load capacity (C). Its breakaway force ensures reliable operation even at start-up, while the friction force remains minimal across various conditions. With its comprehensive design features, the Bosch Rexroth SUPER LINEAR BUSH KBA-O-40-DD is ideal for use in linear motion systems where precision and durability are paramount.
Super LB A, open, 40, with two seals
Super linear bushing
Super A (with self-alignment feature)
Open
Shaft diameter d = 40
With two seals
Unpacked Weight: 0.329 kg
| Low-cost linear bushing for high requirements |
| Steel bearing plates with machined ball guide grooves and optimized ball lead-in chamfers for outstandingly smooth travel and a long service life |
| Compensates for shaft deflection and misalignment up to 30' |
| Open linear bushing on fully supported shafts for applications where other linear guides tend to warp due to imprecise substructures. |
| High travel speed (5 m/s) |
| With longitudinal seal |
| No initial lubrication |
| Integrated wiper seals, external seals or no wiper seals |
| Ball retainer and outer sleeve made of PA or POM |
| Balls made of rolling bearing steel |
| Data Sheet | Download Data Sheet |
| 2D CAD | Download 2D CAD |
| 2D CAD | Download 2D CAD |
| 3D CAD | Download 3D CAD |
| 3D CAD | Download 3D CAD |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Manual | Download Manual |
| Rows of balls | 5 |
| Series | Super A (with self-alignment feature) |
| Footnote friction force FR | One wiper seal: Multiply value with factor 0.5 |
| Size C1 H13 | 60.3 |
| Footnote dynamic load capacity C | The load capacities apply for the main direction of loading. |
| Max. acceleration amax | 150 |
| Footnote friction coefficient μ | Friction coefficients of unsealed linear bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
| Permissible ambient temperature | -10 °C ... +80 °C |
| Size E | 19.5 |
| Outer diameter D | 62 |
| Breakaway force | 8 |
| Maximum permissible linear speed vmax | 3 |
| Size D | 62 |
| Friction coefficient μ | 0,001 ... 0,0025 |
| Footnote static load capacity C0 | The load capacities apply for the main direction of loading. |
| Static load rating C0 | 4480 |
| Size C h13 | 80 |
| Size C2 | 2.15 |
| Friction coefficient μ max. | 0.0025 |
| Note: Maximum permissible speed vmax | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| Friction force | 3 |
| Friction coefficient μ min. | 0.001 |
| Productgroup ID | 17 |
| Permissible ambient temperature (max) | |
| Angle α | 56 |
| Permissible ambient temperature (min) | |
| Friction force FR footnote 2 | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Footnote breakaway force | One wiper seal: Multiply value with factor 0.5 |
| Shaft diameter d | 40 |
| Linear guide type | Linear bushing and shaft |
| Filter for linear bushings and shafts | Linear bushings |
| Format of linear bushings | O – Open |
| Dynamic load capacity C | 8620 |
| Weight | 0.329 |
| Size D1 with tolerance | |
| Radial clearance shaft h6/bore K7 | |
| Radial clearance shaft/bore h6/H7 | |
| Radial clearance shaft h6/bore M7 |
General technical data
|
Ø d |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 | |||||||
|
amax |
m/s² |
150 | |||||||||||||
|
vmax 1) |
m/s |
3 | |||||||||||||
|
m |
kg |
0.018 | 0.022 | 0.051 | 0.102 | 0.155 | 0.3 | 0.48 | |||||||
|
FR 2) 3) |
N |
0.8 | 3 4) | 1 | 4 4) | 1.5 | 5 4) | 2 | 6 4) | 2.5 | 8 4) | 3 | 10 4) | 4 | 12 4) |
|
Breakaway force 2) |
N |
1.5 | 6 4) | 2 | 9 4) | 3 | 10 4) | 4.5 | 14 4) | 6 | 18 4) | 8 | 24 4) | 10 | 30 4) |
|
μ 5) |
0.001 ... 0.0025 | ||||||||||||||
|
Rows of balls |
4 | 5 | |||||||||||||
|
Shaft radial clearance h6/bore H7 |
µm |
+ 38 + 10 |
+ 43 + 11 |
+ 50 + 12 |
|||||||||||
|
Shaft radial clearance h6/bore K7 |
µm |
+ 23 - 5 |
+ 25 - 7 |
+ 29 - 9 |
|||||||||||
|
Shaft radial clearance h6/bore M7 |
µm |
+ 17 - 11 |
+ 18 - 14 |
+ 20 - 18 |
|||||||||||
|
Operating conditions |
|||||||||||||||
|
Permissible ambient temperature (min ... max) |
-10 °C ... +80 °C | ||||||||||||||
| 1) | Speeds of up to 5 m/s possible. Service life is limited by heightened wear to plastic parts. Tests have shown total travel from 50 • 105 m to 100 • 105 m without failure. |
| 2) | One wiper seal: Multiply by a factor of 0.5. |
| 3) | Frictional drags generated by Linear Bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| 4) | For fully sealed Linear Bushings |
| 5) | Friction coefficients of unsealed Linear Bushings when lubricated with oil. The friction coefficient is lowest under heavy load, but can still be above the specified value even under a low load. |
Load capacities and load moments
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 |
|
C 1) |
N |
1060 | 1500 | 2570 | 5040 | 5020 | 8620 | 12500 |
|
C0 1) |
N |
510 | 830 | 1180 | 2470 | 2880 | 4480 | 6620 |
| 1) | The load ratings apply for the main direction of loading. |
| The load ratings are based on a total travel of 100, 00 m. When based on 50 000 m, the values in the table need to be multiplied by 1.26. |
Legend
|
Symbol |
Description |
Unit |
|
Ød |
Shaft diameters |
mm |
|
amax |
Maximum acceleration travel |
m/s2 |
|
C |
Dynamic load capacity |
N |
|
C0 |
Static load capacity |
N |
|
FR |
Friction force |
N |
|
m |
Mass |
kg |
|
vmax |
Maximum permissible speed |
m/s |
|
μ |
Friction coefficient |
For load in the direction of opening, please refer to the loading diagrams (see "Diagrams" section).
Impact of load direction on load rating of open Linear Bushings
The load ratings C and C0 apply for the main direction of loading ρ = 0°. For all other load directions, the load ratings must be multiplied by the factors fρ (dynamic load rating C) or fρ0 (static load rating C0).
Installing specific Linear Bushings can prevent reductions in load capacity (see Linear Set with side opening).
Reduced load capacity with short stroke
In case of short stroke, the service life of the shaft is less than that of the super Linear Bushing. The load ratings C specified in the tables must therefore be multiplied by the factor f.s .
Reduced load capacity with high load
If the load F on a Super Linear Bushing A is more than F > 0.5 x C, the dynamic load rating C decreases.
Definition of dynamic load ratings
Self-alignment feature
The self-alignment feature in the steel bearing plates and machined ball guide grooves ensure quieter travel. The flow chart shows a comparison with a conventional Linear Bushing. The example is based on a load of 800 N and misalignment of about 8 ft (caused by shaft deflection).
Due to the self-alignment feature, two super Linear Bushings must be used on at least one of the shafts in the guide.
| FR = Frictional drag | |
| s = travel distance | |
| v = travel speed | |
| a) | Super Linear Bushing, A Ød 20 |
| b) | Conventional Linear Bushing, Ød 20 |
Sealing
Super linear bushings come both with integrated and separate wiper seals. The separate wiper seals are specially designed for applications in high contamination environments. An additional seal (for example, bellows, extendable cover) is necessary for extremely high contamination environments. The open super linear bushings can also come fully sealed (with longitudinal seal), however this increases friction.
Dimensions
|
Ød |
mm |
12 | 16 | 20 | 25 | 30 | 40 | 50 | |
|
D |
mm |
22 | 26 | 32 | 40 | 47 | 62 | 75 | |
|
α |
° |
66 | 68 | 55 | 57 | 56 | 54 | ||
|
C |
h13 |
mm |
32 | 36 | 45 | 58 | 68 | 80 | 100 |
|
C1 |
H13 |
mm |
22.6 | 24.6 | 31.2 | 43.7 | 51.7 | 60.3 | 77.3 |
|
C2 |
mm |
1.3 | 1.6 | 1.85 | 2.15 | 2.65 | |||
|
E 1) |
mm |
6.5 | 9 | 11.5 | 14 | 19.5 | 22.5 | ||
| 1) | Minimum size in relation to Ø d. |
Radial clearance
The radial clearance values shown in the table have been determined from statistics and correspond to values expected in practice.
Adjusting radial clearance
The radial clearance of all Linear Bushings can be adjusted. If, for instance, a zero-clearance guideway is needed, the radial clearance of the Linear Bushing must be reduced using the adjusting screw on the housing (see also Linear Sets) until slight resistance occurs when rotating the shaft. Secure the adjusting screw for applications where vibrations are present.
Adjusting preload
For preloading, the aforementioned adjustment is made using an adjustment shaft that is weaker by the degree of preload.
Customer-built housings
General mounting instructions
Initial lubrication
Linear bushings do not come with initial lubrication. Grease the Linear Bushings before use. Service life data is based on initial lubrication and relubricated Linear Bushings.
Grooved taper pin
Grooved taper pin
Catalog
Instructions
Service
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Wiper seals for open-type Super Linear Bushings and Standard Linear Bushings
Galvanized metal case Elastomer wiper sealCatalog
Instructions
Service
CAD data
Locating screws for super linear bushings A and B
Locating screws for super linear bushings A and B
Locating screws are self-locking.Catalog
Instructions
Service